Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. X. Zhang et al., “A BUMP SYSTEM FOR SSRF STORAGE RING”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEDM01, pp. XX-XX.
[n] P. J. Chou et al., “The Design Improvement of Transverse Stripline Kickers in TPS Storage Ring”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 213-216. doi:10.18429/JACoW-IBIC2017-TUPCF07
[n] M. Hassani, H. Afarideh, and Y. Ghorashinejad, “Development of Control System for 10 MeV Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 319-321. doi:10.18429/JACoW-Cyclotrons2016-THP07
[n] V. Balandin, W. Decking, N. Golubeva, and M. Scholz, “Straightness Correction of Ballistic Trajectories”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 101-103. doi:10.18429/JACoW-IPAC2019-MOPGW016
[n] S. Sabounchi, H. Afarideh, R. Solhju, F. Zakerhosseini, and M. Ghergherehchi, “Heat Transfer Studies of the IRANCYC-10 Magnet and its Effects on the Isochronous Magnetic Field”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 380-382. doi:10.18429/JACoW-Cyclotrons2016-THD02
[n] J. Fullerton, L. K. Jensen, and J. Spanggaard, “Software Renovation of CERN's Experimental Areas”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS034, pp. 409-411.
[n] C. H. Kuo, J. Chen, P. C. Chiu, K. T. Hsu, and K. H. Hu, “Preliminary Tune Feedback Study in the Taiwan Light Source”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD79, pp. 491-493.
[n] S. Bilgen, “Electron stimulated desorption using a Compton electron beam on PHIL facility”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR67, unpublished.
[n] B. Mahdian, H. Afarideh, R. Solhju, J.-S. Chai, and M. Ghergherehchi, “Conceptual Design of the 100 MeV Separated Sector Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPSH008, pp. 236-238.
[n] S. Bilgen, “DYVACS code: calculation of gas density profiles for dynamic conditions in FCCee accelerator.”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR68, unpublished.
[n] E. N. Shaposhnikova et al., “Loss of Landau Damping in the LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC057, pp. 211-213.
[n] R. Solhju, H. Afarideh, B. Mahdian, J.-S. Chai, and M. Ghergherehchi, “Improvement in Design of 10 MeV AVF Cyclotron Magnet”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPSH007, pp. 233-235.
[n] S. Sabounchi, H. Afarideh, R. Solhju, M. R. Asadi, J.-S. Chai, and M. Ghergherehchi, “Stress and Strain Analysis of the 10 MeV Cyclotron Magnet”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 71-73. doi:10.18429/JACoW-ICAP2015-WEP03
[n] S. Wang et al., “Development of Non-Evaporable Getter (NEG) Coatings on Small Diameter Vacuum Chambers for Diffraction-Limited Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4611-4613. doi:10.18429/JACoW-IPAC2018-THPMK125
[n] F. Jackson, “Collimation Optimisation in the Beam Delivery System of the International Linear Collider”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS074, pp. 721-723.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. X. Zhang et al., “A BUMP SYSTEM FOR SSRF STORAGE RING”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEDM01, pp. XX-XX.
- P. J. Chou et al., “The Design Improvement of Transverse Stripline Kickers in TPS Storage Ring”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 213-216.
- M. Hassani, H. Afarideh, and Y. Ghorashinejad, “Development of Control System for 10 MeV Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 319-321.
- V. Balandin, W. Decking, N. Golubeva, and M. Scholz, “Straightness Correction of Ballistic Trajectories”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 101-103.
- S. Sabounchi, H. Afarideh, R. Solhju, F. Zakerhosseini, and M. Ghergherehchi, “Heat Transfer Studies of the IRANCYC-10 Magnet and its Effects on the Isochronous Magnetic Field”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 380-382.
- J. Fullerton, L. K. Jensen, and J. Spanggaard, “Software Renovation of CERN's Experimental Areas”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS034, pp. 409-411.
- C. H. Kuo, J. Chen, P. C. Chiu, K. T. Hsu, and K. H. Hu, “Preliminary Tune Feedback Study in the Taiwan Light Source”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD79, pp. 491-493.
- S. Bilgen, “Electron stimulated desorption using a Compton electron beam on PHIL facility”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR67, unpublished.
- B. Mahdian, H. Afarideh, R. Solhju, J.-S. Chai, and M. Ghergherehchi, “Conceptual Design of the 100 MeV Separated Sector Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPSH008, pp. 236-238.
- S. Bilgen, “DYVACS code: calculation of gas density profiles for dynamic conditions in FCCee accelerator.”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR68, unpublished.
- E. N. Shaposhnikova et al., “Loss of Landau Damping in the LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC057, pp. 211-213.
- R. Solhju, H. Afarideh, B. Mahdian, J.-S. Chai, and M. Ghergherehchi, “Improvement in Design of 10 MeV AVF Cyclotron Magnet”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPSH007, pp. 233-235.
- S. Sabounchi, H. Afarideh, R. Solhju, M. R. Asadi, J.-S. Chai, and M. Ghergherehchi, “Stress and Strain Analysis of the 10 MeV Cyclotron Magnet”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 71-73.
- S. Wang et al., “Development of Non-Evaporable Getter (NEG) Coatings on Small Diameter Vacuum Chambers for Diffraction-Limited Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4611-4613.
- F. Jackson, “Collimation Optimisation in the Beam Delivery System of the International Linear Collider”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS074, pp. 721-723.
Back to search
