Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Z. Chen et al., “Beam Diagnostic at SDUV-FEL”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper FROA3, pp. 711-713.
[n] P. Evtushenko, A. Freyberger, C. Liu, and A. H. Lumpkin, “Near-field Optical Diffraction Radiation Measurements at CEBAF”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper WECOTC01, pp. 332-336.
[n] S. Takeuchi and M. Matsuda, “First Three Year Operational Experience with the JAERI Tandem-Booster”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A26, pp. 237-247.
[n] R. Geller, “Sources of Highly Charged Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 88-93.
[n] R. Fleischhauer, B. Kuner, G. Meyer, J. Rahn, and C. Winkler, “Integrating PLCs with an OPC Interface into an EPICS Based Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP534, pp. XX-XX.
[n] C. M. Fortgang, Y. K. Batygin, R. W. Garnett, S. S. Kurennoy, and L. Rybarcyk, “A Specialized MEBT Design for the LANSCE H+ RFQ Upgrade Project”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM17, pp. 670-672.
[n] R. Li and C.-Y. Tsai, “Entrance and Exit CSR Impedance for Non-Ultrarelativistic Beam”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3214-3217. doi:10.18429/JACoW-IPAC2017-WEPIK113
[n] E. Fol, J. M. Coello de Portugal, and R. Tom?ís, “Application of Machine Learning to Beam Diagnostics”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 169-176. doi:10.18429/JACoW-IBIC2018-TUOA02
[n] J. Teichert et al., “Dark Current in Superconducting RF Photoinjectors ÔÇô Measurements and Mitigation”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper WG503, pp. 75-79.
[n] G. Gulbekyan and I. Ivanenko, “Design of the Central Region of the New Multi-Purpose Cyclotron U400R”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper D-01, pp. 282-285.
[n] Yu. A. Bashmakov, “Crystal Horn for Neutrino Beam Formation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP3A06, pp. 2225-2227.
[n] M. White et al., “Performance of the Advanced Photon Source (APS) Linear Accelerator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA11, pp. 1073-1075.
[n] R. J. Steinhagen, A. Boccardi, E. Calvo Giraldo, M. Gasior, J. L. Gonzalez, and O. R. Jones, “On the Continuous Measurement of the LHC Beta-Function - Prototype Studies at the SPS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP037, pp. 3528-3530.
[n] O. Mete Apsimon, K. Hanahoe, T. H. Pacey, and G. X. Xia, “A Gas-filled Capillary Based Plasma Source for Wakefield Experiments”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2613-2616. doi:10.18429/JACoW-IPAC2016-WEPMY026
[n] H. Tomizawa et al., “Status of SPring-8 Photocathode Rf Gun for Future Light Sources”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP042, pp. XX-XX.
[n] C. Yao and W. E. Norum, “Bunch Current and Phase Detection for the APS PAR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP006, pp. 3447-3449.
[n] E. Piselli, A. Akroh, S. Rothe, D. Leimbach, K. Blaum, and M. Door, “CERN Accelerators Beam Optimization Algorithm”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1383. doi:10.18429/JACoW-ICALEPCS2019-WEPHA124
[n] M. Holding, C. M. Hammons, B. R. Lang, G. R. Murdoch, K. G. Potter, and R. T. Roseberry, “Engineering the SNS RTBT/Target Interface for Remote Handling”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE033, pp. 2278-2280.
[n] A. Noda et al., “Magnet System of Heavy Ion Synchrotron and Cooler Ring, TARN II”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-01, pp. 284-287.
[n] D. Horan, L. Solita, D. Reigle, and N. Dimonte, “Design and Construction of the Advanced Photon Source 352-MHz RF System Switching Control”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P037, pp. 3690-3692.
[n] M. Volpi et al., “High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4552-4555. doi:10.18429/JACoW-IPAC2018-THPMK104
[n] I. Sugai et al., “Lifetime Comparisons of Single and Double Layered HBC-Foils using 3.2MeV Ne+ Ion Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP107, pp. 3617-3619.
[n] F. Wolfheimer, E. Gjonaj, and T. Weiland, “Parallel Particle-In-Cell (OIC) Codes”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper THM1MP02, pp. 290-295.
[n] A. Will, A. Bernhard, A.-S. Mueller, C. Widmann, and M. Kaluza, “Detailed Analysis of a Linear Beam Transport Line from a Laser Wakefield Accelerator to a Transverse-Gradient Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1711-1714. doi:10.18429/JACoW-IPAC2017-TUPIK014
[n] G. R. Bower, R. Arnold, N. Sinev, Y. Sugimoto, and M. Woods, “Disruption of Particle Detector Electronics by Beam Generated EMI”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS041, pp. 3094-3096.
[n] E. Bjorklund and S. A. Baily, “Tailoring the Hardware to Your Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THAAUST01, pp. 1171-1173.
[n] R. Baartman et al., “Status Report on the TRIUMF Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper C03, pp. 203-206.
[n] J.-C. Chang et al., “Experimental Validated CFD Analysis on Helium Discharge”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 156-158. doi:10.18429/JACoW-MEDSI2016-TUPE02
[n] C. Yao and N. P. Di Monte, “Initial Performance Results of the APS P0 Feedback System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA15, pp. 550-552.
[n] O. I. Meshkov et al., “Direct Comparison of the Methods of Beam Energy Spread Determination in the VEPP-4M Collider”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB06, pp. 244-246.
[n] M. Ferrario et al., “SPARC Photoinjector Working Point Optimization, Tolerances and Sensitivity to Errors”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF041, pp. 396-398.
[n] P. A. Wegner et al., “Status of the ACS-based Control System of the Mid-sized Telescope Prototype for the Cherenkov Telescope Array (CTA)”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOAAB02, pp. 987-991.
[n] I. V. Agapov, R. Brinkmann, Y.-C. Chae, X. N. Gavald?á, J. Keil, and R. Wanzenberg, “Lattice Design for PETRA IV: Towards a Diffraction-Limited Storage Ring”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 12-16. doi:10.18429/JACoW-FLS2018-MOP1WB01
[n] R. Valdiviez et al., “The Final Mechanical Design, Fabrication, and Commissioning of a Wire Scanner and Scraper Assembly for Halo-Formation Measurements in a Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH045, pp. 1324-1326.
[n] O. Kamalou et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper FR1PB04, pp. 470-472.
[n] B. Deriy, A. L. Hillman, and J. Wang, “The New-Generation Power Supplies for the Circular Polarized Undulator at the APS”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP001, pp. 1532-1534.
[n] I. Oya et al., “A Readout and Control System for a CTA Prototype Telescope”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU026, pp. 494-497.
[n] T. Shaftan et al., “Seeded Harmonic Generation Schemes”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper FRM303, pp. XX-XX.
[n] D. Trbojevic, B. Parker, and M. Pullia, “Large Momentum Acceptance Superconducting NS-FFAG Gantry for Carbon Cancer Therapy”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THOAB2, pp. 1119-1121.
[n] S. Reiche and M. Carl?á, “Detailed Modeling of Seeded Free-electron Lasers”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper MOPD35, pp. 101-104.
[n] J. M. Meyer et al., “Tango for Experiment Control”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THIC01, pp. 118-120.
[n] M. A. Khojoyan et al., “Measurement and Simulation Studies of Emittance for Short Gaussian Pulses at PITZ”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB06, pp. 402-405.
[n] F. Schlander, E. Elsen, and D. Reschke, “Second Sound as an automated Quench Localisation Tool at DESY”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO031, pp. 785-787.
[n] A. V. Savilov, Yu. S. Oparina, and N. Yu. Peskov, “Terahertz Free Electron Maser Based on Excitation of a Talbot-Type Super-Mode in an Oversized Microwave System”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 87-90. doi:10.18429/JACoW-FEL2019-TUP020
[n] K. L. F. Bane, “Emittance Control for Very Short Bunches”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEYLH01, pp. 179-183.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Z. Chen et al., “Beam Diagnostic at SDUV-FEL”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper FROA3, pp. 711-713.
- P. Evtushenko, A. Freyberger, C. Liu, and A. H. Lumpkin, “Near-field Optical Diffraction Radiation Measurements at CEBAF”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper WECOTC01, pp. 332-336.
- S. Takeuchi and M. Matsuda, “First Three Year Operational Experience with the JAERI Tandem-Booster”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A26, pp. 237-247.
- R. Geller, “Sources of Highly Charged Ions”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 88-93.
- R. Fleischhauer, B. Kuner, G. Meyer, J. Rahn, and C. Winkler, “Integrating PLCs with an OPC Interface into an EPICS Based Control System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP534, pp. XX-XX.
- C. M. Fortgang, Y. K. Batygin, R. W. Garnett, S. S. Kurennoy, and L. Rybarcyk, “A Specialized MEBT Design for the LANSCE H+ RFQ Upgrade Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPSM17, pp. 670-672.
- R. Li and C.-Y. Tsai, “Entrance and Exit CSR Impedance for Non-Ultrarelativistic Beam”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3214-3217.
- E. Fol, J. M. Coello de Portugal, and R. Tom?ís, “Application of Machine Learning to Beam Diagnostics”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 169-176.
- J. Teichert et al., “Dark Current in Superconducting RF Photoinjectors ÔÇô Measurements and Mitigation”, in Proc. 53th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'13), Novosibirsk, Russia, Sep. 2013, paper WG503, pp. 75-79.
- G. Gulbekyan and I. Ivanenko, “Design of the Central Region of the New Multi-Purpose Cyclotron U400R”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper D-01, pp. 282-285.
- Yu. A. Bashmakov, “Crystal Horn for Neutrino Beam Formation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP3A06, pp. 2225-2227.
- M. White et al., “Performance of the Advanced Photon Source (APS) Linear Accelerator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA11, pp. 1073-1075.
- R. J. Steinhagen, A. Boccardi, E. Calvo Giraldo, M. Gasior, J. L. Gonzalez, and O. R. Jones, “On the Continuous Measurement of the LHC Beta-Function - Prototype Studies at the SPS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP037, pp. 3528-3530.
- O. Mete Apsimon, K. Hanahoe, T. H. Pacey, and G. X. Xia, “A Gas-filled Capillary Based Plasma Source for Wakefield Experiments”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2613-2616.
- H. Tomizawa et al., “Status of SPring-8 Photocathode Rf Gun for Future Light Sources”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP042, pp. XX-XX.
- C. Yao and W. E. Norum, “Bunch Current and Phase Detection for the APS PAR”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP006, pp. 3447-3449.
- E. Piselli, A. Akroh, S. Rothe, D. Leimbach, K. Blaum, and M. Door, “CERN Accelerators Beam Optimization Algorithm”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1383.
- M. Holding, C. M. Hammons, B. R. Lang, G. R. Murdoch, K. G. Potter, and R. T. Roseberry, “Engineering the SNS RTBT/Target Interface for Remote Handling”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE033, pp. 2278-2280.
- A. Noda et al., “Magnet System of Heavy Ion Synchrotron and Cooler Ring, TARN II”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I1-01, pp. 284-287.
- D. Horan, L. Solita, D. Reigle, and N. Dimonte, “Design and Construction of the Advanced Photon Source 352-MHz RF System Switching Control”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P037, pp. 3690-3692.
- M. Volpi et al., “High Power and High Repetition Rate X-band Power Source Using Multiple Klystrons”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4552-4555.
- I. Sugai et al., “Lifetime Comparisons of Single and Double Layered HBC-Foils using 3.2MeV Ne+ Ion Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP107, pp. 3617-3619.
- F. Wolfheimer, E. Gjonaj, and T. Weiland, “Parallel Particle-In-Cell (OIC) Codes”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper THM1MP02, pp. 290-295.
- A. Will, A. Bernhard, A.-S. Mueller, C. Widmann, and M. Kaluza, “Detailed Analysis of a Linear Beam Transport Line from a Laser Wakefield Accelerator to a Transverse-Gradient Undulator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1711-1714.
- G. R. Bower, R. Arnold, N. Sinev, Y. Sugimoto, and M. Woods, “Disruption of Particle Detector Electronics by Beam Generated EMI”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS041, pp. 3094-3096.
- E. Bjorklund and S. A. Baily, “Tailoring the Hardware to Your Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THAAUST01, pp. 1171-1173.
- R. Baartman et al., “Status Report on the TRIUMF Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper C03, pp. 203-206.
- J.-C. Chang et al., “Experimental Validated CFD Analysis on Helium Discharge”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 156-158.
- C. Yao and N. P. Di Monte, “Initial Performance Results of the APS P0 Feedback System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA15, pp. 550-552.
- O. I. Meshkov et al., “Direct Comparison of the Methods of Beam Energy Spread Determination in the VEPP-4M Collider”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB06, pp. 244-246.
- M. Ferrario et al., “SPARC Photoinjector Working Point Optimization, Tolerances and Sensitivity to Errors”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF041, pp. 396-398.
- P. A. Wegner et al., “Status of the ACS-based Control System of the Mid-sized Telescope Prototype for the Cherenkov Telescope Array (CTA)”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper WECOAAB02, pp. 987-991.
- I. V. Agapov, R. Brinkmann, Y.-C. Chae, X. N. Gavald?á, J. Keil, and R. Wanzenberg, “Lattice Design for PETRA IV: Towards a Diffraction-Limited Storage Ring”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 12-16.
- R. Valdiviez et al., “The Final Mechanical Design, Fabrication, and Commissioning of a Wire Scanner and Scraper Assembly for Halo-Formation Measurements in a Proton Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH045, pp. 1324-1326.
- O. Kamalou et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper FR1PB04, pp. 470-472.
- B. Deriy, A. L. Hillman, and J. Wang, “The New-Generation Power Supplies for the Circular Polarized Undulator at the APS”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP001, pp. 1532-1534.
- I. Oya et al., “A Readout and Control System for a CTA Prototype Telescope”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU026, pp. 494-497.
- T. Shaftan et al., “Seeded Harmonic Generation Schemes”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper FRM303, pp. XX-XX.
- D. Trbojevic, B. Parker, and M. Pullia, “Large Momentum Acceptance Superconducting NS-FFAG Gantry for Carbon Cancer Therapy”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THOAB2, pp. 1119-1121.
- S. Reiche and M. Carl?á, “Detailed Modeling of Seeded Free-electron Lasers”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper MOPD35, pp. 101-104.
- J. M. Meyer et al., “Tango for Experiment Control”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THIC01, pp. 118-120.
- M. A. Khojoyan et al., “Measurement and Simulation Studies of Emittance for Short Gaussian Pulses at PITZ”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEPB06, pp. 402-405.
- F. Schlander, E. Elsen, and D. Reschke, “Second Sound as an automated Quench Localisation Tool at DESY”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO031, pp. 785-787.
- A. V. Savilov, Yu. S. Oparina, and N. Yu. Peskov, “Terahertz Free Electron Maser Based on Excitation of a Talbot-Type Super-Mode in an Oversized Microwave System”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 87-90.
- K. L. F. Bane, “Emittance Control for Very Short Bunches”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEYLH01, pp. 179-183.
Back to search