Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. Chojnacki and S. Belomestnykh, “RF Power Coupler Performance at CESR and Study of a Multipactor Inhibited Coupler”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA006, pp. 560-565.
[n] K. W. Fong, C. M. Estes, J. M. Fisher, and R. T. Shelton, “Application Software Structures Enables NIF Operations”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THCT003, pp. XX-XX.
[n] R. T. Roseberry, S. Assadi, and G. R. Murdoch, “Development of a New Beam Diagnostics Platform”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE041, pp. 2669-2671.
[n] D. W. Cooke et al., “RF Superconductivity Research and Development at Los Alamos National Laboratory”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89B04, pp. XX-XX.
[n] M. Apollonio et al., “First Transparent Realignment Tests at the Diamond Storage Ring”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1772-1775. doi:10.18429/JACoW-IPAC2015-TUPJE062
[n] D. Barni and C. Pagani, “Conceptual Design of the Cryomodule for the TRASCO SC Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP7B06, pp. 2022-2024.
[n] M. Beutelspacher et al., “Electron Cooling Experiments at the Heidelberg Heavy Ion Storage Ring TSR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP14F, pp. 508-510.
[n] B. P. Xiao, M. Blaskiewicz, and T. Xin, “Anomalous Skin Effect Study of Normal Conducting Film”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1119-1121. doi:10.18429/JACoW-IPAC2021-MOPAB360
[n] L. P. Sun et al., “The Analysis of Module Failure in High Solid-state Amplifier for High Current RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 886-888. doi:10.18429/JACoW-LINAC2018-THPO090
[n] R. Baartman, “Invited Paper: Intensity Limitations in Compact H Cyclotrons”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper H-02, pp. 440-445.
[n] S. J. Park et al., “Development of S-Band Pulsed Klystron for PLS Linear Accelerator”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP16046, pp. XX-XX.
[n] F. Plassard, Y. Hidaka, Y. Li, T. V. Shaftan, V. V. Smaluk, and G. M. Wang, “Simultaneous Compensation of Phase and Amplitude Dependent Geometrical Resonances Using Octupoles”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1960-1963. doi:10.18429/JACoW-IPAC2021-TUPAB227
[n] J. T. Seeman, F. J. Decker, I. Hsu, and R. K. Jobe, “Multibunch Energy and Spectrum Control in the SLC High Energy Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3210-3213.
[n] H.-J. Kwon et al., “Beam Current and Energy Measurement of the PEFP 20 MeV Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN056, pp. 4129-4131.
[n] J. Resta-L??pez, J.-L. Fernandez-Hernando, and A. Latina, “Thermo-mechanical Analysis of the CLIC Post-Linac Energy Collimators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR030, pp. 1882-1884.
[n] N. A. Tahir et al., “Application of Particle Accelerators to High Energy Density Physics Research: The HEDgeHOB Collaboration”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA049, pp. 184-186.
[n] P. F. Beloshitsky, I. N. Meshkov, E. M. Syresin, and I. V. Titkova, “Magnet Lattice of the Synchrotron Radiation Source DELSY”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP6B05, pp. 708-710.
[n] A. Burrill, “Challenges in Realizing the LCLS-II Cryomodule Production”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 181-184. doi:10.18429/JACoW-LINAC2016-MOPLR020
[n] M. Miret, “Ultra Stiffness And Ultra Low Wawing LM Guide”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 48-49. doi:10.18429/JACoW-MEDSI2016-MOPE20
[n] S. Yamamoto, “Development of Very Short Period Undulators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1735-1739. doi:10.18429/JACoW-IPAC2018-WEXGBD1
[n] B. X. Yang, G. Decker, P. K. Den Hartog, S.-H. Lee, and K. W. Schlax, “Progress in the Development of a Grazing-incidence Insertion Device X-ray Beam Position Monitor”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP189, pp. 441-443.
[n] J. Bahrdt et al., “In-Vacuum APPLE II Undulator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4114-4116. doi:10.18429/JACoW-IPAC2018-THPMF031
[n] J. Wlodek and K. J. Gofron, “ADUVC - an EPICS Areadetector Driver for USB Video Class Devices”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1499. doi:10.18429/JACoW-ICALEPCS2019-WEPHA174
[n] S. Matsuzaki, M. Nishida, K. Sakaue, M. Washio, and H. Iijima, “Study of Cs-Te Photocathode for RF Electron Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1632-1634. doi:10.18429/JACoW-IPAC2015-TUPJE010
[n] T. Weis, “Injection Systems for High Current Ion Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 181-186.
[n] E. Forton et al., “Structural and Magnetic Properties of Cast Iron for Cyclotrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU4PB02, pp. 275-277.
[n] Z. Wu, C.-Y. Liao, C. Wu, and J.-K. Liao, “Implementation of EPU56 control system at the Taiwan Photon Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3301-3304. doi:10.18429/JACoW-IPAC2024-THPG22
[n] C. Gough and M. Mailand, “Septum and Kicker Systems for the SLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH032, pp. 3741-3743.
[n] T. L. Allison, H. Higgins, E. Martin, W. Merz, and S. Philip, “Jefferson Lab's Trim Card II”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE065, pp. 3670-3672.
[n] B?Âge M., Chrin J., “A CORBA Based Client-Server Model for Beam Dynamics Applications at the SLS”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P61, pp. XX-XX.
[n] B. Dwersteg et al., “Structure Studies for an S-Band Linear Collider”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-71, pp. 516-518.
[n] A. Ganshin et al., “Temperature Waves in SRF Research”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP104, pp. 719-723.
[n] A. Grudiev and W. Wuensch, “Design of an X-Band Accelerating Structure for the CLIC Main Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP062, pp. 933-935.
[n] M. Ikegami, “Progress in the Beam Commissioning of J-PARC Linac and its Upgrade Path”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MO201, pp. 16-20.
[n] W. Decking, V. Balandin, N. Golubeva, and F. Obier, “Fast Distribution of Pulses in Multiple Beam Line Facilities”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEOCI2, pp. 524-524.
[n] I. M. Malloch, E. S. Metzgar, L. Popielarski, and M. J. LaVere, “SRF Cavity Processing and Chemical Etching Development for the FRIB Linac”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB095, pp. 373-377.
[n] E. M?®tral, F. Caspers, M. Giovannozzi, A. Grudiev, T. Kroyer, and L. Sermeus, “Kicker Impedance Measurements for the Future Multi-turn Extraction of the CERN Proton Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH059, pp. 2919-2921.
[n] C. N. Regier, A. F. G. Leontowich, and D. M. Taylor, “Mechanical Engineering of a Cryo STXM at CLS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 381-386. doi:10.18429/JACoW-MEDSI2016-THAA02
[n] V. V. Paramonov and K. Floettmann, “RF Test of Standing Wave Deflecting Cavity with Minimized Level of Aberrations”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 866-868. doi:10.18429/JACoW-LINAC2018-THPO079
[n] D. R. Douglas, G. A. Krafft, and Ph. Piot, “Study of the Energy Compression Scheme to Energy-Recover an Electron Beam in the Presence of an FEL-interaction”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B13, pp. 1543-1545.
[n] J. M. Mueller et al., “Large-Scale Optical Synchronization System of the European XFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 253-256. doi:10.18429/JACoW-LINAC2018-MOPO121
[n] S. Jachim et al., “Review of the complex baseband RF cavity model and its applications”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR05, unpublished.
[n] M. Fujita, “PRESENT STATUS OF THE K=110 MEV AVF CYCLOTRON AT TOHOKU UNIVERSITY”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P18, pp. XX-XX.
[n] J. Forsberg, V. H. Hardion, and D. P. Spruce, “A Graphical Tool for Viewing and Interacting with a Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 681-684. doi:10.18429/JACoW-ICALEPCS2015-WEM309
[n] K. Saito and F. Furuta, “Nb/SUS Joint of Helium Vessel Base Plate for SRF Cavity Dressing”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO088, pp. 833-836.
[n] D. Schoerling, “Status of the ELENA Magnet System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1295-1297. doi:10.18429/JACoW-IPAC2014-TUPRO106
For LaTeX
Use Complete Form
For BibTeX
References
- E. Chojnacki and S. Belomestnykh, “RF Power Coupler Performance at CESR and Study of a Multipactor Inhibited Coupler”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper THA006, pp. 560-565.
- K. W. Fong, C. M. Estes, J. M. Fisher, and R. T. Shelton, “Application Software Structures Enables NIF Operations”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THCT003, pp. XX-XX.
- R. T. Roseberry, S. Assadi, and G. R. Murdoch, “Development of a New Beam Diagnostics Platform”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE041, pp. 2669-2671.
- D. W. Cooke et al., “RF Superconductivity Research and Development at Los Alamos National Laboratory”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89B04, pp. XX-XX.
- M. Apollonio et al., “First Transparent Realignment Tests at the Diamond Storage Ring”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1772-1775.
- D. Barni and C. Pagani, “Conceptual Design of the Cryomodule for the TRASCO SC Linac”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP7B06, pp. 2022-2024.
- M. Beutelspacher et al., “Electron Cooling Experiments at the Heidelberg Heavy Ion Storage Ring TSR”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP14F, pp. 508-510.
- B. P. Xiao, M. Blaskiewicz, and T. Xin, “Anomalous Skin Effect Study of Normal Conducting Film”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1119-1121.
- L. P. Sun et al., “The Analysis of Module Failure in High Solid-state Amplifier for High Current RFQ”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 886-888.
- R. Baartman, “Invited Paper: Intensity Limitations in Compact H Cyclotrons”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper H-02, pp. 440-445.
- S. J. Park et al., “Development of S-Band Pulsed Klystron for PLS Linear Accelerator”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP16046, pp. XX-XX.
- F. Plassard, Y. Hidaka, Y. Li, T. V. Shaftan, V. V. Smaluk, and G. M. Wang, “Simultaneous Compensation of Phase and Amplitude Dependent Geometrical Resonances Using Octupoles”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1960-1963.
- J. T. Seeman, F. J. Decker, I. Hsu, and R. K. Jobe, “Multibunch Energy and Spectrum Control in the SLC High Energy Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3210-3213.
- H.-J. Kwon et al., “Beam Current and Energy Measurement of the PEFP 20 MeV Accelerator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMN056, pp. 4129-4131.
- J. Resta-L??pez, J.-L. Fernandez-Hernando, and A. Latina, “Thermo-mechanical Analysis of the CLIC Post-Linac Energy Collimators”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR030, pp. 1882-1884.
- N. A. Tahir et al., “Application of Particle Accelerators to High Energy Density Physics Research: The HEDgeHOB Collaboration”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA049, pp. 184-186.
- P. F. Beloshitsky, I. N. Meshkov, E. M. Syresin, and I. V. Titkova, “Magnet Lattice of the Synchrotron Radiation Source DELSY”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP6B05, pp. 708-710.
- A. Burrill, “Challenges in Realizing the LCLS-II Cryomodule Production”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 181-184.
- M. Miret, “Ultra Stiffness And Ultra Low Wawing LM Guide”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 48-49.
- S. Yamamoto, “Development of Very Short Period Undulators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1735-1739.
- B. X. Yang, G. Decker, P. K. Den Hartog, S.-H. Lee, and K. W. Schlax, “Progress in the Development of a Grazing-incidence Insertion Device X-ray Beam Position Monitor”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP189, pp. 441-443.
- J. Bahrdt et al., “In-Vacuum APPLE II Undulator”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4114-4116.
- J. Wlodek and K. J. Gofron, “ADUVC - an EPICS Areadetector Driver for USB Video Class Devices”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1499.
- S. Matsuzaki, M. Nishida, K. Sakaue, M. Washio, and H. Iijima, “Study of Cs-Te Photocathode for RF Electron Gun”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1632-1634.
- T. Weis, “Injection Systems for High Current Ion Accelerators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 181-186.
- E. Forton et al., “Structural and Magnetic Properties of Cast Iron for Cyclotrons”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU4PB02, pp. 275-277.
- Z. Wu, C.-Y. Liao, C. Wu, and J.-K. Liao, “Implementation of EPU56 control system at the Taiwan Photon Source”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG22, pp. 3301-3304.
- C. Gough and M. Mailand, “Septum and Kicker Systems for the SLS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH032, pp. 3741-3743.
- T. L. Allison, H. Higgins, E. Martin, W. Merz, and S. Philip, “Jefferson Lab's Trim Card II”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE065, pp. 3670-3672.
- B?Âge M., Chrin J., “A CORBA Based Client-Server Model for Beam Dynamics Applications at the SLS”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P61, pp. XX-XX.
- B. Dwersteg et al., “Structure Studies for an S-Band Linear Collider”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-71, pp. 516-518.
- A. Ganshin et al., “Temperature Waves in SRF Research”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP104, pp. 719-723.
- A. Grudiev and W. Wuensch, “Design of an X-Band Accelerating Structure for the CLIC Main Linac”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP062, pp. 933-935.
- M. Ikegami, “Progress in the Beam Commissioning of J-PARC Linac and its Upgrade Path”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MO201, pp. 16-20.
- W. Decking, V. Balandin, N. Golubeva, and F. Obier, “Fast Distribution of Pulses in Multiple Beam Line Facilities”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper WEOCI2, pp. 524-524.
- I. M. Malloch, E. S. Metzgar, L. Popielarski, and M. J. LaVere, “SRF Cavity Processing and Chemical Etching Development for the FRIB Linac”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB095, pp. 373-377.
- E. M?®tral, F. Caspers, M. Giovannozzi, A. Grudiev, T. Kroyer, and L. Sermeus, “Kicker Impedance Measurements for the Future Multi-turn Extraction of the CERN Proton Synchrotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH059, pp. 2919-2921.
- C. N. Regier, A. F. G. Leontowich, and D. M. Taylor, “Mechanical Engineering of a Cryo STXM at CLS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 381-386.
- V. V. Paramonov and K. Floettmann, “RF Test of Standing Wave Deflecting Cavity with Minimized Level of Aberrations”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 866-868.
- D. R. Douglas, G. A. Krafft, and Ph. Piot, “Study of the Energy Compression Scheme to Energy-Recover an Electron Beam in the Presence of an FEL-interaction”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B13, pp. 1543-1545.
- J. M. Mueller et al., “Large-Scale Optical Synchronization System of the European XFEL”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 253-256.
- S. Jachim et al., “Review of the complex baseband RF cavity model and its applications”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR05, unpublished.
- M. Fujita, “PRESENT STATUS OF THE K=110 MEV AVF CYCLOTRON AT TOHOKU UNIVERSITY”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P18, pp. XX-XX.
- J. Forsberg, V. H. Hardion, and D. P. Spruce, “A Graphical Tool for Viewing and Interacting with a Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 681-684.
- K. Saito and F. Furuta, “Nb/SUS Joint of Helium Vessel Base Plate for SRF Cavity Dressing”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO088, pp. 833-836.
- D. Schoerling, “Status of the ELENA Magnet System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1295-1297.
Back to search