Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. G. Beetham, G. Daems, J. H. Lewis, and B. Puccio, “A New VME Timing Module: TG8”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 360-363. doi:10.18429/JACoW-ICALEPCS1991-S10TS05
[n] D. A. Pepler et al., “The 10 Petawatt Upgrade Proposal For The Vulcan High-Power Laser”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP083, pp. 272-274.
[n] P. Forcket al., “”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. XX-XX. doi:10.18429/JACoW-IPAC2023-THPA002
[n] M. Xu et al., “Status of HIAF iLinac SC cavity system at IMP”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper FRXA005, unpublished.
[n] M. Carillo et al., “Beam dynamics optimization for high gradient beam driven plasma wakefield acceleration at SPARC-Lab”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3940-3943. doi:10.18429/JACoW-IPAC2023-THOGB1
[n] I. C. Sheng, S. Sharma, R. Rotela, and J. Howell, “Thermomechanical Analysis of a Compact-Design High Heat Load Crotch Absorber”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR08, pp. 816-818.
[n] T. Guillen Hernandez et al., “Numerical calculation of the Lorentz force detuning and the pressure sensitivity for the HL-LHC crab cavity”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3003-3005. doi:10.18429/JACoW-IPAC2023-WEPA149
[n] M. Stirbet et al., “Fundamental Power Coupler Development for The SNS Superconducting Linac Cavities”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH455, pp. 728-730.
[n] R. Kwiatkowski, R. Nietubyc, J. Szewi, A. I. Wawrzyniak, and D. R. Zaloga, “Beam Loss Monitor for Polish Free Electron Laser (PolFEL): Design and Tests”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 225-228. doi:10.18429/JACoW-IBIC2022-TUP04
[n] A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
[n] M. Schwickert, T. Fleck, and A. Reiter, “Monolithic DAQ System for Beam Diagnostics at the HIT Medical Accelerator Facility”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP005, pp. 177-179.
[n] O. Stringer et al., “Optimisation of a gas jet-based beam profile monitor for high intensity electron beams”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4576-4579. doi:10.18429/JACoW-IPAC2023-THPL065
[n] P. M. McIntyre, J. Breitschopf, J. Gerity, J. N. Kellams, and A. Sattarov, “Micro-aligned Solenoid for Magnetized Bunched-beam Electron Cooling of 100 GeV/u Ions”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4314-4317. doi:10.18429/JACoW-IPAC2019-THPTS087
[n] D. T. Ziemianski and M. P. Nowak, “Dynamic Analysis and Measurement of Ground Motion for the Solaris - National Synchrotron Radiation Centre in Cracow”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 24-25. doi:10.18429/JACoW-MEDSI2016-MOPE10
[n] T. Akagi et al., “Completion of Phase B+ beam commissioning of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 705-708. doi:10.18429/JACoW-LINAC2024-THPB036
[n] D. T. Ziemianski and M. P. Nowak, “Ground Motions Measurements for Synchrotron”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 15-16. doi:10.18429/JACoW-MEDSI2016-MOPE07
[n] O. Stringer et al., “Gas jet-based beam profile monitor for the electron beam test stand at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2225-2228. doi:10.18429/JACoW-IPAC2024-WEPG18
[n] C. Fernandez-Figueroa and G. Molinari, “New Diagnostic Devices to Monitor Extraction from LEAR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1094-1097.
[n] G. Torrisi et al., “Design and optimization of a C-band RF Pulse Compressor for a VHEE LINAC for FLASH Radiotherapy”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 465-467. doi:10.18429/JACoW-LINAC2024-TUPB069
[n] C. M. Thomas, D. C. Faircloth, and S. J. S. Jago, “Magnet Design for the ISIS Second Target Station Proton Beam Line”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT019, pp. 1652-1654.
[n] P. Jardin et al., “ECRISs at GANIL Today and Tomorrow”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper FRYA01, pp. 195-199.
[n] M. Niccolini, T. P. Gharsa, F. Vaga, N. Magnin, and C. Boucly, “Real-Time control system upgrade of the CERN Linac4 pre-chopper”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 558-563. doi:10.18429/JACoW-ICALEPCS2025-TUPD017
[n] G. Rehm, A. F. D. Morgan, and C. Thomas, “Beam Diagnostics Systems for the Diamond Synchrotron Light Source”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT127, pp. 2765-2767.
[n] N. Bunijevac and D. Monteiro, “Scheduler for cooling and ventilation plants: feedback on easy and low cost method for energy savings”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper WEPD110, unpublished.
[n] M. A. Furman and A. A. Zholents, “Incoherent Effects Driven by the Electron Cloud”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP130, pp. 1794-1796.
[n] V. E. Blinov, V. A. Lebedev, A. V. Matveev, V. A. Tayursky, and A. A. Zholents, “Synchrotron Radiation Masking on Asymmetric 6.5 x 4.3- GeV B-factory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2342-2345.
[n] W. A. Barletta, V. Variale, G. Bellomo, R. Parodi, G. Gemme, and V. Stagno, “Design Study for the ELFA Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 775-778.
[n] J. H. Han, I. Bohnet, M. Krasilnikov, F. Stephan Deutsches Elektronen-Synchrotron, and K. Fl?Âttmann Deutsches Elektronen-Synchrotron, “Dark Current Measurements at the PITZ Rf Gun”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT29, pp. XX-XX.
[n] F. Chautard et al., “GANIL Status Report”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT052, pp. 1270-1272.
[n] D. N. Shatilov and A. A. Zholents, “Lifetime and Tail Simulations for Beam-Beam Effects in PEP-II B Factory”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP05, pp. 2892-2894.
[n] I. J. Gillingham et al., “Diamond's transition from VME to fieldbus based distributed control”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THCOAA04, pp. 124-126.
[n] V. Talanov et al., “Neutron Doses Due to Beam Losses in a Novel Concept of a Proton Therapy Gantry”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4736-4739. doi:10.18429/JACoW-IPAC2017-THPVA123
[n] M. Mu??oz, D. Einfeld, and T. F. G??nzel, “Closed Orbit Correction and Beam Dynamics Issues at ALBA”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS054, pp. 3404-3406.
[n] G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
[n] K. Y. Ng and A. Bogacz, “Low-Dispersion γt Jump for the Main Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR17, pp. 3388-3390.
[n] Y. Jongen et al., “The Proton Therapy System for MGH's NPTC: Equipment Description and Progress Report”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper L-03, pp. 606-609.
[n] J. G. Hwang and T. K. Yang, “Development of Large Aperture Faraday-Cup for LEBT of KHIMA.”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 241-243. doi:10.18429/JACoW-IPAC2016-MOPMR009
[n] P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
[n] A. J. Rose, A. I. Bell, M. T. Heron, and S. C. Lay, “Permanent Magnet Insertion Device Control Systems on Diamond”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP004, pp. 174-176.
[n] J. Marroncle, P. Abbon, E. Delagnes, F. Jeanneau, J.-Ph. Mols, and J. Pancin, “Beam Transverse Profile Monitor Prototype for IFMIF-EVEDA Accelerator”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF064, pp. 268-269.
[n] R. Kwiatkowski, P. Czuma, K. Namyslak, G. Strzelecki, A. Andrejczuk, and K. Szymanski, “Design and Development of Inverse Compton Scattering Hard X-Ray Source Based on Linear Accelerator of Polish Free Electron Laser (PolFEL)”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM115, unpublished.
[n] C. S. Gallo, A. Galat?â, D. Mascali, and G. Torrisi, “A Possible Optimization of Electron Cyclotron Resonance Ion Sources Plasma Chambers”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 67-70. doi:10.18429/JACoW-ECRIS2018-TUB3
For LaTeX
Use Complete Form
For BibTeX
References
- C. G. Beetham, G. Daems, J. H. Lewis, and B. Puccio, “A New VME Timing Module: TG8”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S10TS05, pp. 360-363.
- D. A. Pepler et al., “The 10 Petawatt Upgrade Proposal For The Vulcan High-Power Laser”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP083, pp. 272-274.
- P. Forcket al., “”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, pp. XX-XX.
- M. Xu et al., “Status of HIAF iLinac SC cavity system at IMP”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper FRXA005, unpublished.
- M. Carillo et al., “Beam dynamics optimization for high gradient beam driven plasma wakefield acceleration at SPARC-Lab”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THOGB1, pp. 3940-3943.
- I. C. Sheng, S. Sharma, R. Rotela, and J. Howell, “Thermomechanical Analysis of a Compact-Design High Heat Load Crotch Absorber”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR08, pp. 816-818.
- T. Guillen Hernandez et al., “Numerical calculation of the Lorentz force detuning and the pressure sensitivity for the HL-LHC crab cavity”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA149, pp. 3003-3005.
- M. Stirbet et al., “Fundamental Power Coupler Development for The SNS Superconducting Linac Cavities”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH455, pp. 728-730.
- R. Kwiatkowski, R. Nietubyc, J. Szewi, A. I. Wawrzyniak, and D. R. Zaloga, “Beam Loss Monitor for Polish Free Electron Laser (PolFEL): Design and Tests”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 225-228.
- A. Ageyev et al., “STARTING-UP AND ADJUSTMENT WORKS ON CRYOGENIC AND VACUUM SYSTEM OF THE SUPERCONDUCTING RADIO-FREQUENCY SEPARATOR”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WECAU01, pp. XX-XX.
- M. Schwickert, T. Fleck, and A. Reiter, “Monolithic DAQ System for Beam Diagnostics at the HIT Medical Accelerator Facility”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP005, pp. 177-179.
- O. Stringer et al., “Optimisation of a gas jet-based beam profile monitor for high intensity electron beams”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL065, pp. 4576-4579.
- P. M. McIntyre, J. Breitschopf, J. Gerity, J. N. Kellams, and A. Sattarov, “Micro-aligned Solenoid for Magnetized Bunched-beam Electron Cooling of 100 GeV/u Ions”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4314-4317.
- D. T. Ziemianski and M. P. Nowak, “Dynamic Analysis and Measurement of Ground Motion for the Solaris - National Synchrotron Radiation Centre in Cracow”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 24-25.
- T. Akagi et al., “Completion of Phase B+ beam commissioning of Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 705-708.
- D. T. Ziemianski and M. P. Nowak, “Ground Motions Measurements for Synchrotron”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 15-16.
- O. Stringer et al., “Gas jet-based beam profile monitor for the electron beam test stand at CERN”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG18, pp. 2225-2228.
- C. Fernandez-Figueroa and G. Molinari, “New Diagnostic Devices to Monitor Extraction from LEAR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1094-1097.
- G. Torrisi et al., “Design and optimization of a C-band RF Pulse Compressor for a VHEE LINAC for FLASH Radiotherapy”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 465-467.
- C. M. Thomas, D. C. Faircloth, and S. J. S. Jago, “Magnet Design for the ISIS Second Target Station Proton Beam Line”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT019, pp. 1652-1654.
- P. Jardin et al., “ECRISs at GANIL Today and Tomorrow”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper FRYA01, pp. 195-199.
- M. Niccolini, T. P. Gharsa, F. Vaga, N. Magnin, and C. Boucly, “Real-Time control system upgrade of the CERN Linac4 pre-chopper”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 558-563.
- G. Rehm, A. F. D. Morgan, and C. Thomas, “Beam Diagnostics Systems for the Diamond Synchrotron Light Source”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT127, pp. 2765-2767.
- N. Bunijevac and D. Monteiro, “Scheduler for cooling and ventilation plants: feedback on easy and low cost method for energy savings”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper WEPD110, unpublished.
- M. A. Furman and A. A. Zholents, “Incoherent Effects Driven by the Electron Cloud”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP130, pp. 1794-1796.
- V. E. Blinov, V. A. Lebedev, A. V. Matveev, V. A. Tayursky, and A. A. Zholents, “Synchrotron Radiation Masking on Asymmetric 6.5 x 4.3- GeV B-factory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2342-2345.
- W. A. Barletta, V. Variale, G. Bellomo, R. Parodi, G. Gemme, and V. Stagno, “Design Study for the ELFA Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 775-778.
- J. H. Han, I. Bohnet, M. Krasilnikov, F. Stephan Deutsches Elektronen-Synchrotron, and K. Fl?Âttmann Deutsches Elektronen-Synchrotron, “Dark Current Measurements at the PITZ Rf Gun”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT29, pp. XX-XX.
- F. Chautard et al., “GANIL Status Report”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT052, pp. 1270-1272.
- D. N. Shatilov and A. A. Zholents, “Lifetime and Tail Simulations for Beam-Beam Effects in PEP-II B Factory”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP05, pp. 2892-2894.
- I. J. Gillingham et al., “Diamond's transition from VME to fieldbus based distributed control”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THCOAA04, pp. 124-126.
- V. Talanov et al., “Neutron Doses Due to Beam Losses in a Novel Concept of a Proton Therapy Gantry”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4736-4739.
- M. Mu??oz, D. Einfeld, and T. F. G??nzel, “Closed Orbit Correction and Beam Dynamics Issues at ALBA”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS054, pp. 3404-3406.
- G. Suberlucq, “Technological Challenges for High Brightness Photo-injectors”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUYBCH02, pp. 64-68.
- K. Y. Ng and A. Bogacz, “Low-Dispersion γt Jump for the Main Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR17, pp. 3388-3390.
- Y. Jongen et al., “The Proton Therapy System for MGH's NPTC: Equipment Description and Progress Report”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper L-03, pp. 606-609.
- J. G. Hwang and T. K. Yang, “Development of Large Aperture Faraday-Cup for LEBT of KHIMA.”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 241-243.
- P. Zhang, G. J. Rosaz, A. Sublet, M. Therasse, and W. Venturini Delsolaro, “The Influence of Cooldown Conditions at Transition Temperature on the Quality Factor of Niobium Sputtered Quarter-Wave Resonators for HIE-ISOLDE”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB077, pp. 765-769.
- A. J. Rose, A. I. Bell, M. T. Heron, and S. C. Lay, “Permanent Magnet Insertion Device Control Systems on Diamond”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP004, pp. 174-176.
- J. Marroncle, P. Abbon, E. Delagnes, F. Jeanneau, J.-Ph. Mols, and J. Pancin, “Beam Transverse Profile Monitor Prototype for IFMIF-EVEDA Accelerator”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF064, pp. 268-269.
- R. Kwiatkowski, P. Czuma, K. Namyslak, G. Strzelecki, A. Andrejczuk, and K. Szymanski, “Design and Development of Inverse Compton Scattering Hard X-Ray Source Based on Linear Accelerator of Polish Free Electron Laser (PolFEL)”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM115, unpublished.
- C. S. Gallo, A. Galat?â, D. Mascali, and G. Torrisi, “A Possible Optimization of Electron Cyclotron Resonance Ion Sources Plasma Chambers”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 67-70.
Back to search