Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. Schlott, M. Dach, Ch. David, B. Kalantari, M. Pedrozzi, and A. Streun, “Using Visible Synchrotron Radiation at the SLS Diagnostics Beamline”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT025, pp. 2526-2528.
[n] R. Macek, M. Plum, R. Hutson, D. Fitzgerald, S. Frankle, and C. Wilkinson, “Stripper-Foil Scan Studies of the First-Turn Beam Loss Mechanism in the LAMPF Proton Storage Ring (PSR)”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 366-369.
[n] B. K. Stillwell et al., “Research and Development on the Storage Ring Vacuum System for the APS Upgrade Project”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 92-95. doi:10.18429/JACoW-NAPAC2016-MOPOB11
[n] X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 165-168. doi:10.18429/JACoW-MEDSI2016-TUPE06
[n] M. Farkhondeh et al., “Status of the MIT-Bates South Hall Ring Commissioning”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2054-2057.
[n] A. M. Vetter, T. L. Buller, D. H. Dowell, and P. E. Johnson, “First Operation of the HAP/MOPA Traveling Wave Structure at Boeing FEL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P035, pp. 2950-2952.
[n] T. Mottershead et al., “Design and Operation of a Proton Microscope for Radiography at 800 MeV”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAA004, pp. 702-704.
[n] H. D. Glass et al., “Permanent Gradient Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P014, pp. 3263-3265.
[n] B. X. Yang, S. H. Lee, J. W. Morgan, and H. Shang, “High-Energy X-Ray Pinhole Camera for High-Resolution Electron Beam Size Measurements”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 504-507. doi:10.18429/JACoW-IBIC2016-TUPG66
[n] M. Chanel, J. Hansen, J.-M. Laurent, N. Madsen, and E. Mahner, “Experimental Investigation of Impact-Induced Molecular Desorption by 4.2 MeV/u Pb Ions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH036, pp. 2165-2167.
[n] B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4336-4339. doi:10.18429/JACoW-IPAC2021-THPAB270
[n] M. Dach, T. Korhonen, and T. Pal, “Interfacing CANbus to EPICS at the Swiss Light Source”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP569, pp. XX-XX.
[n] C. S. Hwang, C. H. Chang, T. C. Fan, G. J. Hwang, F. U. Lin, and P. K. Tseng, “Results Analysis of Measurement of the Multipole Magnet with Hall Probe”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1244-1247.
[n] M. Slater, W. Miller, and W. Slater, “Developing a Clinical Proton Accelerator Facility: Consortium-Assisted Technology Transfer”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 532-537.
[n] V. I. Shvedunov, A. I. Karev, V. N. Melekhin, N. P. Sobenin, and W. P. Trower, “Improved Mobile 70 MeV Race-Track Microtron Design”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR05, pp. 807-809.
[n] C. Chianelli, A. Curtoni, A. Zeitoun-Fakiris, J. Jodet, and I. Regardin, “Microscopic Analysis of Niobium Field Electron Emitters”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F09, pp. XX-XX.
[n] C. C. Hall, D. L. Bruhwiler, N. M. Cook, J. P. Edelen, and S. D. Webb, “Simulation of Perturbative Effects in IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3422-3424. doi:10.18429/JACoW-IPAC2018-THPAK082
[n] G. O. Bolme et al., “Commissioning of the First Drift Tube Linac Module in the Ground Test Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1669-1672.
[n] M. Krishnan et al., “Energetic Condensation Growth of MgB2 Thin-Films for SRF Applications”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO068, pp. 391-395.
[n] M. M. Kirk, D. Ondreka, and P. J. Spiller, “SIS-18 RF Knock-Out Optimization Studies”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI007, pp. 297-299.
[n] S. Baird et al., “Oxygen Ions in LEAR”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 580-583.
[n] A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172.
[n] A. C. Paul et al., “DARHT-II Energy Analyzer”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB055, pp. 2533-2535.
[n] T. T. Arkan et al., “LCLS-II Cryomodules Production Experience and Lessons Learned at Fermilab”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 709-714. doi:10.18429/JACoW-SRF2019-TUP101
[n] T. Giacomini, P. Forck, V. Skachkov, A. Gobulev, D. A. Liakin, and A. Vetrov, “Development of a Permanent Magnet Residual Gas Profile Monitor With Fast Readout”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PM17, pp. XX-XX.
[n] B. Dhital, D. Sagan, E. Hamwi, G. Hoffstaetter, K. Brown, and W. Lin, “Bmad based particle tracking simulation for slow resonant extraction”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1164-1167. doi:10.18429/JACoW-IPAC2024-TUPC69
[n] F. Varela, F. B. Bernard, M. Gonzalez-Berges, H. Milcent, and L. B. Petrova, “Monitoring Control Applications at CERN”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU033, pp. 1141-1144.
[n] M. Yoon, J. Choi, G. H. Kim, and T. Lee, “Closed Orbit Distortion and Correction of the PLS 2 GeV Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 646-649.
[n] J. Nash et al., “Precision Measurements of the SLC Beam Energy”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1550-1553.
[n] B. Krietenstein, K. Ko, T. Lee, U. Becker, T. Weiland, and M. Dohlus, “Spurious Oscillations in High Power Klystrons”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ06, pp. 1533-1535.
[n] J. F. O et al., “PSR Electron Cloud Detector and Suppressor Mechanical Design and Fabrication”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS054, pp. 4117-4119.
[n] F. Varela, U. Epting, M. Gonzalez Corral, E. Mandilara, and S. Podgorski, “MARS: Easing Maintenance and Interventions for CERN Controls”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1748-1752. doi:10.18429/JACoW-ICALEPCS2017-THPHA151
[n] B. Groussin, M. Martinez-Calderon, E. Granados, and B. Marsh, “Simulation of plasmonic effects in nanostructured copper surfaces for field-assisted photoemission”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1354-1357. doi:10.18429/JACoW-IPAC2023-TUPA002
[n] R. M. Franks, O. Alford, and L. R. Bertolini, “"Paper-Less" CAD/CAM for Accelerator Components”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH104, pp. 1450-1452.
[n] V. Karpenko, P. A. Seidl, R. M. Franks, and S. M. Lund, “An Engineering Overview of an Electrostatic Quadrupole Lattice for a High Current Transport Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH103, pp. 1447-1449.
[n] A. Chen et al., “Automation of sample alignment for neutron beamlines”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS070, unpublished.
[n] S. Peggs et al., “Optics for Strong Hadron Cooling in EIC HSR-IR2”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1920-1923. doi:10.18429/JACoW-IPAC2022-WEPOPT035
[n] N. Neveu, B. Jacobson, J. Sikora, and J. Diaz Cruz, “Higher order mode detection as a beam offset monitor for LCLS-II”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEBN2, unpublished.
[n] S. J. Cooke et al., “An Advanced Electromagnetic Eigenmode Solver for Vacuum Electronics Devices - CTLSS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL3, pp. 360-362.
[n] J. W. Staples et al., “The Fabrication and Initial Testing of the SNS RFQ”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH108, pp. 3930-3932.
[n] B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
[n] D. K. Olsen et al., “Recent Developments at the Holifield Heavy Ion Research Facility”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 452-455.
[n] E. Bouquerel et al., “Design of a Beamline from CYRC?® for Radiobiological Experiments”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 359-362. doi:10.18429/JACoW-Cyclotrons2016-THP24
[n] J. Beebe-Wang, N. L. D, A. U. Luccio, and S. Machida, “Space Charge Simulation Methods Incorporated in some Multi-Particle Tracking Codes and their Results Comparison”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE059, pp. 1329-1331.
[n] Y. Jongen et al., “New Features in the Design of the IBA-SHI Proton Therapy Facility”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2610-2613.
[n] M. A. Green et al., “Progress on the MICE Liquid Absorber Cooling and Cryogenic Distribution System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPP018, pp. 1601-1603.
[n] J. Bojowald, J. Dietrich, H. Labus, H. Lawin, and I. Mohos, “Fast Kicker Extraction at COSY-J??lich”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B14, pp. 1708-1710.
[n] T. S. Ueng, K. T. Hsu, K. H. Hwu, and K. K. Lin, “The Closed Orbit Measurement of SRRC Booster During Ramping”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ19, pp. 2497-2499.
[n] C. S. Hwang, C. H. Chang, M. H. Huang, G. J. Hwang, and P. K. Tseng, “Magnetic Field Features of the Asymmetric Magnetic Circuit on the Sextupole Magnet”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1247-1250.
[n] T. J. Shea et al., “Performance of the RHIC Injection Line Instrumentation Systems”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P049, pp. 2215-2217.
[n] I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390.
[n] S. Humphries, J. Petillo, and N. Dionne, “Modeling Secondary Emission in a Finite-Element Multipactor Code”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP008, pp. 390-396.
[n] A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1659-1662.
[n] N. R. Lobanov, M. C. Blacksell, P. Linardakis, and D. Tsifakis, “Terminal Voltage Stabilization of Pelletron Tandem Accelerator”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper TUB03, pp. 124-128.
[n] L. Zhao, E. G. Evstati, J. S. Kim, E. N. Beebe, and A. I. Pikin, “Simulation of Electron and Ion Dynamics in an EBIS”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO17, pp. 97-100.
[n] C. Chianelli, R. Azoulay, A. Curtoni, G. Jouve, and A. Zeitoun-Fakiris, “Very Low Current Field Electron Emission From Anodized Niobium”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F10, pp. XX-XX.
[n] W. Xu et al., “Progress of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 64-66. doi:10.18429/JACoW-SRF2017-MOPB009
[n] J. D. Gilpatrick et al., “Experience with the Low Energy Demonstration Accelerator (LEDA) Halo Experiment Beam Instrumentation”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH097, pp. 2311-2313.
[n] E. Meier, S. Biedron, G. LeBlanc, and M. J. Morgan, “Artificial Intelligence Systems for Electron Beam Parameters Optimization at the Australian Synchrotron LINAC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC025, pp. 1770-1772.
[n] D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393.
[n] B. P. Murin, B. B. Bondarev, and A. P. Durkin, “An Approach to Design of a Robust Focusing Channel”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-44, pp. 731-733.
[n] V. Lev, E. Miginsky, V. Repkov, V. Shkaruba, V. Syrovatin, and V. Tsukanov, “3.5 Tesla 49-pole superconducting wiggler for DLS”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MONP03, pp. XX-XX.
[n] V. I. Shvedunov, W. P. Trower, A. S. Alimov, D. I. Ermakov, B. S. Ishkhanov, and E. A. Knapp, “Industrial High-Current Electron LINACs”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B01, pp. 803-805.
For LaTeX
Use Complete Form
For BibTeX
References
- V. Schlott, M. Dach, Ch. David, B. Kalantari, M. Pedrozzi, and A. Streun, “Using Visible Synchrotron Radiation at the SLS Diagnostics Beamline”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT025, pp. 2526-2528.
- R. Macek, M. Plum, R. Hutson, D. Fitzgerald, S. Frankle, and C. Wilkinson, “Stripper-Foil Scan Studies of the First-Turn Beam Loss Mechanism in the LAMPF Proton Storage Ring (PSR)”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 366-369.
- B. K. Stillwell et al., “Research and Development on the Storage Ring Vacuum System for the APS Upgrade Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 92-95.
- X. Escaler, V. Arbo Sang?â, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Thermo-Fluid Numerical Simulation of the Crotch Absorbers' Cooling Pinholes for ALBA Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 165-168.
- M. Farkhondeh et al., “Status of the MIT-Bates South Hall Ring Commissioning”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2054-2057.
- A. M. Vetter, T. L. Buller, D. H. Dowell, and P. E. Johnson, “First Operation of the HAP/MOPA Traveling Wave Structure at Boeing FEL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P035, pp. 2950-2952.
- T. Mottershead et al., “Design and Operation of a Proton Microscope for Radiography at 800 MeV”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAA004, pp. 702-704.
- H. D. Glass et al., “Permanent Gradient Magnets for the 8 GeV Transfer Line at FNAL”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P014, pp. 3263-3265.
- B. X. Yang, S. H. Lee, J. W. Morgan, and H. Shang, “High-Energy X-Ray Pinhole Camera for High-Resolution Electron Beam Size Measurements”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 504-507.
- M. Chanel, J. Hansen, J.-M. Laurent, N. Madsen, and E. Mahner, “Experimental Investigation of Impact-Induced Molecular Desorption by 4.2 MeV/u Pb Ions”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH036, pp. 2165-2167.
- B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4336-4339.
- M. Dach, T. Korhonen, and T. Pal, “Interfacing CANbus to EPICS at the Swiss Light Source”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP569, pp. XX-XX.
- C. S. Hwang, C. H. Chang, T. C. Fan, G. J. Hwang, F. U. Lin, and P. K. Tseng, “Results Analysis of Measurement of the Multipole Magnet with Hall Probe”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1244-1247.
- M. Slater, W. Miller, and W. Slater, “Developing a Clinical Proton Accelerator Facility: Consortium-Assisted Technology Transfer”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 532-537.
- V. I. Shvedunov, A. I. Karev, V. N. Melekhin, N. P. Sobenin, and W. P. Trower, “Improved Mobile 70 MeV Race-Track Microtron Design”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR05, pp. 807-809.
- C. Chianelli, A. Curtoni, A. Zeitoun-Fakiris, J. Jodet, and I. Regardin, “Microscopic Analysis of Niobium Field Electron Emitters”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F09, pp. XX-XX.
- C. C. Hall, D. L. Bruhwiler, N. M. Cook, J. P. Edelen, and S. D. Webb, “Simulation of Perturbative Effects in IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3422-3424.
- G. O. Bolme et al., “Commissioning of the First Drift Tube Linac Module in the Ground Test Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1669-1672.
- M. Krishnan et al., “Energetic Condensation Growth of MgB2 Thin-Films for SRF Applications”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO068, pp. 391-395.
- M. M. Kirk, D. Ondreka, and P. J. Spiller, “SIS-18 RF Knock-Out Optimization Studies”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI007, pp. 297-299.
- S. Baird et al., “Oxygen Ions in LEAR”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 580-583.
- A. Balkcum et al., “Design and Operation of a High Power L-Band Multiple Beam Klystron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT031, pp. 2170-2172.
- A. C. Paul et al., “DARHT-II Energy Analyzer”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB055, pp. 2533-2535.
- T. T. Arkan et al., “LCLS-II Cryomodules Production Experience and Lessons Learned at Fermilab”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 709-714.
- T. Giacomini, P. Forck, V. Skachkov, A. Gobulev, D. A. Liakin, and A. Vetrov, “Development of a Permanent Magnet Residual Gas Profile Monitor With Fast Readout”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PM17, pp. XX-XX.
- B. Dhital, D. Sagan, E. Hamwi, G. Hoffstaetter, K. Brown, and W. Lin, “Bmad based particle tracking simulation for slow resonant extraction”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC69, pp. 1164-1167.
- F. Varela, F. B. Bernard, M. Gonzalez-Berges, H. Milcent, and L. B. Petrova, “Monitoring Control Applications at CERN”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMU033, pp. 1141-1144.
- M. Yoon, J. Choi, G. H. Kim, and T. Lee, “Closed Orbit Distortion and Correction of the PLS 2 GeV Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 646-649.
- J. Nash et al., “Precision Measurements of the SLC Beam Energy”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1550-1553.
- B. Krietenstein, K. Ko, T. Lee, U. Becker, T. Weiland, and M. Dohlus, “Spurious Oscillations in High Power Klystrons”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAQ06, pp. 1533-1535.
- J. F. O et al., “PSR Electron Cloud Detector and Suppressor Mechanical Design and Fabrication”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS054, pp. 4117-4119.
- F. Varela, U. Epting, M. Gonzalez Corral, E. Mandilara, and S. Podgorski, “MARS: Easing Maintenance and Interventions for CERN Controls”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1748-1752.
- B. Groussin, M. Martinez-Calderon, E. Granados, and B. Marsh, “Simulation of plasmonic effects in nanostructured copper surfaces for field-assisted photoemission”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA002, pp. 1354-1357.
- R. M. Franks, O. Alford, and L. R. Bertolini, “"Paper-Less" CAD/CAM for Accelerator Components”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH104, pp. 1450-1452.
- V. Karpenko, P. A. Seidl, R. M. Franks, and S. M. Lund, “An Engineering Overview of an Electrostatic Quadrupole Lattice for a High Current Transport Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH103, pp. 1447-1449.
- A. Chen et al., “Automation of sample alignment for neutron beamlines”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS070, this conference.
- S. Peggs et al., “Optics for Strong Hadron Cooling in EIC HSR-IR2”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1920-1923.
- N. Neveu, B. Jacobson, J. Sikora, and J. Diaz Cruz, “Higher order mode detection as a beam offset monitor for LCLS-II”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEBN2, unpublished.
- S. J. Cooke et al., “An Advanced Electromagnetic Eigenmode Solver for Vacuum Electronics Devices - CTLSS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDL3, pp. 360-362.
- J. W. Staples et al., “The Fabrication and Initial Testing of the SNS RFQ”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH108, pp. 3930-3932.
- B. X. Yang, N. Arnold, W. Berg, E. R. Rotela, S. Sharma, and S. J. Stein, “Design and Performance of a Compact Imaging System for the APS Linac Bunch Compressor”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH107, pp. 2335-2337.
- D. K. Olsen et al., “Recent Developments at the Holifield Heavy Ion Research Facility”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 452-455.
- E. Bouquerel et al., “Design of a Beamline from CYRC?® for Radiobiological Experiments”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 359-362.
- J. Beebe-Wang, N. L. D, A. U. Luccio, and S. Machida, “Space Charge Simulation Methods Incorporated in some Multi-Particle Tracking Codes and their Results Comparison”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE059, pp. 1329-1331.
- Y. Jongen et al., “New Features in the Design of the IBA-SHI Proton Therapy Facility”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2610-2613.
- M. A. Green et al., “Progress on the MICE Liquid Absorber Cooling and Cryogenic Distribution System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPP018, pp. 1601-1603.
- J. Bojowald, J. Dietrich, H. Labus, H. Lawin, and I. Mohos, “Fast Kicker Extraction at COSY-J??lich”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B14, pp. 1708-1710.
- T. S. Ueng, K. T. Hsu, K. H. Hwu, and K. K. Lin, “The Closed Orbit Measurement of SRRC Booster During Ramping”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ19, pp. 2497-2499.
- C. S. Hwang, C. H. Chang, M. H. Huang, G. J. Hwang, and P. K. Tseng, “Magnetic Field Features of the Asymmetric Magnetic Circuit on the Sextupole Magnet”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1247-1250.
- T. J. Shea et al., “Performance of the RHIC Injection Line Instrumentation Systems”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P049, pp. 2215-2217.
- I. V. Konoplev et al., “2D and 1D Surface Photonic Band Gap Structures for Accelerator Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH155, pp. 1388-1390.
- S. Humphries, J. Petillo, and N. Dionne, “Modeling Secondary Emission in a Finite-Element Multipactor Code”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP008, pp. 390-396.
- A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1659-1662.
- N. R. Lobanov, M. C. Blacksell, P. Linardakis, and D. Tsifakis, “Terminal Voltage Stabilization of Pelletron Tandem Accelerator”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper TUB03, pp. 124-128.
- L. Zhao, E. G. Evstati, J. S. Kim, E. N. Beebe, and A. I. Pikin, “Simulation of Electron and Ion Dynamics in an EBIS”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper PO17, pp. 97-100.
- C. Chianelli, R. Azoulay, A. Curtoni, G. Jouve, and A. Zeitoun-Fakiris, “Very Low Current Field Electron Emission From Anodized Niobium”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91F10, pp. XX-XX.
- W. Xu et al., “Progress of 650 MHz SRF Cavity for eRHIC SRF Linac”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 64-66.
- J. D. Gilpatrick et al., “Experience with the Low Energy Demonstration Accelerator (LEDA) Halo Experiment Beam Instrumentation”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH097, pp. 2311-2313.
- E. Meier, S. Biedron, G. LeBlanc, and M. J. Morgan, “Artificial Intelligence Systems for Electron Beam Parameters Optimization at the Australian Synchrotron LINAC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC025, pp. 1770-1772.
- D. H. Rowlands et al., “Design and Simulation of a Cusp Gun for Gyro-amplifier Application in High Frequency RF Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH156, pp. 1391-1393.
- B. P. Murin, B. B. Bondarev, and A. P. Durkin, “An Approach to Design of a Robust Focusing Channel”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-44, pp. 731-733.
- V. Lev, E. Miginsky, V. Repkov, V. Shkaruba, V. Syrovatin, and V. Tsukanov, “3.5 Tesla 49-pole superconducting wiggler for DLS”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MONP03, pp. XX-XX.
- V. I. Shvedunov, W. P. Trower, A. S. Alimov, D. I. Ermakov, B. S. Ishkhanov, and E. A. Knapp, “Industrial High-Current Electron LINACs”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B01, pp. 803-805.
Back to search