Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Musardo, D. A. Harder, C. A. Kitegi, and T. Tanabe, “Magnetic Measurements of the NSLS-II Insertion Devices”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1693-1695. doi:10.18429/JACoW-IPAC2015-TUPJE037
[n] A. V. Philippov and A. Tuzikov, “Gold Ions Beam Losses at the Nuclotron Booster”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 441-443. doi:10.18429/JACoW-RUPAC2016-WEPSB036
[n] A. I. Fatkina, O. O. Iakushkin, and N. O. Tikhonov, “Application of GPGPUs and Multicore CPUs in Optimization of Some of the MpdRoot Codes”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 417-419. doi:10.18429/JACoW-RUPAC2016-WEPSB025
[n] R. A. Rimmer et al., “Development of a High-Power RF Cavity for the PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPQ06, pp. 1729-1731.
[n] M. K. Grecki, Z. Geng, S. Simrock, B. Aminov, and G. Ayvazyan, “LLRF System Requirement Engineering for the European XFEL”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP103, pp. 1033-1035.
[n] S. Esin, L. Kravchuk, V. Paramonov, and G. Romanov, “The Disk and Washer Structure for Moscow Meson Factory Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-53, pp. 657-659.
[n] P. Van Trappen et al., “SPS Beam Dump System (SBDS) Commissioning After Relocation and Upgrade”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2530-2532. doi:10.18429/JACoW-IPAC2022-THPOST039
[n] F. B. Kroes et al., “Improvement of the 400 kV Linac Electron Source of AmPS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1032-1035.
[n] A. V. Sy, Y. S. Derbenev, V. S. Morozov, A. Afanasev, Y. Bao, and R. P. Johnson, “Aberration Compensation in a Skew Parametric-Resonance Ionization Cooling Channel”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3221-3223. doi:10.18429/JACoW-IPAC2017-WEPIK116
[n] A. Galimberti et al., “Improvements on the Photon Beam Diagnostics at ELETTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI109, pp. 1891-1893.
[n] J. Stetson, S. Adam, M. Humbel, W. Joho, and Th. Stammbach, “The Commissioning of PSI Injector 2 for High Intensity, High Quality Beams”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-05, pp. 36-39.
[n] L. Picardi, C. Ronsivalle, and B. Spataro, “The First Module of the 3 GHz Side Coupled Drift Tube Linac SCDTL: Numerical Studies of RF Properties and Cold Tests Results”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B02, pp. 1999-2001.
[n] S. G. Arutunian and A. V. Margaryan, “Oscillating Wire as a ``Resonant Target'' for Beam Transversal Gradient Investigation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3412-3414. doi:10.18429/JACoW-IPAC2014-THPME076
[n] S. Ferry and E. Karantzoulis, “The FERMI@elettra Beam Dump”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP042, pp. 2887-2889.
[n] S. G. Arutunian et al., “PETRA Proton Beam Profiling by Vibrating Wire Scanner”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT016, pp. XX-XX.
[n] P.-A. Duperrex, P. Baumann, S. Joray, D. C. Kiselev, D. Laube, and D. Reggiani, “New Centering Beam Monitor for High Power Proton Beam Rotating Target”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 189-191. doi:10.18429/JACoW-CYCLOTRONS2019-TUP016
[n] B. S. Kyle, R. B. Appleby, J. K. Jones, P. H. Williams, M. J. de Loos, and S. B. van der Geer, “CSR and Space Charge Studies for the CLARA Phase 1 Beamline”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3851-3854. doi:10.18429/JACoW-IPAC2017-THPAB059
[n] E. Roussel et al., “Numerical Study of the Microbunching Instability at UVSOR-III: Influence of the Resistive and Inductive Impedances”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1656-1658. doi:10.18429/JACoW-IPAC2014-TUPRI042
For LaTeX
Use Complete Form
For BibTeX
References
- M. Musardo, D. A. Harder, C. A. Kitegi, and T. Tanabe, “Magnetic Measurements of the NSLS-II Insertion Devices”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1693-1695.
- A. V. Philippov and A. Tuzikov, “Gold Ions Beam Losses at the Nuclotron Booster”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 441-443.
- A. I. Fatkina, O. O. Iakushkin, and N. O. Tikhonov, “Application of GPGPUs and Multicore CPUs in Optimization of Some of the MpdRoot Codes”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 417-419.
- R. A. Rimmer et al., “Development of a High-Power RF Cavity for the PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPQ06, pp. 1729-1731.
- M. K. Grecki, Z. Geng, S. Simrock, B. Aminov, and G. Ayvazyan, “LLRF System Requirement Engineering for the European XFEL”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP103, pp. 1033-1035.
- S. Esin, L. Kravchuk, V. Paramonov, and G. Romanov, “The Disk and Washer Structure for Moscow Meson Factory Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-53, pp. 657-659.
- P. Van Trappen et al., “SPS Beam Dump System (SBDS) Commissioning After Relocation and Upgrade”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2530-2532.
- F. B. Kroes et al., “Improvement of the 400 kV Linac Electron Source of AmPS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1032-1035.
- A. V. Sy, Y. S. Derbenev, V. S. Morozov, A. Afanasev, Y. Bao, and R. P. Johnson, “Aberration Compensation in a Skew Parametric-Resonance Ionization Cooling Channel”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3221-3223.
- A. Galimberti et al., “Improvements on the Photon Beam Diagnostics at ELETTRA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI109, pp. 1891-1893.
- J. Stetson, S. Adam, M. Humbel, W. Joho, and Th. Stammbach, “The Commissioning of PSI Injector 2 for High Intensity, High Quality Beams”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-05, pp. 36-39.
- L. Picardi, C. Ronsivalle, and B. Spataro, “The First Module of the 3 GHz Side Coupled Drift Tube Linac SCDTL: Numerical Studies of RF Properties and Cold Tests Results”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B02, pp. 1999-2001.
- S. G. Arutunian and A. V. Margaryan, “Oscillating Wire as a ``Resonant Target'' for Beam Transversal Gradient Investigation”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3412-3414.
- S. Ferry and E. Karantzoulis, “The FERMI@elettra Beam Dump”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP042, pp. 2887-2889.
- S. G. Arutunian et al., “PETRA Proton Beam Profiling by Vibrating Wire Scanner”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT016, pp. XX-XX.
- P.-A. Duperrex, P. Baumann, S. Joray, D. C. Kiselev, D. Laube, and D. Reggiani, “New Centering Beam Monitor for High Power Proton Beam Rotating Target”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 189-191.
- B. S. Kyle, R. B. Appleby, J. K. Jones, P. H. Williams, M. J. de Loos, and S. B. van der Geer, “CSR and Space Charge Studies for the CLARA Phase 1 Beamline”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3851-3854.
- E. Roussel et al., “Numerical Study of the Microbunching Instability at UVSOR-III: Influence of the Resistive and Inductive Impedances”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1656-1658.
Back to search