Favourites
For Word
[n] J. A. Uythoven et al., “Calibration Measurements of the LHC Beam Dumping System Extraction Kicker Magnets”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS015, pp. 1520-1522.
[n] T. Lindqvist and E. Laface, “Field Parametrisation for the ESS Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3044-3046. doi:10.18429/JACoW-IPAC2014-THPRO072
[n] W. J. M. Weterings, C. Bracco, L. O. Jorat, M. Meddahi, R. Noulibos, and P. Van Trappen, “The New Injection Region of the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2414-2417. doi:10.18429/JACoW-IPAC2019-WEPMP039
[n] M. Siano et al., “Nanostructured targets for advanced beam diagnostics”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 562-566. doi:10.18429/JACoW-IBIC2025-TUPMO39
[n] A. Canesse et al., “Radiation levels in the LHC tunnel and impact on electronics during the 2023 Pb ion run”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3355-3358. doi:10.18429/JACoW-IPAC2024-THPG42
[n] E. Peschardt and J. P. H. Sladen, “Phase Compensated Fibre-Optic Links for the LEP RF Reference Distribution”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1960-1963.
[n] G. Li et al., “Trapped mode and wakefield evaluation of bellows for 197 MHz superconducting crab cavities”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 256-259. doi:10.18429/JACoW-SRF2025-MOP83
[n] C. Hauviller and S. Weisz, “Installation of A Particle Accelerator: from Theory to Practice. The LHC Example”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT020, pp. 1867-1869.
[n] J. A. Einstein-Curtis et al., “Classification and Prediction of Superconducting Magnet Quenches”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 856-859. doi:10.18429/JACoW-ICALEPCS2023-TUPDP117
[n] I. L. Sheynman, A. Altmark, S. Baturin, and A. Kanareykin, “The Analysis of Tunable Dielectric Loaded Wakefield Accelerating Structure of Rectangular Geometry”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD057, pp. 4413-4415.
[n] R. E. Laxdal et al., “Status of Superconducting Electron Linac Driver for Rare Ion Beam Production at TRIUMF”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOC01, pp. 31-35.
[n] E. B. Holzer and B. Dehning, “Longitudinal Loss Distribution along the LHC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT011, pp. 2484-2486.
[n] G. Shirkov et al., “The Recent JINR Advances in Technology Development on Linear Accelerators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC009, pp. 1006-1008.
[n] S. Hashimoto et al., “Construction and Magnetic Field Measurement of Quasi-Periodic Undulator”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP092G, pp. 2552-2554.
[n] S. M. Polozov, A. E. Aksentyev, and T. Kulevoy, “Beam Dynamics and Accelerating Cavity Electrodynamics' Simulation of CW 2 MeV Proton RFQ”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3286-3288. doi:10.18429/JACoW-IPAC2014-THPME030
[n] E. Syresin et al., “Design of a Novel Tubular Electron String Ion Source (TESIS)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC141, pp. 403-405.
[n] H. Deruyter, R. Miller, A. V. Mishin, J. Potter, T. Roumbanis, and R. Schonberg, “Properties and Possible Applications of Multiple Beam Coupled Cavity Structure”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP118G, pp. 810-812.
[n] O. Stein et al., “Investigation of Injection Losses at the Large Hadron Collider with Diamond Based Particle Detectors”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 310-312. doi:10.18429/JACoW-IPAC2016-MOPMR031
[n] O. O. Andreassen et al., “Turn-key Applications for Accelerators with LabVIEW-RADE”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMAU007, pp. 670-672.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Uythoven et al., “Calibration Measurements of the LHC Beam Dumping System Extraction Kicker Magnets”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS015, pp. 1520-1522.
- T. Lindqvist and E. Laface, “Field Parametrisation for the ESS Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3044-3046.
- W. J. M. Weterings, C. Bracco, L. O. Jorat, M. Meddahi, R. Noulibos, and P. Van Trappen, “The New Injection Region of the CERN PS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2414-2417.
- M. Siano et al., “Nanostructured targets for advanced beam diagnostics”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 562-566.
- A. Canesse et al., “Radiation levels in the LHC tunnel and impact on electronics during the 2023 Pb ion run”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG42, pp. 3355-3358.
- E. Peschardt and J. P. H. Sladen, “Phase Compensated Fibre-Optic Links for the LEP RF Reference Distribution”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1960-1963.
- G. Li et al., “Trapped mode and wakefield evaluation of bellows for 197 MHz superconducting crab cavities”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP83, pp. 256-259.
- C. Hauviller and S. Weisz, “Installation of A Particle Accelerator: from Theory to Practice. The LHC Example”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT020, pp. 1867-1869.
- J. A. Einstein-Curtis et al., “Classification and Prediction of Superconducting Magnet Quenches”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP117, pp. 856-859.
- I. L. Sheynman, A. Altmark, S. Baturin, and A. Kanareykin, “The Analysis of Tunable Dielectric Loaded Wakefield Accelerating Structure of Rectangular Geometry”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD057, pp. 4413-4415.
- R. E. Laxdal et al., “Status of Superconducting Electron Linac Driver for Rare Ion Beam Production at TRIUMF”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOC01, pp. 31-35.
- E. B. Holzer and B. Dehning, “Longitudinal Loss Distribution along the LHC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT011, pp. 2484-2486.
- G. Shirkov et al., “The Recent JINR Advances in Technology Development on Linear Accelerators”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC009, pp. 1006-1008.
- S. Hashimoto et al., “Construction and Magnetic Field Measurement of Quasi-Periodic Undulator”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP092G, pp. 2552-2554.
- S. M. Polozov, A. E. Aksentyev, and T. Kulevoy, “Beam Dynamics and Accelerating Cavity Electrodynamics' Simulation of CW 2 MeV Proton RFQ”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3286-3288.
- E. Syresin et al., “Design of a Novel Tubular Electron String Ion Source (TESIS)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC141, pp. 403-405.
- H. Deruyter, R. Miller, A. V. Mishin, J. Potter, T. Roumbanis, and R. Schonberg, “Properties and Possible Applications of Multiple Beam Coupled Cavity Structure”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP118G, pp. 810-812.
- O. Stein et al., “Investigation of Injection Losses at the Large Hadron Collider with Diamond Based Particle Detectors”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 310-312.
- O. O. Andreassen et al., “Turn-key Applications for Accelerators with LabVIEW-RADE”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMAU007, pp. 670-672.
Back to search