JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Hinkson, “Performance of Advanced Light Source Particle Beam Diagnostics”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2097-2100. 
[n]	G. Brajnik, S. Bassanese, G. Cautero, R. De Monte, M. Ferianis, and G. Rehm, “Reducing Current Dependence in Position Measurements of BPM Systems by Using Pilot Tone: Quasi-Constant Power Approach”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 301-303. doi:10.18429/JACoW-IBIC2017-TUPWC09
[n]	E. R. Harms et al., “Rebuild of Capture Cavity 1 at Fermilab”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP012, pp. 917-919. 
[n]	J. Dedic, D. Golob, A. Hasanovic, and M. Plesko, “Extremely Low-jitter FPGA Based Synchronization Timing System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN063, pp. 296-298. 
[n]	R. Klatt, R. D. Kohaupt, and T. Weiland, “Theoretical Prediction of Head-Tail Tune Shift in PETRA”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2356-2359. 
[n]	K. Hwang, C. E. Mitchell, and R. D. Ryne, “Chaos Indicators for Studying Dynamic Aperture in the IOTA Ring with Protons”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3301-3303. doi:10.18429/JACoW-IPAC2019-WEPTS078
[n]	P. Chitnis, T. G. Robertazzi, K. A. Brown, and C. Theisen, “Quantitative Fault Tree Analysis of the Beam Permit System Elements of Relativistic Heavy Ion Collider (RHIC) at BNL”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC076, pp. 269-272. 
[n]	J. D. Sethian, R. A. Mahaffey, R. A. Meger, and D. N. Spector, “Collective Ion Acceleration Produced by Injecting a Rotating Relavistic Electron Beam into Neutral Hydrogen”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4193-4196. 
[n]	T. Rizawa and R. Pendleton, “Broadband Coax-Waveguide Transitions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPR16, pp. 1824-1826. 
[n]	A. R. Donaldson, R. L. Cassel, T. S. Mattison, and L. L. Reginato, “Kicker Thyatron Experience from SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3165-3168. 
[n]	P. Baudrenghien, J. Galindo, G. Hagmann, J. Noirjean, D. Stellfeld, and D. Valuch, “Commissioning of the Linac4 Low Level RF and Future Plans”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP027, pp. 892-894. 
[n]	G. Mavrogenes, T. Khoe, and W. Wesolowski, “Space Charge Effects in High Current Linear Accelerator Transport Systems”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 478-481. 
[n]	N. S. Ginzburg et al., “Potentialities of ELMI Device for Submillimeter Generation by Stimulated Intercavity Scattering in Planar FEM”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper MOPPH063, pp. 156-159. 
[n]	S. Lederer et al., “Conditioning of a New Gun Cavity Towards 60 MV/m at PITZ”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN026, pp. 971-973. 
[n]	T. Fleck, R. B?ñr, and J. M. Mosthaf, “Status of the Control System for the Therapy Facility HIT”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP021, pp. 215-217. 
[n]	P. Piot, M. B. Andorf, G. Fagerberg, and M. Figora, “Development of Short Undulators for Electron-Beam-Radiation Interaction Studies”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 380-382. doi:10.18429/JACoW-NAPAC2016-TUPOA47
[n]	J. N. Corlett, W. C. Barry, J. M. Byrd, R. Schoenlein, and A. Zholents, “Synchronization of X-ray Pulses to the Pump Laser in an Ultrafast X-ray Facility”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI034, pp. 671-673. 
[n]	A. A. Efremov, A. I. Ivanenko, V. B. Kutner, J. Pivarc, and K. D. Tumanov, “Vacuum System for the DUBNA ECR-Ion Source DECRIS - 14”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1567-1570. 
[n]	Y. Cheng and K. Liu, “Low Cost Concepts to Reduce the Voltage Ripple of the DC Power Supply”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1262-1265. 
[n]	D. Kwak et al., “Design study of rebuncher system for KoBRA at RAON”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL001, unpublished. 
[n]	X. C. Meng et al., “Study of Beam Break Up in Irradiation Linacs”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3767-3769. doi:10.18429/JACoW-IPAC2017-THPAB031
[n]	V. M. Biryukov et al., “High Energy Beam Line Based on Bending Crystal”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR20, pp. 1948-1948. 
[n]	K. T. Hsu, K. H. Hu, C. H. Kuo, and G. J. Jan, “Diagnostic Instrumentation System for the SRRC 1.3 GeV Synchrotron Radiation Light Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2091-2094. 
[n]	C. Ronsivalle et al., “The TOP-IMPLART Linac: Machine Status and Experimental Activity”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4669-4672. doi:10.18429/JACoW-IPAC2017-THPVA090
[n]	G. J. Focker, S. Bart Pedersen, and E. Bravin, “The Renovation of the ISOLDE Instrumentation”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW003, pp. XX-XX. 
[n]	S. Morton et al., “NLCTA and the X-band Test​ Area at SLAC”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS063, unpublished. 
[n]	T. Aiazzi, D. Passarelli, L. Grassellino, and M. Parise, “Fabrication status of production SSR1 jacketed cavities for PIP-II at Fermilab”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 832-835. doi:10.18429/JACoW-LINAC2024-THPB100
[n]	S. Sakanaka, T. Higo, F. Hinode, K. Kubo, J. Urakawa, and T. Rizawa, “Low-Power Measurement on a HOM Damped Cavity for the ATF Damping Ring”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-87, pp. 281-283. 
[n]	V. Sidorov et al., “A Point-like Source of Extreme Ultraviolet Radiation Based on Non-equilibrium Discharge, Sustained by Powerful Radiation of Terahertz Gyrotron”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper THOMMH03, pp. 140-143. 
[n]	B. R. Park, J. Choi, H.-S. Kang, J.-W. Lee, and J. C. Yoon, “Development of Machine Interlock System HMI for PLS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH121, pp. 3086-3088. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search