Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. H. Gillespie, B. W. Hill, and G. H. Gillespie Associates, “Graphical User Interface for TRACE 3-D Incorporating Some Expert System Type Features”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-63, pp. 787-789.
[n] J. E. Spencer, R. J. England, C.-K. Ng, R. J. Noble, Z. Wu, and D. Xu, “Coupler Studies for PBG Fiber Accelerators”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP136, pp. 346-348.
[n] N. N. Alexeev et al., “EXPERIMENTS WITH CARBON IONS ACCUMULATION IN THE ITEP-TWAC STORAGE RING”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUCO02, pp. XX-XX.
[n] J. J. Murray, K. L. Brown, and T. Fieguth, “The Completed Design of the SLC Final Focus System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1331-1334.
[n] J. F. Wagner et al., “Status of Injection Studies into the Figure-8 Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 187-189. doi:10.18429/JACoW-IPAC2015-MOPWA036
[n] M. Droba et al., “Simulation Studies on Beam Injection into a Figure-8 Type Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1126-1128. doi:10.18429/JACoW-IPAC2014-TUPRO045
[n] Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
[n] P. E. Evtushenko, F. E. Hannon, and B. Wustmann, “Design of Strip-Line BPM for Large Thermal Stress Conditions”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC30, pp. 442-442.
[n] J. L. Orthel and G. H. Gillespie Associates, “Effects of Surface and Volume Production on Emittance in a Volume-Type Negative Ion Source”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-16, pp. 648-650.
[n] F. Herlach, T. Erber, R. Gearhart, R. McBroom, and J. Murray, “Experiments with Magagauss Targets at SLAC”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 809-814.
[n] E. Desmond, J. Galayda, W. Louie, B. Martin, and R. Rose, “Control System of the Superconducting X-Ray Lithography (SXLS) at Brookhaven”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1374-1377.
[n] E. R. Colby, R. J. England, and R. J. Noble, “A Laser-Driven Linear Collider: Sample Machine Parameters and Configuration”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP087, pp. 262-264.
[n] E. G. Michaelis, “Status of the CERN Synchrocyclotron Improvement Program and Plans for Physics Facilities (Invited paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 141-166.
[n] A. Brinkmann and J. Ziegler, “Dry-Ice Cleaning of RF-Structures at DESY”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 52-55. doi:10.18429/JACoW-LINAC2016-MOOP05
[n] M. Thomas, R. Biscardi, R. D, J. Keane, P. Mortazavi, and J. Rose, “SXLS RF Cavity and System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 804-807.
[n] P. Duval, M. Lomperski, and J. Bobnar, “TINE Studio, Making Life Easy for Administrators, Operators and Developers”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1017-1020. doi:10.18429/JACoW-ICALEPCS2015-WEPGF133
[n] Y. Alexahin and D. J. Summers, “Rapid-cycling Synchrotron with Variable Momentum Compaction”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE085, pp. 1182-1184.
[n] R. Biscardi et al., “Progress on Bunch Lengthening at the NSLS VUV Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1326-1329.
[n] E. G. Michaelis, “Review of Meson Factories”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1385-1397.
[n] P. Duval, H. Wu, and J. Bobnar, “Common Device Interface 2.0”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO207, pp. 144-146.
[n] D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, and A. Y. Orlov, “Test of a Silicon Photomultiplier for Ionization Profile Monitor Applications”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPB14, pp. 90-92.
[n] M. Giovannozzi et al., “Dynamic Aperture Performance for Different Collision Optics Scenarios for the LHC Luminosity Upgrade”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA047, pp. 2609-2611.
[n] M. Ferianis, “The ELETTRA Streak Camera: System Set-Up and First Results”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT07, pp. XX-XX.
[n] P. E. Faugeras, H. Beger, H. P. Kindermann, V. Roedel, G. Rogner, and A. Warman, “The New RF System for Lepton Acceleration in the CERN SPS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1719-1722.
[n] W. Fang, L. Wang, and Z. T. Zhao, “Design Study of 3.6-cell C-band Photocathode Electron Gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2121-2123. doi:10.18429/JACoW-IPAC2019-TUPTS085
[n] M. D. Balcazar et al., “Tunable Q-Factor Gas-Filled RF Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2064-2066. doi:10.18429/JACoW-IPAC2018-WEPAG002
[n] R. Laouar, E. R. Colby, R. J. England, and R. J. Noble, “Measurement of Thermal Dependencies of PBG Fiber Properties”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP276, pp. 1343-1345.
[n] G. H. Gillespie, B. W. Hill, and J. M. Moore, “Solving Complex Beamline Fitting and Optimization Problems with the Particle Beam Optics Lab PBO LabTM”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A10, pp. 1375-1377.
[n] D. A. Liakin, S. V. Barabin, T. Kulevoy, A. Y. Orlov, and M. S. Saratovskikh, “Some Development Aspects of Control and Diagnostic Systems for Fourth-Generation Russian Synchrotron Radiation Source”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 450-452. doi:10.18429/JACoW-RUPAC2018-THPSC20
[n] J. Han, O. R. Choi, J.-W. Kim, and C. K. Hwang, “Design of the RF System for the Accelerator Complex of Rare Isotope Science Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI041, pp. 2794-2796.
[n] I. N. Meshkov et al., “The Computer Simulation of the Particle Dynamics in the Storage Ring with Strong Coupling of Transverse Modes”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1A17, pp. 1408-1410.
[n] G. H. Gillespie and B. W. Hill, “Table of Contents - xxviii New Graphic User Interface for the Charged Particle Beam Program PARMILA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB14, pp. 2300-2302.
[n] S. L. Kramer, R. Biscardi, and G. Ramirez, “Bunch Length Control in the VUV Light Source”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1874-1877.
[n] Y. Torun and A. Moretti, “Grid Window Tests on an 805-MHz Pillbox Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3393-3394. doi:10.18429/JACoW-IPAC2015-WEPTY054
[n] M. Putignano, K.-U. K??hnel, and C. P. Welsch, “Design of a Nozzle-Skimmer System for a Low Perturbation Ionization Beam Profile Monitor”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB08, pp. 179-181.
[n] T. Fieguth et al., “Tuning the Arcs of the SLAC Linear Collider”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 272-275.
[n] A. Y. Orlov, P. N. Alekseev, S. V. Barabin, and D. A. Liakin, “Universal Timer Module for the Timing System of the Accelerating-Storage Complex ITEP-TWAC”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB042, pp. 269-271.
[n] H. Niebuhr, A. Ates, M. Droba, O. Meusel, and U. Ratzinger, “Figure-8 Storage Ring - Ion Beam Injection into a Closed, Magnetic System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 680-682. doi:10.18429/JACoW-IPAC2017-MOPIK067
[n] Y. G??mez Mart?¡nez et al., “Last Spiral 2 Couplers Preparation and RF Conditioning”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP054, pp. 1036-1039.
[n] H. Beger, R. Cusack, A. Fiebig, and H. Schroot, “The Data Acquisition System (DAS) for the Improved CERN SC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper H-05, pp. 549-552.
[n] D. A. Liakin, S. V. Barabin, and A. Y. Orlov, “Digital Signal Processing Algorithms for Linac Low-Level RF Systems”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC33, pp. 392-394.
[n] B. W. Hill, H. B. Knowles, and J. L. Orthel, “Shielding and Activation Study for Proton Medical Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1762-1765.
[n] H. Niebuhr et al., “Figure-8 Storage Ring ÔÇô Investigation of the Scaled Down Injection System”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 41-45. doi:10.18429/JACoW-HB2016-MOPR001
[n] H. Hähnel, A. Ates, B. Dedic, C. Wagner, J. Kaiser, and U. Ratzinger, “RF conditioning of an IH-DTL cavity made using additive manufacturing”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3501-3504. doi:10.18429/JACoW-IPAC2024-THPR10
[n] S. V. Barabin, P. Forck, T. Giacomini, D. A. Liakin, and A. Y. Orlov, “Testing the Silicon Photomultiplier for Ionization Profile Monitor”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH071, pp. 1172-1174.
[n] J.-M. De Conto et al., “GENEPI-3C, a Versatile Neutron Generator for the GUINEVERE ADS Feasibility Studies”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP028, pp. 1348-1350.
For LaTeX
Use Complete Form
For BibTeX
References
- G. H. Gillespie, B. W. Hill, and G. H. Gillespie Associates, “Graphical User Interface for TRACE 3-D Incorporating Some Expert System Type Features”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-63, pp. 787-789.
- J. E. Spencer, R. J. England, C.-K. Ng, R. J. Noble, Z. Wu, and D. Xu, “Coupler Studies for PBG Fiber Accelerators”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP136, pp. 346-348.
- N. N. Alexeev et al., “EXPERIMENTS WITH CARBON IONS ACCUMULATION IN THE ITEP-TWAC STORAGE RING”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUCO02, pp. XX-XX.
- J. J. Murray, K. L. Brown, and T. Fieguth, “The Completed Design of the SLC Final Focus System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1331-1334.
- J. F. Wagner et al., “Status of Injection Studies into the Figure-8 Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 187-189.
- M. Droba et al., “Simulation Studies on Beam Injection into a Figure-8 Type Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1126-1128.
- Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
- P. E. Evtushenko, F. E. Hannon, and B. Wustmann, “Design of Strip-Line BPM for Large Thermal Stress Conditions”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC30, pp. 442-442.
- J. L. Orthel and G. H. Gillespie Associates, “Effects of Surface and Volume Production on Emittance in a Volume-Type Negative Ion Source”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-16, pp. 648-650.
- F. Herlach, T. Erber, R. Gearhart, R. McBroom, and J. Murray, “Experiments with Magagauss Targets at SLAC”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 809-814.
- E. Desmond, J. Galayda, W. Louie, B. Martin, and R. Rose, “Control System of the Superconducting X-Ray Lithography (SXLS) at Brookhaven”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1374-1377.
- E. R. Colby, R. J. England, and R. J. Noble, “A Laser-Driven Linear Collider: Sample Machine Parameters and Configuration”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP087, pp. 262-264.
- E. G. Michaelis, “Status of the CERN Synchrocyclotron Improvement Program and Plans for Physics Facilities (Invited paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 141-166.
- A. Brinkmann and J. Ziegler, “Dry-Ice Cleaning of RF-Structures at DESY”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 52-55.
- M. Thomas, R. Biscardi, R. D, J. Keane, P. Mortazavi, and J. Rose, “SXLS RF Cavity and System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 804-807.
- P. Duval, M. Lomperski, and J. Bobnar, “TINE Studio, Making Life Easy for Administrators, Operators and Developers”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1017-1020.
- Y. Alexahin and D. J. Summers, “Rapid-cycling Synchrotron with Variable Momentum Compaction”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE085, pp. 1182-1184.
- R. Biscardi et al., “Progress on Bunch Lengthening at the NSLS VUV Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1326-1329.
- E. G. Michaelis, “Review of Meson Factories”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1385-1397.
- P. Duval, H. Wu, and J. Bobnar, “Common Device Interface 2.0”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper TCO207, pp. 144-146.
- D. A. Liakin, S. V. Barabin, P. Forck, T. Giacomini, and A. Y. Orlov, “Test of a Silicon Photomultiplier for Ionization Profile Monitor Applications”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPB14, pp. 90-92.
- M. Giovannozzi et al., “Dynamic Aperture Performance for Different Collision Optics Scenarios for the LHC Luminosity Upgrade”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA047, pp. 2609-2611.
- M. Ferianis, “The ELETTRA Streak Camera: System Set-Up and First Results”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT07, pp. XX-XX.
- P. E. Faugeras, H. Beger, H. P. Kindermann, V. Roedel, G. Rogner, and A. Warman, “The New RF System for Lepton Acceleration in the CERN SPS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1719-1722.
- W. Fang, L. Wang, and Z. T. Zhao, “Design Study of 3.6-cell C-band Photocathode Electron Gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2121-2123.
- M. D. Balcazar et al., “Tunable Q-Factor Gas-Filled RF Cavity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2064-2066.
- R. Laouar, E. R. Colby, R. J. England, and R. J. Noble, “Measurement of Thermal Dependencies of PBG Fiber Properties”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP276, pp. 1343-1345.
- G. H. Gillespie, B. W. Hill, and J. M. Moore, “Solving Complex Beamline Fitting and Optimization Problems with the Particle Beam Optics Lab PBO LabTM”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6A10, pp. 1375-1377.
- D. A. Liakin, S. V. Barabin, T. Kulevoy, A. Y. Orlov, and M. S. Saratovskikh, “Some Development Aspects of Control and Diagnostic Systems for Fourth-Generation Russian Synchrotron Radiation Source”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 450-452.
- J. Han, O. R. Choi, J.-W. Kim, and C. K. Hwang, “Design of the RF System for the Accelerator Complex of Rare Isotope Science Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI041, pp. 2794-2796.
- I. N. Meshkov et al., “The Computer Simulation of the Particle Dynamics in the Storage Ring with Strong Coupling of Transverse Modes”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1A17, pp. 1408-1410.
- G. H. Gillespie and B. W. Hill, “Table of Contents - xxviii New Graphic User Interface for the Charged Particle Beam Program PARMILA”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB14, pp. 2300-2302.
- S. L. Kramer, R. Biscardi, and G. Ramirez, “Bunch Length Control in the VUV Light Source”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1874-1877.
- Y. Torun and A. Moretti, “Grid Window Tests on an 805-MHz Pillbox Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3393-3394.
- M. Putignano, K.-U. K??hnel, and C. P. Welsch, “Design of a Nozzle-Skimmer System for a Low Perturbation Ionization Beam Profile Monitor”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB08, pp. 179-181.
- T. Fieguth et al., “Tuning the Arcs of the SLAC Linear Collider”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 272-275.
- A. Y. Orlov, P. N. Alekseev, S. V. Barabin, and D. A. Liakin, “Universal Timer Module for the Timing System of the Accelerating-Storage Complex ITEP-TWAC”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB042, pp. 269-271.
- H. Niebuhr, A. Ates, M. Droba, O. Meusel, and U. Ratzinger, “Figure-8 Storage Ring - Ion Beam Injection into a Closed, Magnetic System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 680-682.
- Y. G??mez Mart?¡nez et al., “Last Spiral 2 Couplers Preparation and RF Conditioning”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP054, pp. 1036-1039.
- H. Beger, R. Cusack, A. Fiebig, and H. Schroot, “The Data Acquisition System (DAS) for the Improved CERN SC”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper H-05, pp. 549-552.
- D. A. Liakin, S. V. Barabin, and A. Y. Orlov, “Digital Signal Processing Algorithms for Linac Low-Level RF Systems”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC33, pp. 392-394.
- B. W. Hill, H. B. Knowles, and J. L. Orthel, “Shielding and Activation Study for Proton Medical Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1762-1765.
- H. Niebuhr et al., “Figure-8 Storage Ring ÔÇô Investigation of the Scaled Down Injection System”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 41-45.
- H. Hähnel, A. Ates, B. Dedic, C. Wagner, J. Kaiser, and U. Ratzinger, “RF conditioning of an IH-DTL cavity made using additive manufacturing”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR10, pp. 3501-3504.
- S. V. Barabin, P. Forck, T. Giacomini, D. A. Liakin, and A. Y. Orlov, “Testing the Silicon Photomultiplier for Ionization Profile Monitor”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH071, pp. 1172-1174.
- J.-M. De Conto et al., “GENEPI-3C, a Versatile Neutron Generator for the GUINEVERE ADS Feasibility Studies”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP028, pp. 1348-1350.
Back to search