Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. J. Payne and S. A. Whitehead, “Fine Spatial Beam Loss Monitoring for the ISIS Proton Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH035, pp. 1079-1081.
[n] D. L. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Object Oriented C++ Software Components for Accelerator Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL6, pp. 369-371.
[n] R. Baer, M. Schwickert, and T. Fleck, “Status of the Control System for HICAT at an Advanced Stage of Commissioning: Functions, Restrictions and Experiences”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TOAA02, pp. 47-49.
[n] F. Hellberg et al., “Investigation of Quadrupole Magnets for the XFEL Project Using a Rotating Coil Set-up”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH044, pp. 345-347.
[n] R. Winje, “A 230 kJ Pulsed Power Supply”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1317-1321.
[n] K. Adachi et al., “An electron model of vertical FFA accelerator for Harmonytron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1434-1436. doi:10.18429/JACoW-IPAC2023-TUPA043
[n] W. R. Smythe, C. C. Friedrichs, and L. S. Walling, “Proton Synchrotron RF Cavity Mode Damper Tests”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 643-646.
[n] G. Shen, Y. Hu, M. R. Kraimer, K. Shroff, and D. Dezman, “NSLS II Middlelayer Services”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC155, pp. 467-470.
[n] C. Pai et al., “Mechanical Design of a Ferrite-Based Injection Kicker for SNS Accumulator Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB048, pp. 2144-2146.
[n] E. Jones, M. S. McAshan, and L. R. Suelzle, “Report on Performance of the Superconducting Injector for the Stanford Linear Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1000-1004.
[n] O. Felden, M. Bai, R. Gebel, and R. Hecker, “Activities for Isotope Sample Production and Radiation Effect Tests at JULIC/COSY J??lich”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 98-101. doi:10.18429/JACoW-Cyclotrons2016-MOP18
[n] T. M. Cobb, P. N. Denison, and N. P. Rees, “Development of Photon Beamline and Motion Control Software at Diamond Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA10, pp. 108-110.
[n] R. Ghanbari et al., “Surface characterization of mid-T heat treated Nb samples to investigate the origin of residual resistance”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3094-3097. doi:10.18429/JACoW-IPAC2023-WEPA194
[n] A. Xiao, V. Sajaev, and Y. P. Sun, “Simulation Studies of the Helical Superconducting Undulator Installed at APS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1290-1292. doi:10.18429/JACoW-IPAC2018-TUPMF018
[n] H. J. Choi, K. H. Gil, H.-S. Kang, H.-G. Lee, S. B. Lee, and K. W. Seo, “Introduction to WPS System Designed to Measure the Change of Location for PAL-XFEL Girder”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2693-2695. doi:10.18429/JACoW-IPAC2016-WEPOR015
[n] A. Luedeke, “The Operation Event Logging System of the SLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC142, pp. 3318-3320.
[n] J. Haimson and B. Mecklenburg, “HV Injection Phase Orbit Characteristics for Sub-Picosecond Bunch Operation with a High Gradient 17 GHz Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC22, pp. 755-757.
[n] P. W. Allison, C. R. Emigh, E. A. Meyer, D. W. Mueller, and R. R. Stevens, “Operation of the LAMPF 750-keV Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 126-130.
[n] J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX.
[n] G. E. Lawler et al., “RF Testbed for Cryogenic Photoemission Studies”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2810-2813. doi:10.18429/JACoW-IPAC2021-WEPAB096
[n] A. Aloev, R. Bartolini, B. Krause, A. Petrov, and M. Thede, “Status of the PETRA IV electromagnets”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3628-3630. doi:10.18429/JACoW-IPAC2023-WEPM033
[n] I. Sato et al., “Development of a CW Electron Linac Structure Using a Traveling-Wave Resonant Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 533-536.
[n] G. Rakowsky, J. J. Aspenleiter, W. S. Graves, L. Solomon, and P. M. Stefan, “Magnetic Measurements on an In-Vacuum Undulator for the NSLS X-Ray Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P021, pp. 3497-3499.
[n] K. Harkay, V. K. Bharadwaj, and P. Colestock, “Studies of Coupled-bunch Modes in the Fermilab Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1830-1833.
[n] R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Smooth Rapid Current Build-up”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2400-2403.
[n] H. J. Choi, M. S. Chae, J. H. Hong, H.-S. Kang, and S. J. Park, “Results Produced after Measuring PAL-ITF Beam Diagnostic Instruments”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2903-2905. doi:10.18429/JACoW-IPAC2014-THPRO021
[n] M. G. Mazarakis et al., “RADLAC-II Accelerator Beam Experiments”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 908-911.
[n] Y. Yonemura et al., “Development of FFA at Center for Accelerator and Beam Applied Science of Kyushu University”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS052, unpublished.
[n] R. E. Laxdal, K. Fong, A. Grassellino, W. R. Rawnsley, I. Sekachev, and V. Zvyagintsev, “First Cold Test with the TRIUMF ISAC-II Phase II Cryomodule”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP052, pp. 2119-2119.
[n] R. Baer, M. Schwickert, U. Weinrich, and T. Fleck, “Experiences with an Industrial Control System: Traceability of Specifications, Commissioning Support and Conclusions from the HICAT Project”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB39, pp. 247-249.
[n] V. V. Kushin, “Ion Acceleration in APF Systems”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper FR2-01, pp. 957-961.
[n] P. Forck and A. Bank, “Residual Gas Fluorescence for Profile Measurements at the GSI UNILAC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI056, pp. 1885-1887.
[n] J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS21, pp. XX-XX.
[n] V. Shiltsev and A. Zinchenko, “Electron Beam Distortions in Beam-Beam Compensation Setup”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP91, pp. 1692-1694.
[n] E. A. Crosbie, “Effect of Synchrotron Radiation in the Propsed 4-GeV Argonne Microtron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3218-3221.
[n] S. Abbott, J. Alonso, J. Brown, J. Kalnins, G. Krebs, and R. Reimers, “Design of a Pulsed Switching Magnet for the Bevalac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 372-375.
[n] K. R. Prestwich and D. L. Johnson, “Development of a 18- Megavolt Marx Generator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 64-70.
[n] S. A. Griffiths, M. T. Heron, and D. E. Poole, “Commissioning of the New Magnet Power Converters on the SRS, and Operational Experience”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP036G, pp. 2329-2330.
[n] S. Zhou, J. Yang, C. Yu, W. Zhang, and Y. Zhu, “Radiation damage and refurbishment of undulator in SXFEL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB058, unpublished.
[n] K. H. Gil, H. J. Choi, J. Y. Huang, M. H. Jung, and J. H. Lim, “Analysis and Design of a New Kirkpatrick-Baez Mirror System for Microbeams”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2081-2083. doi:10.18429/JACoW-IPAC2014-WEPRO059
For LaTeX
Use Complete Form
For BibTeX
References
- S. J. Payne and S. A. Whitehead, “Fine Spatial Beam Loss Monitoring for the ISIS Proton Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH035, pp. 1079-1081.
- D. L. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Object Oriented C++ Software Components for Accelerator Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDL6, pp. 369-371.
- R. Baer, M. Schwickert, and T. Fleck, “Status of the Control System for HICAT at an Advanced Stage of Commissioning: Functions, Restrictions and Experiences”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TOAA02, pp. 47-49.
- F. Hellberg et al., “Investigation of Quadrupole Magnets for the XFEL Project Using a Rotating Coil Set-up”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH044, pp. 345-347.
- R. Winje, “A 230 kJ Pulsed Power Supply”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1317-1321.
- K. Adachi et al., “An electron model of vertical FFA accelerator for Harmonytron”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA043, pp. 1434-1436.
- W. R. Smythe, C. C. Friedrichs, and L. S. Walling, “Proton Synchrotron RF Cavity Mode Damper Tests”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 643-646.
- G. Shen, Y. Hu, M. R. Kraimer, K. Shroff, and D. Dezman, “NSLS II Middlelayer Services”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC155, pp. 467-470.
- C. Pai et al., “Mechanical Design of a Ferrite-Based Injection Kicker for SNS Accumulator Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB048, pp. 2144-2146.
- E. Jones, M. S. McAshan, and L. R. Suelzle, “Report on Performance of the Superconducting Injector for the Stanford Linear Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1000-1004.
- O. Felden, M. Bai, R. Gebel, and R. Hecker, “Activities for Isotope Sample Production and Radiation Effect Tests at JULIC/COSY J??lich”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 98-101.
- T. M. Cobb, P. N. Denison, and N. P. Rees, “Development of Photon Beamline and Motion Control Software at Diamond Light Source”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA10, pp. 108-110.
- R. Ghanbari et al., “Surface characterization of mid-T heat treated Nb samples to investigate the origin of residual resistance”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA194, pp. 3094-3097.
- A. Xiao, V. Sajaev, and Y. P. Sun, “Simulation Studies of the Helical Superconducting Undulator Installed at APS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1290-1292.
- H. J. Choi, K. H. Gil, H.-S. Kang, H.-G. Lee, S. B. Lee, and K. W. Seo, “Introduction to WPS System Designed to Measure the Change of Location for PAL-XFEL Girder”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2693-2695.
- A. Luedeke, “The Operation Event Logging System of the SLS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC142, pp. 3318-3320.
- J. Haimson and B. Mecklenburg, “HV Injection Phase Orbit Characteristics for Sub-Picosecond Bunch Operation with a High Gradient 17 GHz Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPC22, pp. 755-757.
- P. W. Allison, C. R. Emigh, E. A. Meyer, D. W. Mueller, and R. R. Stevens, “Operation of the LAMPF 750-keV Injector”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 126-130.
- J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX.
- G. E. Lawler et al., “RF Testbed for Cryogenic Photoemission Studies”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2810-2813.
- A. Aloev, R. Bartolini, B. Krause, A. Petrov, and M. Thede, “Status of the PETRA IV electromagnets”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM033, pp. 3628-3630.
- I. Sato et al., “Development of a CW Electron Linac Structure Using a Traveling-Wave Resonant Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 533-536.
- G. Rakowsky, J. J. Aspenleiter, W. S. Graves, L. Solomon, and P. M. Stefan, “Magnetic Measurements on an In-Vacuum Undulator for the NSLS X-Ray Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P021, pp. 3497-3499.
- K. Harkay, V. K. Bharadwaj, and P. Colestock, “Studies of Coupled-bunch Modes in the Fermilab Booster”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1830-1833.
- R. L. Gluckstern and R. K. Cooper, “Beam Breakup with Smooth Rapid Current Build-up”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2400-2403.
- H. J. Choi, M. S. Chae, J. H. Hong, H.-S. Kang, and S. J. Park, “Results Produced after Measuring PAL-ITF Beam Diagnostic Instruments”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2903-2905.
- M. G. Mazarakis et al., “RADLAC-II Accelerator Beam Experiments”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 908-911.
- Y. Yonemura et al., “Development of FFA at Center for Accelerator and Beam Applied Science of Kyushu University”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS052, this conference.
- R. E. Laxdal, K. Fong, A. Grassellino, W. R. Rawnsley, I. Sekachev, and V. Zvyagintsev, “First Cold Test with the TRIUMF ISAC-II Phase II Cryomodule”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP052, pp. 2119-2119.
- R. Baer, M. Schwickert, U. Weinrich, and T. Fleck, “Experiences with an Industrial Control System: Traceability of Specifications, Commissioning Support and Conclusions from the HICAT Project”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB39, pp. 247-249.
- V. V. Kushin, “Ion Acceleration in APF Systems”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper FR2-01, pp. 957-961.
- P. Forck and A. Bank, “Residual Gas Fluorescence for Profile Measurements at the GSI UNILAC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI056, pp. 1885-1887.
- J. B?ñhr et al., “Diagnostics for the Photon Injector Test Facility in Desy Zeuthen”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS21, pp. XX-XX.
- V. Shiltsev and A. Zinchenko, “Electron Beam Distortions in Beam-Beam Compensation Setup”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP91, pp. 1692-1694.
- E. A. Crosbie, “Effect of Synchrotron Radiation in the Propsed 4-GeV Argonne Microtron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3218-3221.
- S. Abbott, J. Alonso, J. Brown, J. Kalnins, G. Krebs, and R. Reimers, “Design of a Pulsed Switching Magnet for the Bevalac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 372-375.
- K. R. Prestwich and D. L. Johnson, “Development of a 18- Megavolt Marx Generator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 64-70.
- S. A. Griffiths, M. T. Heron, and D. E. Poole, “Commissioning of the New Magnet Power Converters on the SRS, and Operational Experience”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP036G, pp. 2329-2330.
- S. Zhou, J. Yang, C. Yu, W. Zhang, and Y. Zhu, “Radiation damage and refurbishment of undulator in SXFEL”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB058, this conference.
- K. H. Gil, H. J. Choi, J. Y. Huang, M. H. Jung, and J. H. Lim, “Analysis and Design of a New Kirkpatrick-Baez Mirror System for Microbeams”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2081-2083.
Back to search