Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. Asova et al., “Status of the Photo Injector Test Facility at DESY, Zeuthen Site (PITZ)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE010, pp. 2164-2166.
[n] M. Parro, F. Arranz, B. Brañas, D. Iglesias, and D. Rapisarda, “Recent Developments on the IFMIF/EVEDA Beam Dump Cooling Circuit”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS044, pp. 1632-1634.
[n] H. Dewa et al., “Photoelectron RF Gun Designed as a Single Cell Cavity”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF046, pp. 411-413.
[n] R. Leewe and K. Fong, “Simulation Analysis of Lorentz Force Induced Oscillations in RF Cavities in Vector Sum and Cw Operation”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1078-1081. doi:10.18429/JACoW-SRF2019-THP076
[n] J. Knobloch and H. Padamsee, “Microscopic Investigation of Field Emitters Located by Thermometry in 1.5 GHz Superconducting Niobium Cavities”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95B03, pp. 95-103.
[n] H. Hanaki, H. Dewa, S. Suzuki, K. Yanagida, T. Asaka, and T. Ohshima, “Evaluation of Beam Energy Fluctuations Caused by Phase Noises”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP093, pp. 273-275.
[n] T. Galek, K. Brackebusch, Sh. Gorgi Zadeh, and U. van Rienen, “Study of Higher Order Modes in Multi-Cell Cavities for BESSY-VSR Upgrade”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 412-414. doi:10.18429/JACoW-IPAC2014-MOPME017
[n] Y. Z. Wu, “Beijing Tau-Charm Factory Design Study”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6B011, pp. 321-323.
[n] L. Hagge, S. Eucker, B. List, N. J. Walker, and N. Welle, “Organizing the ILC Technical Design Documentation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS055, pp. 1656-1658.
[n] S. D. R?ñdel et al., “Status and Future Perspective of the TRIUMF E-Linac”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 70-73. doi:10.18429/JACoW-ERL2019-WEPNEC01
[n] M. Ikegami et al., “Beam Loss Mitigation in J-PARC Linac after the Tohoku Earthquake”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB096, pp. 401-403.
[n] H. X. Deng et al., “Status of Non-destructive Bunch Length Measurement based on Coherent Cherenkov Radiation”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME049, pp. 583-585.
[n] V. Chohan et al., “Testing of the LHC Magnets in Cryogenic Conditions: Current Experience and Near Future Outlook”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT014, pp. 560-562.
[n] D. Kleinjan, “Arc and Convertor Current Transient Studies for Multi-cusp Cesiated Surface Conversion H? Source at Lansce”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1983-1985. doi:10.18429/JACoW-IPAC2019-TUPTS025
[n] H. Jin, Y. Choi, and S. Lee, “Progress and Plan of the Fast Protection System in the RAON Accelerator”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 296-298. doi:10.18429/JACoW-HB2018-WEP2PO015
[n] I. A. Miloichikova, A. A. Bulavskaya, Yu. M. Cherepennikov, A. A. Grigorieva, and S. Stuchebrov, “Geant4 Based Numerical Model of Accelerator for Simulation of High Energy Therapeutic Electron Beam Parameters”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA38, unpublished.
[n] V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1367-1370. doi:10.18429/JACoW-IPAC2016-TUPMR050
[n] A. Gonzalez, T. Maruta, P. Ostroumov, A. Plastun, K. Fukushima, and J. Wan, “Transverse beam dynamics studies in the FRIB accelerating cryomodules”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 618-621. doi:10.18429/JACoW-NAPAC2025-TUP102
[n] M. Patil et al., “Status and upgrade of the visible light diagnostics port for energy spread measurements at KARA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4764-4767. doi:10.18429/JACoW-IPAC2023-THPL123
[n] K. Hwang and J. Qiang, “FEL Simulation Using the Lie Method”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 240-245. doi:10.18429/JACoW-ICAP2018-TUPAF22
[n] M. G. Ibison et al., “Optical System Design for The ESS Proton Beam and Target Diagnostics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 347-349. doi:10.18429/JACoW-IPAC2016-MOPMR043
[n] M. Sawamura et al., “Fabrication of Superconducting Spoke Cavity for Compact Photon Source”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 212-214. doi:10.18429/JACoW-LINAC2016-MOPLR035
[n] P. Stabile et al., “Beam Position Monitor Electronics Upgrade for Fermilab Switchyard”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUPF19, pp. 365-368.
[n] B. T. McCuistian et al., “Temporal Spot Size Evolution of the DARHT First Axis Radiographic Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC066, pp. 1206-1208.
[n] I. Arredondo and J. Jugo, “Containerized Control Structure for Accelerators”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 816-821. doi:10.18429/JACoW-ICALEPCS2017-TUPHA170
[n] J. W. Amann et al., “Design of an 18 MW Beam Dump for 500 GeV Electron/Positron Beams at an ILC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE003, pp. 3341-3343.
[n] J. Peters, “Review of Negative Hydrogen Ion Sources High Brightness/High Current”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper FR1003, pp. 1031-1035.
[n] J. A. Uythoven et al., “Beam Induced Heating of the SPS Fast Pulsed Magnets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT035, pp. 623-625.
[n] V. Kain et al., “High Intensity Commissioning of the SPS LSS4 Extraction for CNGS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN096, pp. 1604-1606.
[n] E. Jauregi et al., “High Current Switch-mode Power Converter Prototype for LHC Project 6kA, 8V”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT048, pp. 656-658.
[n] G. Franchetti, J. Struckmeier, K. Aulenbacher, and F. Zimmermann, “The Extreme Beams Initiative in EuCARD-2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 483-485. doi:10.18429/JACoW-IPAC2015-MOPJE073
[n] S. Sapkota, D. Posthuma de Boer, and E. Yamakawa, “Development of a Faraday cup for the FETS-FFA”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 208-212. doi:10.18429/JACoW-IBIC2025-MOPMO14
[n] K. W. Shepard, P. N. Potukuchi, and A. Roy, “Niobium Coaxial Quarter-Wave Cavities”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-89, pp. 287-289.
[n] D. Ondreka, H. Liebermann, and B. R. Schlei, “Optimization of the SIS18 Injector Operation for FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2088-2090. doi:10.18429/JACoW-IPAC2014-WEPRO061
[n] D. J. Crawford et al., “First Beam and High-Gradient Cryomodule Commissioning Results of the Advanced Superconducting Test Accelerator at Fermilab”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1831-1833. doi:10.18429/JACoW-IPAC2015-TUPJE080
[n] V. Zvyagintsev, R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, and Z. Y. Yao, “Coupler Design for RISP Spoke Cavity”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 372-374. doi:10.18429/JACoW-RUPAC2018-WEPSB47
[n] E. Cano Vargas et al., “Timing Stability Comparison Study of RF Synthesis Techniques”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 325-327. doi:10.18429/JACoW-FEL2019-WEP004
[n] F. Christie, J. R?Ânsch-Schulenburg, and M. Vogt, “A PolariX TDS for the FLASH2 Beamline”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 328-331. doi:10.18429/JACoW-FEL2019-WEP006
[n] S. K. Patch, B. M. Brahim, and D. Santiago-Gonzalez, “Robust Thermoacoustic Range Verification for Pulsed Ion Beam Therapy”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 294-297. doi:10.18429/JACoW-NAPAC2019-TUXBA3
[n] D. Sun, P. Datte, F. R. Huson, and W. W. MacKay, “RF Breakdown Test of SiO2 Coated Copper Electrodes”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 736-739.
[n] A. V. Shemchuk et al., “Magnetic Measurement System For The NICA Quadrupole Magnets”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 559-562. doi:10.18429/JACoW-RUPAC2016-THPSC010
[n] F. Hug et al., “Cryogenic Installations for Module Tests at Mainz”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 997-1002. doi:10.18429/JACoW-SRF2019-THP054
[n] F. Schlander, K. Aulenbacher, R. G. Heine, D. Simon, and T. Stengler, “1.3 GHz SRF Cryomodules for the Mainz Energy-recovering Superconducting Accelerator MESA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2853-2855. doi:10.18429/JACoW-IPAC2015-WEPMA041
[n] M. Fan, Z. Liptak, C. Wang, and Y. Wei, “Design of an online adjustable waveguide coupler for the TM020-mode cavity of proposed STCF”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1944-1947. doi:10.18429/JACoW-IPAC2025-WEPB113
[n] T. Saeki et al., “Study on Electro-Polishing Process by Niobium-Plate Sample With Artificial Pits”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO037, pp. 461-463.
[n] M. Labat, M. El Ajjouri, N. Hubert, D. Pedeau, M. Ribbens, and M.-A. Tordeux, “AXD Measurements at SOLEIL”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 209-212. doi:10.18429/JACoW-IBIC2016-MOPG61
[n] R. K. Bhandari and A. S. Divatia, “Design Aspects of an External Injection System for VEC, Calcutta”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B41, pp. 165-168.
[n] D. M. Dykes et al., “The Economic Optimisation of the Main Parameters of the 3 GeV Electron Booster Synchrotron for DIAMOND”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7B05, pp. 657-659.
[n] S. M. Polozov et al., “New Superconducting Linac Injector Project for Nuclotron-Nica: Current Results”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 627-629. doi:10.18429/JACoW-RUPAC2016-THPSC041
[n] D. H. Zhuang et al., “Improved Capacitive Coupling Type RF Power Couplers for a Cryomodule With Two 9-Cell Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB079, pp. 1313-1315.
[n] R. E. Pollock et al., “Infllection and Extraction Systems at the Indiana University Clyclotron Facility”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1094-1097.
[n] A. Plastun, T. Kanemura, and X. Wang, “Heavy ion implantation analysis in graphite for the FRIB charge selector”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 769-773. doi:10.18429/JACoW-NAPAC2025-WEP042
[n] R. Pearsons, A. Harvey, E. Hubbard, M. Schulze, and S. Sheynin, “APT High Energy Linac Intertank Assembly Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA81, pp. 3579-3581.
[n] N. Hu, Z. H. Bai, W. Li, Q. Luo, and L. Wang, “Estimates of Collective Effects in the HALS Storage Ring Having the First Version Lattice”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3770-3773. doi:10.18429/JACoW-IPAC2017-THPAB032
[n] B. Giaccone et al., “Plasma Processing to Reduce Field Emission in LCLS-II 1.3 GHz SRF Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1231-1238. doi:10.18429/JACoW-SRF2019-FRCAB7
[n] A. M. Kolano, R. J. Barlow, A. Adelmann, and C. Baumgarten, “A Precise Beam Dynamics Model of the PSI Injector 2 to Estimate the Intensity Limit”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1630-1631. doi:10.18429/JACoW-IPAC2014-TUPRI031
[n] F. V. Podgorny, “DESIGN OF LOAD ÔÇô KLYSTRON EQUIVALENT FOR JLC”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THCP06, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Asova et al., “Status of the Photo Injector Test Facility at DESY, Zeuthen Site (PITZ)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE010, pp. 2164-2166.
- M. Parro, F. Arranz, B. Brañas, D. Iglesias, and D. Rapisarda, “Recent Developments on the IFMIF/EVEDA Beam Dump Cooling Circuit”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS044, pp. 1632-1634.
- H. Dewa et al., “Photoelectron RF Gun Designed as a Single Cell Cavity”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF046, pp. 411-413.
- R. Leewe and K. Fong, “Simulation Analysis of Lorentz Force Induced Oscillations in RF Cavities in Vector Sum and Cw Operation”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1078-1081.
- J. Knobloch and H. Padamsee, “Microscopic Investigation of Field Emitters Located by Thermometry in 1.5 GHz Superconducting Niobium Cavities”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95B03, pp. 95-103.
- H. Hanaki, H. Dewa, S. Suzuki, K. Yanagida, T. Asaka, and T. Ohshima, “Evaluation of Beam Energy Fluctuations Caused by Phase Noises”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP093, pp. 273-275.
- T. Galek, K. Brackebusch, Sh. Gorgi Zadeh, and U. van Rienen, “Study of Higher Order Modes in Multi-Cell Cavities for BESSY-VSR Upgrade”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 412-414.
- Y. Z. Wu, “Beijing Tau-Charm Factory Design Study”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6B011, pp. 321-323.
- L. Hagge, S. Eucker, B. List, N. J. Walker, and N. Welle, “Organizing the ILC Technical Design Documentation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS055, pp. 1656-1658.
- S. D. R?ñdel et al., “Status and Future Perspective of the TRIUMF E-Linac”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 70-73.
- M. Ikegami et al., “Beam Loss Mitigation in J-PARC Linac after the Tohoku Earthquake”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB096, pp. 401-403.
- H. X. Deng et al., “Status of Non-destructive Bunch Length Measurement based on Coherent Cherenkov Radiation”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME049, pp. 583-585.
- V. Chohan et al., “Testing of the LHC Magnets in Cryogenic Conditions: Current Experience and Near Future Outlook”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT014, pp. 560-562.
- D. Kleinjan, “Arc and Convertor Current Transient Studies for Multi-cusp Cesiated Surface Conversion H? Source at Lansce”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1983-1985.
- H. Jin, Y. Choi, and S. Lee, “Progress and Plan of the Fast Protection System in the RAON Accelerator”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 296-298.
- I. A. Miloichikova, A. A. Bulavskaya, Yu. M. Cherepennikov, A. A. Grigorieva, and S. Stuchebrov, “Geant4 Based Numerical Model of Accelerator for Simulation of High Energy Therapeutic Electron Beam Parameters”, presented at the 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA38, unpublished.
- V. Kain et al., “Upgrades to the SPS-to-LHC Transfer Line Beam Stoppers for the LHC High-Luminosity Era”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1367-1370.
- A. Gonzalez, T. Maruta, P. Ostroumov, A. Plastun, K. Fukushima, and J. Wan, “Transverse beam dynamics studies in the FRIB accelerating cryomodules”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 618-621.
- M. Patil et al., “Status and upgrade of the visible light diagnostics port for energy spread measurements at KARA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL123, pp. 4764-4767.
- K. Hwang and J. Qiang, “FEL Simulation Using the Lie Method”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 240-245.
- M. G. Ibison et al., “Optical System Design for The ESS Proton Beam and Target Diagnostics”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 347-349.
- M. Sawamura et al., “Fabrication of Superconducting Spoke Cavity for Compact Photon Source”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 212-214.
- P. Stabile et al., “Beam Position Monitor Electronics Upgrade for Fermilab Switchyard”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUPF19, pp. 365-368.
- B. T. McCuistian et al., “Temporal Spot Size Evolution of the DARHT First Axis Radiographic Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC066, pp. 1206-1208.
- I. Arredondo and J. Jugo, “Containerized Control Structure for Accelerators”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 816-821.
- J. W. Amann et al., “Design of an 18 MW Beam Dump for 500 GeV Electron/Positron Beams at an ILC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE003, pp. 3341-3343.
- J. Peters, “Review of Negative Hydrogen Ion Sources High Brightness/High Current”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper FR1003, pp. 1031-1035.
- J. A. Uythoven et al., “Beam Induced Heating of the SPS Fast Pulsed Magnets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT035, pp. 623-625.
- V. Kain et al., “High Intensity Commissioning of the SPS LSS4 Extraction for CNGS”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN096, pp. 1604-1606.
- E. Jauregi et al., “High Current Switch-mode Power Converter Prototype for LHC Project 6kA, 8V”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT048, pp. 656-658.
- G. Franchetti, J. Struckmeier, K. Aulenbacher, and F. Zimmermann, “The Extreme Beams Initiative in EuCARD-2”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 483-485.
- S. Sapkota, D. Posthuma de Boer, and E. Yamakawa, “Development of a Faraday cup for the FETS-FFA”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 208-212.
- K. W. Shepard, P. N. Potukuchi, and A. Roy, “Niobium Coaxial Quarter-Wave Cavities”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-89, pp. 287-289.
- D. Ondreka, H. Liebermann, and B. R. Schlei, “Optimization of the SIS18 Injector Operation for FAIR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2088-2090.
- D. J. Crawford et al., “First Beam and High-Gradient Cryomodule Commissioning Results of the Advanced Superconducting Test Accelerator at Fermilab”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1831-1833.
- V. Zvyagintsev, R. E. Laxdal, Y. Ma, B. Matheson, B. S. Waraich, and Z. Y. Yao, “Coupler Design for RISP Spoke Cavity”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 372-374.
- E. Cano Vargas et al., “Timing Stability Comparison Study of RF Synthesis Techniques”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 325-327.
- F. Christie, J. R?Ânsch-Schulenburg, and M. Vogt, “A PolariX TDS for the FLASH2 Beamline”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 328-331.
- S. K. Patch, B. M. Brahim, and D. Santiago-Gonzalez, “Robust Thermoacoustic Range Verification for Pulsed Ion Beam Therapy”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 294-297.
- D. Sun, P. Datte, F. R. Huson, and W. W. MacKay, “RF Breakdown Test of SiO2 Coated Copper Electrodes”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 736-739.
- A. V. Shemchuk et al., “Magnetic Measurement System For The NICA Quadrupole Magnets”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 559-562.
- F. Hug et al., “Cryogenic Installations for Module Tests at Mainz”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 997-1002.
- F. Schlander, K. Aulenbacher, R. G. Heine, D. Simon, and T. Stengler, “1.3 GHz SRF Cryomodules for the Mainz Energy-recovering Superconducting Accelerator MESA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2853-2855.
- M. Fan, Z. Liptak, C. Wang, and Y. Wei, “Design of an online adjustable waveguide coupler for the TM020-mode cavity of proposed STCF”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB113, pp. 1944-1947.
- T. Saeki et al., “Study on Electro-Polishing Process by Niobium-Plate Sample With Artificial Pits”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO037, pp. 461-463.
- M. Labat, M. El Ajjouri, N. Hubert, D. Pedeau, M. Ribbens, and M.-A. Tordeux, “AXD Measurements at SOLEIL”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 209-212.
- R. K. Bhandari and A. S. Divatia, “Design Aspects of an External Injection System for VEC, Calcutta”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B41, pp. 165-168.
- D. M. Dykes et al., “The Economic Optimisation of the Main Parameters of the 3 GeV Electron Booster Synchrotron for DIAMOND”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP7B05, pp. 657-659.
- S. M. Polozov et al., “New Superconducting Linac Injector Project for Nuclotron-Nica: Current Results”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 627-629.
- D. H. Zhuang et al., “Improved Capacitive Coupling Type RF Power Couplers for a Cryomodule With Two 9-Cell Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB079, pp. 1313-1315.
- R. E. Pollock et al., “Infllection and Extraction Systems at the Indiana University Clyclotron Facility”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1094-1097.
- A. Plastun, T. Kanemura, and X. Wang, “Heavy ion implantation analysis in graphite for the FRIB charge selector”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 769-773.
- R. Pearsons, A. Harvey, E. Hubbard, M. Schulze, and S. Sheynin, “APT High Energy Linac Intertank Assembly Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA81, pp. 3579-3581.
- N. Hu, Z. H. Bai, W. Li, Q. Luo, and L. Wang, “Estimates of Collective Effects in the HALS Storage Ring Having the First Version Lattice”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3770-3773.
- B. Giaccone et al., “Plasma Processing to Reduce Field Emission in LCLS-II 1.3 GHz SRF Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1231-1238.
- A. M. Kolano, R. J. Barlow, A. Adelmann, and C. Baumgarten, “A Precise Beam Dynamics Model of the PSI Injector 2 to Estimate the Intensity Limit”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1630-1631.
- F. V. Podgorny, “DESIGN OF LOAD ÔÇô KLYSTRON EQUIVALENT FOR JLC”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THCP06, pp. XX-XX.
Back to search