Favourites
For Word
[n] X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 187-190. doi:10.18429/JACoW-MEDSI2016-TUPE13
[n] R. Veness et al., “Overview of beam intensity issues and mitigations in the CERN-SPS fast wire scanners”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2248-2251. doi:10.18429/JACoW-IPAC2024-WEPG26
[n] W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 640-644. doi:10.18429/JACoW-ICALEPCS2015-WED3O01
[n] L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-MEDSI2016-MOPE43
[n] F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
[n] C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
[n] R. D. Ryne, “Advanced Computing Tools and Models for Accelerator Physics”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THYM03, pp. 2947-2951.
[n] C. Qian et al., “LECR5 Development and Status Report”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 6-9. doi:10.18429/JACoW-ECRIS2020-MOWZO02
[n] M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 476-478. doi:10.18429/JACoW-IPAC2014-MOPME046
[n] G. M. Bruhaug and K. Carlson, “The Design and Construction of a Resonance Control System for the IOTA RF Cavity”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 432-434. doi:10.18429/JACoW-NAPAC2016-TUPOA74
[n] G. Dutto et al., “The Upgrading of the TRIUMF Facility to 500 muA Operation”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 326-329.
[n] S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
[n] R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2624-2626. doi:10.18429/JACoW-IPAC2015-WEPWA053
[n] P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
[n] E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-54, pp. 578-579.
[n] P. Chevtsov and V. Vrankovic, “Magnet Measurement System Upgrade at PSI”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO032, pp. 111-113.
[n] L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
[n] K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
[n] A. Ballarino, “Prospects for the use of HTS in High-field Magnets for Future Accelerator Facilities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 974-979. doi:10.18429/JACoW-IPAC2014-TUZB02
[n] B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
For LaTeX
Use Complete Form
For BibTeX
References
- X. Escaler, D. Juan Garcia, J. J. Casas, C. Colldelram, M. Prieto, and M. Quispe, “Numerical Simulation of the ALBA Synchrotron Light Source Cooling System Response to Pump Start-Up and Shut-Down”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 187-190.
- R. Veness et al., “Overview of beam intensity issues and mitigations in the CERN-SPS fast wire scanners”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG26, pp. 2248-2251.
- W. J. Goscinski et al., “MASSIVE: an HPC Collaboration to Underpin Synchrotron Science”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 640-644.
- L. Maci?â, J. J. Casas, C. Colldelram, and M. Quispe, “Hydraulic Failure Caused by Air in Pipelines of the Experimental Area Ring of ALBA Synchrotron Light Source: Research, Simulations and Solutions”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 105-107.
- F. Sakamoto et al., “Beam Generation and Acceleration Experiments of X-Band Linac and Monochromatic keV X-Ray Source of the University of Tokyo”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN032, pp. 2784-2786.
- C. G. Trahern et al., “Design of the Commissioning Software for the AGS to RHIC Transfer Line”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR20, pp. 2279-2281.
- R. D. Ryne, “Advanced Computing Tools and Models for Accelerator Physics”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THYM03, pp. 2947-2951.
- C. Qian et al., “LECR5 Development and Status Report”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOWZO02, pp. 6-9.
- M. Audrain et al., “Supervision Software for the Integration of the Beam Interlock System with the CERN Accelerator Complex”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 476-478.
- G. M. Bruhaug and K. Carlson, “The Design and Construction of a Resonance Control System for the IOTA RF Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 432-434.
- G. Dutto et al., “The Upgrading of the TRIUMF Facility to 500 muA Operation”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 326-329.
- S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
- R. B. Yoder et al., “First Acceleration in a Resonant Optical-Scale Laser-Powered Structure”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2624-2626.
- P. Savage, Y. A. Cheng, A. P. Letchford, and J. K. Pozimski, “Mechanical Design and RF Measurement on RFQ for Front-end Test Stand at RAL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH117, pp. 318-320.
- E. M. Laziev and V. M. Tsakanov, “A Few Aspects of Excitation of Wake Waves in Accelerating Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-54, pp. 578-579.
- P. Chevtsov and V. Vrankovic, “Magnet Measurement System Upgrade at PSI”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO032, pp. 111-113.
- L. Ahle et al., “Current Status of the Recirculator Project at LLNL”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP124, pp. 3248-3250.
- K. A. Brown et al., “A Scanning Target Profile Monitor for the Slow Extracted Beam at the AGS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P046, pp. 2149-2151.
- A. Ballarino, “Prospects for the use of HTS in High-field Magnets for Future Accelerator Facilities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 974-979.
- B. Jeram et al., “The Control System for the Accelerator of ANKA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02E, pp. 1691-1693.
Back to search
