JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. Biscari, D. Alesini, A. Ghigo, J. B. Jeanneret, and F. Marcellini, “CLIC Drive Beam Frequency Multiplication System Design”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP076, pp. 2673-2675. 
[n]	V. Sajaev, A. Douryan, R. Malone, X. Wang, and V. Yakimenko, “Diagnostics and Correction of the Electron Beam Trajectory in the Cornell Wiggler at the Accelerator Test Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA151, pp. 2942-2944. 
[n]	J. D. Fuerst, W. F. Toter, and K. W. Shepard, “Niobium to Stainless Steel Braze Transition Development”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP11, pp. 305-307. 
[n]	G. Baribaud, G. Benincasa, P. J. Horne, and D. Williams, “Microprocessors Help in Control and Beam Observation at the CERN PS Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1795-1798. 
[n]	R. Denz and F. Rodriguez-Mateos, “Detection of Resistive Transitions in LHC Superconducting Components”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH092, pp. 3445-3447. 
[n]	M. Kuntzsch, H. B??ttig, P. Michel, R. Schurig, and G. S. Staats, “Simple Multichannel Phase Supervising Circuit at Elbe”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO051, pp. 702-704. 
[n]	M. del Campo, I. Arredondo, M. G. Giacchini, L. G. Giovannini, and J. Jugo, “HyperArchiver: an Evolution of EPICS Channel Archiver”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THCB01, pp. 106-108. 
[n]	G. I. Batskikh, B. V. Bekhtev, V. A. Boiko, V. V. Elian, and A. V. Mishchenko, “Electron Accelerator for Transmutation of FIssion Products and Nuclear Fuel Cycle Actinides”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2601-2604. 
[n]	R. Kersevan, “Vacuum System Requirements for a HF e+e- Accelerator”, in Proc. HF'14, Beijing, China, Oct. 2014, paper FRT4B2, pp. 151-156. 
[n]	H. Zyngier et al., “The VUV Radiation Source Super-ACO”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3371-3374. 
[n]	M. Dohlus, “Computational Needs for XFELS”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEMPMP01, pp. 164-169. 
[n]	R. Bossart et al., “Tune Measurement and Control at the CERN-SPS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1902-1905. 
[n]	J. Rudolph, M. Abo-Bakr, T. Kamps, and J. Teichert, “Slice-Emittance Measurements at ELBE / SRF-Injector”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD50, pp. 416-418. 
[n]	R. Olsen and H. Langenbach, “High Precision Power Supplies for the National Synchrotron Light Source”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1408-1410. 
[n]	I. Hofmann, G. Franchetti, M. Giovannozzi, E. Metral, and M. Martini, “Nonlinear Resonance Benchmarking Experiment at the CERN Proton Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAA009, pp. 129-131. 
[n]	M. Abo-Bakr and G. Wuestefeld, “Sorting of Magnets for the BESSY II Booster and Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP008G, pp. 1314-1316. 
[n]	L. Emery, “Coupled-bunch Instabilites in the APS Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1713-1716. 
[n]	D. A. Bartkoski, A. V. Aleksandrov, S. M. Cousineau, S. Henderson, and J. A. Holmes, “The Development of Computational Tools for Halo Analysis and Study of Halo Growth in the Spallation Neutron Source Linear Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOAFI01, pp. 2768-2770. 
[n]	A. Bungau and R. J. Barlow, “Emittance Growth Due to High Order Angular Multipole Mode Wakefields in the ILC-BDS Collimators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN079, pp. 3402-3404. 
[n]	G. Olry et al., “Design and Industrial Fabrication of Beta=0.35 Spoke-type Cavity”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO035, pp. 2271-2273. 
[n]	B. G. Martlew, M. J. Pugh, and W. R. Rawlinson, “Present Status of the SRS Control System Upgrade Project”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP025L, pp. 1769-1771. 
[n]	S. Chel, X. Hanus, J. Jacob, A. Mosnier, O. Naumann, and F. Orsini, “HOM damping in SOLEIL Superconducting Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05C, pp. 1864-1866. 
[n]	M. A. Avramenko et al., “Meson Factory Injector Complex”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P02, pp. 310-313. 
[n]	G. N. Kim et al., “Pulsed Neutron Source using 100-MeV Electron Linac at Pohang Accelerator Laboratory”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP150, pp. 2593-2595. 
[n]	D. A. Ovsyannikov, V. V. Altsybeyev, and V. A. Kozynchenko, “Development of a Software Complex for Modeling, Analyzing and Optimization the Dynamics of Charged Particle Beams in Synchrotrons and Transport Channels”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 167-168. doi:10.18429/JACoW-RUPAC2018-TUPSA11
[n]	D. Qunell, C. Jensen, and D. Tinsley, “Kicker System for 8 GeV Proton Injection”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7P085, pp. 1287-1289. 
[n]	M. Abo-Bakr, J. Feikes, K. Holldack, H.-W. H??bers, D. Ponwitz, and G. W??stefeld, “Coherent mm-Radiation Experiments at the BESSY II Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A11, pp. 720-722. 
[n]	M. S. Champion, “RF Input Couplers and Windows: Performances, Limitations, and Recent Developments”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95G02, pp. 195-221. 
[n]	H. S. Butler, Z. Li, and H. A. Thiessen, “Using MOTER to Design PILAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 281-284. 
[n]	C. Jensen, B. Hanna, and R. Reilly, “A Fast Injection Kicker Magnet for the Tevatron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH024, pp. 3720-3722. 
[n]	P. Kneisel, A. Heidt, J. Mammosser, and G. M. Rao, “Sensitivity of CEBAF 5-Cell Cavities to External Pressure”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91F25, pp. XX-XX. 
[n]	J. E. Spencer and H. A. Thiessen, “Some High Resolution Techniques for Use with Negative Ion Beams”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P21, pp. 415-421. 
[n]	M. F. Yoon, S. Oh, W. Y. Yang, J. S. Chai, and J.-W. Kim, “Initial Design of a 13 MeV Cyclotron for Positron Emission Tomography: Design of the Main Magnet”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper J-05, pp. 677-680. 
[n]	C. C. Shang et al., “BBU Design of Linear Induction Accelerator Cells for Radiography Application”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P109, pp. 2633-2635. 
[n]	D. Boussard, T. Linnecar, and W. Scandale, “Recent Developments on Schottky Beam Diagnostics at the CERN SPS Collider”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1908-1911. 
[n]	G. Olry et al., “R&D On Spoke-type Cryomodule”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO007, pp. 2691-2693. 
[n]	N. Tokuda et al., “Stochastic Momentum Cooling of a Low Energy Beam at TARN”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2415-2418. 
[n]	P. Bricault, M. Dombsky, A. Dowling, and P. Schmor, “High Power Targets for ISOL Radioactive Ion Beam Facility”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAD003, pp. 439-443. 
[n]	D. Cheever, T. Ferrari, X. Geng, R. Page, and T. Zwart, “The Bates Phase and Amplitude Monitoring System .”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAP012, pp. XX-XX. 
[n]	J. I. M. Botman, W. H. C. Theuws, S. R. Weijers, M. Weiss, and F. F. de Wit, “An Automated Tuning Mechanism for the Eindhoven Racetrack Microtron”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP48C, pp. 1744-1748. 
[n]	A. Ageyev et al., “STATUS OF SUPERCONDUCTING RADIOFREQUENCY SEPARATOR CRYOGENIC SYSTEM”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THFO04, pp. XX-XX. 
[n]	A. H. Kemper, E. J. Ridderhof, W. H. C. Theuws, and C. J. Timmermans, “Electronic Detection Circuit for a Stripline Beam Position Monitor”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP029L, pp. 1618-1620. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search