Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. J. Knott and F. Hornstra, “On-Line Computation and Presentation of External Proton Beam Line Targeting Information”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 377-379.
[n] J. Hebling, G. Alm?ísi, J. A. F??l?Âp, M. I. Mechler, Z. Tibai, and Gy. T??th, “Simple Setups for Carrier-envelope-phase Stable Single-cycle Attosecond Pulse Generation”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper MOPSO30, pp. 63-67.
[n] S. Boychenko, B. Schofield, and P. Martel, “Scaling Up the Deployment and Operation of an ELK Technology Stack”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1437. doi:10.18429/JACoW-ICALEPCS2019-WEPHA139
[n] K. Ishiwata et al., “Development of Strip-Line Type Beam Position Monitor”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO460, pp. 178-180.
[n] M. A. Allen et al., “RF Superconducting Materials Research at SLAC”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1009-1013.
[n] S. A. Schmid, H. De Gersem, M. Dohlus, E. Gjonaj, and M. Krasilnikov, “Space Charge Field Beam Dynamics Simulations for the THz SASE FEL at PITZ”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 606-608. doi:10.18429/JACoW-FEL2019-THP009
[n] A. I. Kvasha and V. L. Serov, “Powerful RF Triode as Anode Modulator Vacuum Tube (Part Two)”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 378-381. doi:10.18429/JACoW-RUPAC2018-WEPSB50
[n] D. Einfeld, A. Kruessel, and M. Pont, “Magnetic Measurements of the ANKA Storage Ring Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP171, pp. 3375-3377.
[n] E. Syresin, K. H. Hiller, R. S. Makarov, H. J. Schriber, and B. Zh. Zalikhanov, “ILC Beam Energy Measurement based on Synchrotron Radiation from a Magnetic Spectrometer”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS022, pp. 2442-2444.
[n] R. True, “The Design of Gridded Pierce guns for Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2611-2614.
[n] K. Hasegawa, Y. Honda, H. Ino, M. Mizumoto, and N. Ouchi, “Beam Dynamics Design of a Proton Linac for the Neutron Science Project at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP05G, pp. 719-721.
[n] E. Kallos et al., “Experimental Results of a Plasma Wakefield Accelerator Using Multiple Electron Bunches”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEOBG02, pp. 1912-1914.
[n] G. Hemmie and M. Leneke, “Reduction of the Horizontal Antidamping in the DESY Electron Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2546-2549.
[n] J. Caporaso, “A Novel Design for a High Power Superconducting Delay Line”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9V019, pp. 1305-1307.
[n] G. Devanz et al., “Tests of 704 MHz 1MW Power Coupler at Saclay”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO032, pp. 630-633.
[n] V. L. Auslender et al., “INDUSTRIAL HIGH ENERGY ELECTRON ACCELERATORS TYPE ILU”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THCAU04, pp. XX-XX.
[n] G. Chen and B. R. An, “Towards a Time-Constrained Service-Oriented Architecture for Automation and Control in Large-Scale Dynamic Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 760-764. doi:10.18429/JACoW-ICALEPCS2017-TUPHA152
[n] H. Hanerfeld, W. B. Herrmannsfeldt, M. B. James, and R. H. Miller, “SLC Injector Modeling”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2510-2513.
[n] B. J. Patil, V. N. Bhoraskar, S. D. Dhole, S. T. Chavan, R. Krishnan, and S. N. Pethe, “Optimization of Dual Scattering Foil for 6 to 20 MeV Electron Beam Radiotherapy”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP010, pp. 2157-2159.
[n] G. A. Loew, K. L. Brown, R. H. Miller, D. A. Pistenma, and D. R. Walz, “Electron Linac Design for Pion Radiotherapy”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1006-1009.
[n] J. F. Cardona and D. C, “Local Magnetic Error Estimation using Action and Phase Jump Analysis of Orbit Data”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN010, pp. 3244-3246.
[n] R. J. Nawrocky, “Magnet Power Supply System for the ISABELLE Half-Cell Prototype”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1358-1361.
[n] P. Sudmuang, N. Juntong, P. Klysubun, T. Pulampong, and N. Suradet, “Beam Lifetime Studies for SPS Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3178-3180. doi:10.18429/JACoW-IPAC2017-WEPIK099
[n] M. Mizumoto, “A High Intensity Proton Linac Development for Neutron Science Research Program”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP08, pp. 662-664.
[n] T. Kramer et al., “Studies of Beam Losses from Failures of SPS Beam Dump Kickers”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN097, pp. 1607-1609.
[n] A. J. Tencate and B. Erd?®lyi, “A High-Precision Emission Computational Model for Ultracold Electron Sources”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 622-625. doi:10.18429/JACoW-NAPAC2019-WEYBA6
[n] J. Blau, W. B. Colson, R. P. Mansfield, S. P. Niles, and B. W. Williams, “Optical Mode Distortion in a Short Rayleigh Length Free Electron Laser”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS66, pp. XX-XX.
[n] V. Fedotov and L. Gluckstern, “Analytic and Numerical Analysis of the Longitudinal Coupling Impedance of an Annular Cut in a Coaxial Liner”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V043, pp. 1744-1746.
[n] S. Okuda, M. Takanaka, R. Kato, and S. Nam, “Absorption Spectroscopy Using High-Intensity Coherent Radiation from Short Electron Bunches of A Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH481, pp. 785-787.
[n] M. Sawamura, Y. Iwashita, and H. Takekoshi, “Post Coupler Studies for Alvarez Tanks”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-44, pp. 148-150.
[n] A. Lakatos, J. Pozimski, A. Jakob, and H. Klein, “Extraction and Low Energy Transport of Negative Ions”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4056, pp. 523-525.
[n] R. Saban et al., “The LHC Test String: First Operational Experience”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEO07A, pp. 358-360.
[n] S. Setzer, M. Krassilnikov, T. Weiland, and A. Novokhatski, “Emittance Growth in the FEL RF-Gun”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH071, pp. 2257-2259.
[n] E. Colton, “A 1-12 GeV/c Beam Transport for Transverse or Longitudinally Polarized Protons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3206-3209.
[n] C. Limborg et al., “PARMELA vs Measurements for GTF and DUVFEL”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI042, pp. 1786-1788.
[n] J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
[n] V. V. Bezuglov et al., “Beam Extraction System for Industrial Electron Accelerator ILU-14”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THBCH02, pp. 161-163.
[n] M. A. Chaudhri, J. C. Clark, and C. J. Parnell, “A Heavy Water Target for Fast Neutron Production by Cyclotrons”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper GC-03, pp. 679-681.
[n] Z. Y. Guo, C. E. Chen, J. X. Fang, Y. R. Lu, X. Q. Yan, and C. Zhang, “Design of a 200MHz Proton RFQ”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE102, pp. 903-905.
[n] M. G. Abbott and G. Rehm, “Tune Computation via Model Fitting to Swept Machine Response Measurement”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 490-494. doi:10.18429/JACoW-IBIC2019-WECO03
[n] C. W. Appelbee and M. G. Glover, “Digital Master Oscillator for the ISIS Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH111, pp. 3062-3064.
[n] V. V. Danilov, S. M. Cousineau, S. Henderson, J. A. Holmes, and M. Plum, “Injection Schemes for Self Consistent Space Charge Distributions”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT170, pp. 2227-2229.
[n] J.-M. Wang and J. H. Wu, “Resistive-Wall Coupled-Bunch Beam Breakup”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI086, pp. 1580-1582.
[n] K. Endo, H. Fukuma, and F. Q. Zhang, “Preliminary Orbit Measurement for Beam Based Alignment”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP049L, pp. 1657-1659.
For LaTeX
Use Complete Form
For BibTeX
References
- M. J. Knott and F. Hornstra, “On-Line Computation and Presentation of External Proton Beam Line Targeting Information”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 377-379.
- J. Hebling, G. Alm?ísi, J. A. F??l?Âp, M. I. Mechler, Z. Tibai, and Gy. T??th, “Simple Setups for Carrier-envelope-phase Stable Single-cycle Attosecond Pulse Generation”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper MOPSO30, pp. 63-67.
- S. Boychenko, B. Schofield, and P. Martel, “Scaling Up the Deployment and Operation of an ELK Technology Stack”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1437.
- K. Ishiwata et al., “Development of Strip-Line Type Beam Position Monitor”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO460, pp. 178-180.
- M. A. Allen et al., “RF Superconducting Materials Research at SLAC”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1009-1013.
- S. A. Schmid, H. De Gersem, M. Dohlus, E. Gjonaj, and M. Krasilnikov, “Space Charge Field Beam Dynamics Simulations for the THz SASE FEL at PITZ”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 606-608.
- A. I. Kvasha and V. L. Serov, “Powerful RF Triode as Anode Modulator Vacuum Tube (Part Two)”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 378-381.
- D. Einfeld, A. Kruessel, and M. Pont, “Magnetic Measurements of the ANKA Storage Ring Magnets”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP171, pp. 3375-3377.
- E. Syresin, K. H. Hiller, R. S. Makarov, H. J. Schriber, and B. Zh. Zalikhanov, “ILC Beam Energy Measurement based on Synchrotron Radiation from a Magnetic Spectrometer”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS022, pp. 2442-2444.
- R. True, “The Design of Gridded Pierce guns for Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2611-2614.
- K. Hasegawa, Y. Honda, H. Ino, M. Mizumoto, and N. Ouchi, “Beam Dynamics Design of a Proton Linac for the Neutron Science Project at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP05G, pp. 719-721.
- E. Kallos et al., “Experimental Results of a Plasma Wakefield Accelerator Using Multiple Electron Bunches”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEOBG02, pp. 1912-1914.
- G. Hemmie and M. Leneke, “Reduction of the Horizontal Antidamping in the DESY Electron Synchrotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2546-2549.
- J. Caporaso, “A Novel Design for a High Power Superconducting Delay Line”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9V019, pp. 1305-1307.
- G. Devanz et al., “Tests of 704 MHz 1MW Power Coupler at Saclay”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO032, pp. 630-633.
- V. L. Auslender et al., “INDUSTRIAL HIGH ENERGY ELECTRON ACCELERATORS TYPE ILU”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THCAU04, pp. XX-XX.
- G. Chen and B. R. An, “Towards a Time-Constrained Service-Oriented Architecture for Automation and Control in Large-Scale Dynamic Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 760-764.
- H. Hanerfeld, W. B. Herrmannsfeldt, M. B. James, and R. H. Miller, “SLC Injector Modeling”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2510-2513.
- B. J. Patil, V. N. Bhoraskar, S. D. Dhole, S. T. Chavan, R. Krishnan, and S. N. Pethe, “Optimization of Dual Scattering Foil for 6 to 20 MeV Electron Beam Radiotherapy”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP010, pp. 2157-2159.
- G. A. Loew, K. L. Brown, R. H. Miller, D. A. Pistenma, and D. R. Walz, “Electron Linac Design for Pion Radiotherapy”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1006-1009.
- J. F. Cardona and D. C, “Local Magnetic Error Estimation using Action and Phase Jump Analysis of Orbit Data”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN010, pp. 3244-3246.
- R. J. Nawrocky, “Magnet Power Supply System for the ISABELLE Half-Cell Prototype”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1358-1361.
- P. Sudmuang, N. Juntong, P. Klysubun, T. Pulampong, and N. Suradet, “Beam Lifetime Studies for SPS Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3178-3180.
- M. Mizumoto, “A High Intensity Proton Linac Development for Neutron Science Research Program”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP08, pp. 662-664.
- T. Kramer et al., “Studies of Beam Losses from Failures of SPS Beam Dump Kickers”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN097, pp. 1607-1609.
- A. J. Tencate and B. Erd?®lyi, “A High-Precision Emission Computational Model for Ultracold Electron Sources”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 622-625.
- J. Blau, W. B. Colson, R. P. Mansfield, S. P. Niles, and B. W. Williams, “Optical Mode Distortion in a Short Rayleigh Length Free Electron Laser”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS66, pp. XX-XX.
- V. Fedotov and L. Gluckstern, “Analytic and Numerical Analysis of the Longitudinal Coupling Impedance of an Annular Cut in a Coaxial Liner”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V043, pp. 1744-1746.
- S. Okuda, M. Takanaka, R. Kato, and S. Nam, “Absorption Spectroscopy Using High-Intensity Coherent Radiation from Short Electron Bunches of A Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH481, pp. 785-787.
- M. Sawamura, Y. Iwashita, and H. Takekoshi, “Post Coupler Studies for Alvarez Tanks”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-44, pp. 148-150.
- A. Lakatos, J. Pozimski, A. Jakob, and H. Klein, “Extraction and Low Energy Transport of Negative Ions”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4056, pp. 523-525.
- R. Saban et al., “The LHC Test String: First Operational Experience”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEO07A, pp. 358-360.
- S. Setzer, M. Krassilnikov, T. Weiland, and A. Novokhatski, “Emittance Growth in the FEL RF-Gun”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH071, pp. 2257-2259.
- E. Colton, “A 1-12 GeV/c Beam Transport for Transverse or Longitudinally Polarized Protons”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3206-3209.
- C. Limborg et al., “PARMELA vs Measurements for GTF and DUVFEL”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI042, pp. 1786-1788.
- J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
- V. V. Bezuglov et al., “Beam Extraction System for Industrial Electron Accelerator ILU-14”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THBCH02, pp. 161-163.
- M. A. Chaudhri, J. C. Clark, and C. J. Parnell, “A Heavy Water Target for Fast Neutron Production by Cyclotrons”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper GC-03, pp. 679-681.
- Z. Y. Guo, C. E. Chen, J. X. Fang, Y. R. Lu, X. Q. Yan, and C. Zhang, “Design of a 200MHz Proton RFQ”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE102, pp. 903-905.
- M. G. Abbott and G. Rehm, “Tune Computation via Model Fitting to Swept Machine Response Measurement”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 490-494.
- C. W. Appelbee and M. G. Glover, “Digital Master Oscillator for the ISIS Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH111, pp. 3062-3064.
- V. V. Danilov, S. M. Cousineau, S. Henderson, J. A. Holmes, and M. Plum, “Injection Schemes for Self Consistent Space Charge Distributions”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT170, pp. 2227-2229.
- J.-M. Wang and J. H. Wu, “Resistive-Wall Coupled-Bunch Beam Breakup”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI086, pp. 1580-1582.
- K. Endo, H. Fukuma, and F. Q. Zhang, “Preliminary Orbit Measurement for Beam Based Alignment”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP049L, pp. 1657-1659.
Back to search