Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] T. Phimsen et al., “Conceptual Design of Vacuum Chamber for SPS-II Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1666-1668. doi:10.18429/JACoW-IPAC2019-TUPGW109
[n] W. Li et al., “New insertion device control system for the APS upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1394-1397. doi:10.18429/JACoW-IPAC2024-TUPG61
[n] W. X. Cheng, B. Bacha, A. Blednykh, Y. Li, and O. Singh, “Longitudinal Bunch Profile Measurement at NSLS2 Storage Ring”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 251-255. doi:10.18429/JACoW-IBIC2015-MOPB083
[n] V. Ptitsin and Yu. Shatunov, “Siberian Snakes for Electron Storage Rings”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P022, pp. 3500-3502.
[n] E. Malandain and P. Skarek, “An Expert System for Accelerator Fault Diagnosis”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 559-562.
[n] F. Di Maio, W. Heinze, and F. Perriollat, “Experience with the Use of Macintrotte" for Commissioning Process Equipment of the LEP Pre-Injector"”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 597-600.
[n] S. Cousineau, “Journey to world’s highest power hadron beams at SNS”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOXB1, unpublished.
[n] A. A. Fateev, E. V. Gorbachev, H. P. Nazlev, and V. A. Bulanov, “The Pulsed High Voltage Power Supply for the NICA Booster Injection System”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 592-593. doi:10.18429/JACoW-RUPAC2016-THPSC024
[n] M. Borland, N. Sereno, and A. Lumpkin, “Use of Coherent Transition Radiation to Set Up the APS RF Thermionic Gun to Produce High-Brightness Beams for SASE FEL Experiments”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOB17, pp. 134-136.
[n] A. P. Verweij, N. J. Sammut, W. Venturini Delsolaro, and R. Wolf, “Pre-Cycle Selection for the Superconducting Main Magnets of the Large Hadron Collider”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP054, pp. 259-261.
[n] J. C. Biasci, “The Extremely Brilliant Source (EBS) Project”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEIO01, pp. XX-XX.
[n] X. Yang et al., “Interferometric Measurement of Bunch Length of a 3Mev Picocoulomb Electron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2766-2769. doi:10.18429/JACoW-IPAC2019-WEPGW114
[n] V. H. Hardion, M. Lindberg, and D. P. Spruce, “The MAX IV Way of Agile Project Management for the Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1021. doi:10.18429/JACoW-ICALEPCS2019-WEMPL008
[n] S. Anderson et al., “First Operation of the Upgraded SLAC A-Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP110G, pp. 2468-2470.
For LaTeX
Use Complete Form
For BibTeX
References
- T. Phimsen et al., “Conceptual Design of Vacuum Chamber for SPS-II Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1666-1668.
- W. Li et al., “New insertion device control system for the APS upgrade”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG61, pp. 1394-1397.
- W. X. Cheng, B. Bacha, A. Blednykh, Y. Li, and O. Singh, “Longitudinal Bunch Profile Measurement at NSLS2 Storage Ring”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 251-255.
- V. Ptitsin and Yu. Shatunov, “Siberian Snakes for Electron Storage Rings”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P022, pp. 3500-3502.
- E. Malandain and P. Skarek, “An Expert System for Accelerator Fault Diagnosis”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 559-562.
- F. Di Maio, W. Heinze, and F. Perriollat, “Experience with the Use of Macintrotte" for Commissioning Process Equipment of the LEP Pre-Injector"”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 597-600.
- S. Cousineau, “Journey to world’s highest power hadron beams at SNS”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOXB1, unpublished.
- A. A. Fateev, E. V. Gorbachev, H. P. Nazlev, and V. A. Bulanov, “The Pulsed High Voltage Power Supply for the NICA Booster Injection System”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 592-593.
- M. Borland, N. Sereno, and A. Lumpkin, “Use of Coherent Transition Radiation to Set Up the APS RF Thermionic Gun to Produce High-Brightness Beams for SASE FEL Experiments”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOB17, pp. 134-136.
- A. P. Verweij, N. J. Sammut, W. Venturini Delsolaro, and R. Wolf, “Pre-Cycle Selection for the Superconducting Main Magnets of the Large Hadron Collider”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP054, pp. 259-261.
- J. C. Biasci, “The Extremely Brilliant Source (EBS) Project”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEIO01, pp. XX-XX.
- X. Yang et al., “Interferometric Measurement of Bunch Length of a 3Mev Picocoulomb Electron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2766-2769.
- V. H. Hardion, M. Lindberg, and D. P. Spruce, “The MAX IV Way of Agile Project Management for the Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1021.
- S. Anderson et al., “First Operation of the Upgraded SLAC A-Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP110G, pp. 2468-2470.
Back to search