Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. J. Lenci et al., “RF Sources for 3rd & 4th Generation Light Sources”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS63, pp. XX-XX.
[n] M. M. Peng et al., “Optimization of a Single-Cell Accelerating Structure for Rf Breakdown Test With Short Rf Pulses”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 747-750. doi:10.18429/JACoW-NAPAC2019-WEPLM67
[n] A. J. Gonsalves et al., “Longitudinal Density Tailoring for the Enhancement of Electron Beams in the Capillary-Discharge Laser-Guided Wakefield Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH4GBC03, pp. 3154-3156.
[n] I. L. Azhgirey, D. Bozzato, A. E. Dabrowski, I. A. Kurochkin, S. Mallows, and A. D. Riabchikova, “Physical Design of the Radiation Shielding for the CMS Experiment at LHC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2246-2248. doi:10.18429/JACoW-IPAC2021-TUPAB320
[n] W. Ebeling, “The Transverse Feedback System in DESY”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2285-2287.
[n] R. Xiang et al., “Experimental investigations and Simulations of Dark Current in ELBE SRF gun-II”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA004, unpublished.
[n] G. Westenskow, E. Halaxa, R. P. Hall, and J. Kwan, “Characterization of an RF-Driven Plasma Ion Source for Heavy Ion Fusion”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB007, pp. 3300-3302.
[n] T. T. Arkan et al., “200 MV Record Voltage of vCM and LCLS-II-HE Cryomodules Production Start Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 95-97. doi:10.18429/JACoW-LINAC2022-MOPOPA13
[n] M. Lad et al., “Commissioning and Operational Experience with INDUS-2 RF Systems”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA142, pp. 517-519.
[n] L. Reginato, “High Frequency Cascaded Resonant Transformer Rectifier Power Supply for Neutral Beam Injection”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2918-2923.
[n] T. Y. Chung, C.-H. Chang, A. Y. Chen, Y. W. Chen, J. C. Huang, and J. C. Jan, “Radiation Damage to Undulator Electronics at an Electron Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4285-4287. doi:10.18429/JACoW-IPAC2019-THPTS073
[n] G. Bassi, A. Khan, and V. Smaluk, “Bunch lengthening induced by a combination of higher-harmonic cavities of different order in low-emittance rings”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2952-2955. doi:10.18429/JACoW-IPAC2024-THBD2
[n] A. A. Vorobiev, A. N. Didenko, and A. V. Kojevnikov, “Experimental Investigation of the Influence of Quantum Fluctuations of Radiation on the Motion of Electrons in the 1.5 - Ge V Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 291-294.
[n] L. Korkeila, D. Cebra, E. Prebys, M. Backfish, and S. Hawkins, “Low energy nuclear cross section measurement facility at Crocker Nuclear Laboratory at the UC Davis”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2296-2298. doi:10.18429/JACoW-IPAC2023-TUPM043
[n] D. E. Lobb, “An Axi-Symmetric High Flux Muon Channel”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper B-16, pp. 2020-2023.
[n] G. L. Sabbi et al., “Development of Superconducting Quadrupoles for Heavy Ion Fusion”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH088, pp. 3436-3438.
[n] V. K. Bharadwaj, K. Bane, J. Clendenin, P. Emma, J. C. Sheppard, and M. D. Woodley, “Linac Design for the LCLS Project at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V040, pp. 903-905.
[n] H. Guo et al., “Study on Local Chemical Treatment for Recovery From Surface Oxidation by HPR Process on SRF Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 592-594. doi:10.18429/JACoW-SRF2017-TUPB086
[n] R. D?Âlling and M. Rohrer, “A Secondary Emission Monitor in the SINQ Beam Line for Improved Target Protection”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 334-337. doi:10.18429/JACoW-HB2018-WEP2PO032
[n] F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941.
[n] H. W. Harris, R. A. DeHaven, V. E. Hart, W. M. Parsons, and J. C. Sturrock, “Engineering, Maintenance, and New Initiatives to Improve LAMPF Beam Availability and System Reliability”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-46, pp. 737-739.
[n] J. R. Delayen, “Low Temperature Physics"”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-13, pp. -Pasadena".
[n] J. G. Alessi, M. Downer, D. McCafferty, and K. Prelec, “BNL Volume H- Source Research”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-15, pp. 335-337.
[n] R. D. Ryne, “Linac Beam Dynamics Codes: State of the Art and Perspectives”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGB03, pp. 194-194.
[n] K. D. Cromer and B. E. Norum, “A New Model of the e+e- Beam-Beam Interaction”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP01, pp. 2880-2882.
[n] A. A. Sidorin et al., “Development of Positron Annihilation Spectroscopy at the LEPTA Facility”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 499-501. doi:10.18429/JACoW-RUPAC2016-WEPSB060
[n] W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
[n] R. Gebel, R. Brings, O. Felden, R. Maier, S. Mey, and D. Prasuhn, “20 Years of JULIC Operation as COSY's Injector Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT003, pp. 34-36.
[n] D. Proch et al., “Status Report of the Petra 18-Cell Superconducting Cavity Experiment”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-16, pp. XX-XX.
[n] F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3085-3088.
[n] M. Qian, D. Haskel, D. Jensen Jr, Y. Piao, and J. Xu, “Design of an X-undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1379-1382. doi:10.18429/JACoW-IPAC2024-TUPG57
[n] A. M. Meseck, M. Abo-Bakr, and B. Kuske, “The Influence of the Seed Pulse Shape on the Output Performance of the BESSY Multi-stage HGHG-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS06, pp. XX-XX.
[n] Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
[n] G. M. A. Calvi et al., “Fast Intensity Monitor Based on Channeltron Electron Multiplier”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1873-1876. doi:10.18429/JACoW-IPAC2018-WEPAF025
[n] A. R. Donaldson and R. W. Goodwin, “A Computer-Storage Scope Display Interface”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper E-6, pp. 443-449.
[n] J. Smedley, R. S. Lefferts, A. R. Lipski, J. Sekutowicz, T. Srinivasan-Rao, and J. Warren, “Photoemission Properties of Lead”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF080, pp. 1126-1128.
[n] R. C. Pardo and P. J. Billquist, “The ECR Heavy-Ion Source for ATLAS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 319-322.
[n] J.-M. Zentler, R. D. Van Maren, and W. E. Nexsen, “Improved Focus Solenoid Design for Linear Induction Accelerators”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-52, pp. 459-461.
[n] D. K. Morris et al., “Operational Use of Ionization Profile Monitors in the Fermilab Main Injector”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP222, pp. 519-521.
[n] G. Zinkann, E. Clifft, and S. I. Sharamentov, “An Improved Pneumatic Frequency Control for Superconducting Cavities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT082, pp. 4090-4092.
[n] S. P. Mhaskar et al., “STATUS OF INDUS-1 SYNCHROTRON RADIATION SOURCE”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUAM06, pp. XX-XX.
[n] D. Angal-Kalinin et al., “Commissioning of the Indus-1 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B01, pp. 687-689.
[n] U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1132-1135.
[n] G. Lopez, “Divergent Quench Velocity Expression and 4-cm SSC R&D Dipole Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2203-2206.
[n] R. Tatchyn, “Analysis of a Novel Diffractive Scanning-Wire Beam Position Monitor (BPM) for Discriminative Profiling of Electron vs. X-Ray Beams”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P065, pp. 2192-2194.
[n] E. A. McEwen, V. Bookwalter, J. Leung, J. N. Blowers, and J. B. Szal, “Status of LCLS-II QA Systems Collaboration for Cyromodule Construction at TJNAF and FNAL”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB120, pp. 1422-1424.
[n] M. Xiao, “Measurements and Corrections of the Recycler Lattice at Fermilab”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA13, pp. 82-84.
[n] S. V. Plotnikov et al., “First Section of a 352 MHz Prototype Alvarez DTL Tank for the CERN SPL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS055, pp. 1621-1623.
[n] D. Birx et al., “The Application of Magnetic Switches as Pulse Sources for Induction Linacs”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2763-2769.
[n] D. Cook et al., “Initial Experimental Results of a New Direct Converter for High Energy Physics Applications”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS123, pp. 2661-2663.
[n] E. R. Gray and G. Spalek, “Power Coupler and Cold Window for Seven-Cell Superconducting Cavity Vertical Test”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-49, pp. 450-452.
[n] N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 346-348. doi:10.18429/JACoW-LINAC2018-TUPO011
[n] R. A. Washington, “Development of a New Timing System for ISIS”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1247-1249. doi:10.18429/JACoW-ICALEPCS2023-THMBCMO23
[n] D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. P. Verboncoeur, “Simulations of Pulse Propagation in the Laser Wakefield Accelerator using a Massively-Parallel Object-Oriented Particle in Cell Code”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B05, pp. 907-909.
[n] P. N. Ostroumov, G. Apollinari, G. W. Foster, and R. C. Webber, “Physics Design of a Multi-GeV Superconducting H-minus Linac”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBY02, pp. 134-136.
[n] Y. Shimosaki et al., “Specific Beam Dynamics in Super-bunch Acceleration”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT110, pp. 2110-2112.
[n] C. M. Fortgang, L. B. Dauelsberg, C. Geisik, D. Liska, and R. E. Shafer, “Pulsed Taut-Wire Alignment of Multiple Permanent Magnet Quadrupoles”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU444, pp. 426-428.
[n] J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 280-282. doi:10.18429/JACoW-MEDSI2018-WEPH34
[n] W. Lin et al., “AGS Booster model calibration and digital-twin development”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3449-3452. doi:10.18429/JACoW-IPAC2024-THPG78
[n] J. W. Lewellen, D. Gorelov, D. Perez, M. E. Schneider, and E. I. Simakov, “A Coupon Tester for Normal Conducting High-Gradient Materials”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1147-1150. doi:10.18429/JACoW-IPAC2021-MOPAB371
[n] T. Giacomini, P. Forck, J. G. De Villiers, J. Dietrich, and D. A. Liakin, “Ionization Profile Monitors - IPM @ GSI”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD51, pp. 419-421.
[n] A. Kruschinski et al., “Exploring the necessary conditions for steady-state microbunching at the Metrology Light Source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 464-467. doi:10.18429/JACoW-IPAC2023-MOPA176
[n] A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2898-2901.
[n] N. Gonzalez, C. Colldelram, J. B. Gonz?â, J. Juanhuix, J. Nicolas, and C. Ruget, “Compact Mirror Bender With Sub-Nanometer Adaptive Correction Control”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 371-373. doi:10.18429/JACoW-MEDSI2018-THPH16
[n] J. A. MacLachlan, F. E. Mills, and T. L. Owens, “Feed-Forward Compensation for Transient Beam Loading of the 805 MHz Debuncher for the Fermilab Linac Upgrade”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU403, pp. 303-305.
[n] T. Manegold et al., “Studies of Collision and Compression of Pulsed Plasmas Generated by Coaxial Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1653-1655. doi:10.18429/JACoW-IPAC2018-TUPML051
[n] J. F. Amundson, P. Spentzouris, and E. G. Stern, “Simulation Studies of the Interplay Between Space-Charge and Impedance Effects of the Fermilab Main Injector”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA08, pp. 69-71.
[n] G. Jackson et al., “Results from Experiments of Crystal Extraction of 900 GeV Proton Beams from the Tevatron Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR19, pp. 1945-1947.
[n] V. Le Flanchec and P. Balleyguier, “A Phased-locked S.A.M. Mode-locked Laser for the ELSA Photoinjector”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH158, pp. 3164-3166.
[n] G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 277-279. doi:10.18429/JACoW-MEDSI2018-WEPH32
[n] K. J. Suthar, G. Navrotski, A. Zholents, and P. R. Carriere, “Study of Copper Microstructure Produced by Electroforming for the 180-GHz Frequency Corrugated Waveguide”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 178. doi:10.18429/JACoW-MEDSI2020-TUPC01
[n] F. Poirier et al., “Beam Instrumentation, Challenging Tools for Demanding Projects ÔÇôÔÇô a Snapshot from the French Assigned Network”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 57-62. doi:10.18429/JACoW-HIAT2022-TU3I2
[n] R. B. Fiorito, S. E. Caldwell, S. G. Iversen, J. S. Ladish, X. K. Maruyama, and D. W. Rule, “Optical Transition Radiation Diagnostics for Low Emittance, High Energy, Charged Particle Beams”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1078-1081.
[n] S. Banna, L. Schaechter, and R. H. Siemann, “Surface Roughness Effect on a Moving Bunch”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG036, pp. 1879-1881.
[n] J. H. Li, Z. Li, and S. Zheng, “The Simulation of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 93-96. doi:10.18429/JACoW-ICAP2015-WEP14
[n] H.-D. Nuhn, E. T. Scharlemann, and R. Schlüter, “Alignment and Magnet Error Tolerances for the LCLS X-Ray FEL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA17, pp. 231-233.
[n] M. T. Heron et al., “Progress on the Implementation of the Diamond Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_018.
[n] M. P. Kelly, M. Kedzie, K. W. Shepard, and G. Zinkann, “Cold Tests of a Spoke Cavity Prototype for RIA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH117, pp. 1047-1049.
[n] J. J. Barnard et al., “Progress in Heavy Ion Driven Inertial Fusion Energy: From Scaled Experiments to the Integrated Research Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAA005, pp. 314-318.
[n] A. V. Smirnov et al., “Progress on 1.5 GHz Multi-kW CW Amplifier”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3821-3823. doi:10.18429/JACoW-IPAC2018-THPAL073
[n] S. G. Iversen, S. E. Caldwell, R. B. Fiorito, J. S. Ladish, and D. W. Rule, “Charged Particle Beam Divergence Measurements Using Transition Radiation”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 573-576.
[n] Z. Zhang, F. S. Chen, H. Geng, and B. Yin, “The Magnetic Measurement for Low Magnetic Field Stability of Dipole Magnet for CEPC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2917-2920. doi:10.18429/JACoW-IPAC2015-WEPMN003
[n] T. Wei, P. Li, Y. Li, and J. Pflueger, “Spontaneous Radiation of High-order Magnetic Field Undulator”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 146-149. doi:10.18429/JACoW-SAP2017-TUPH09
[n] P. Schmor, “Status and Plans for the TRIUMF ISAC Facility”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEZMA05, pp. 325-329.
[n] F. Belloni, D. Doria, A. Lorusso, V. Nassisi, and L. Torrisi, “Development of an Ion Source via Laser Ablation Plasma”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH139, pp. 3119-3121.
[n] M. M. Maggiore et al., “Status of SPES Facility for Acceleration of High Intensity Protons and Production of Exotic Beams”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 791-793. doi:10.18429/JACoW-IPAC2014-MOPRI079
[n] S. Takeda, “Development of New Hydrostatic Levelling Equipment for Large Next Generation Accelerator”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT113, pp. 2113-2115.
[n] A. Mondelli, K. T. Tsang, and C. Kostas, “A High-Order Moment Simulation Model”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3270-3273.
[n] E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE120, pp. 2337-2339.
[n] N. Bongers et al., “Expertsystem for COSY - Control”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1126-1129.
[n] J. E. Spencer et al., “Beam Dynamics Measurements for the SLAC Laser Acceleration Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS055, pp. 3115-3117.
[n] H. A. Hogg, G. A. Loew, and V. G. Price, “Experiments with Very High Power RF Pulses at SLAC”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3457-3460.
[n] D. Kehne, P. Letta, B. Dunham, and R. Kazimi, “Automated Startup of the CEBAF 45 MeV Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P054, pp. 2484-2486.
[n] A. Sharma, R. K. Gangwar, and B. K. Sahu, “Design and Development of a Novel Stripline Fast Faraday Cup to Measure Ion Beam Profile”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 246-249. doi:10.18429/JACoW-IBIC2020-THPP21
[n] A. Ijspeert, M. Begg, and T. M. Taylor, “Construction and Test of Superconducting Quadrupoles for the LEP2 Low-Beta Insertions”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2277-2280.
[n] Y. Xiao, “CEPC Civil Engineering Design”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 264. doi:10.18429/JACoW-eeFACT2018-WEPAB02
[n] V. Blackmore, “Recent Results from the Study of Emittance Evolution in MICE”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1699-1701. doi:10.18429/JACoW-IPAC2018-TUPML067
[n] G. Lopez, “One-Dimensional Time-independent Conduction States and Temperature Distribution Along a Normal Zone During a Quench”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2468-2471.
[n] T. Andre et al., “SEISM: 60 GHz ECR ion source for future accelerator”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2406-2408. doi:10.18429/JACoW-IPAC2023-TUPM086
[n] N. Karastathis et al., “Monitoring and Modeling of the LHC Luminosity Evolution in 2017”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 224-227. doi:10.18429/JACoW-IPAC2018-MOPMF052
[n] G. Huang et al., “High Precision RF Control for the LCLS-II”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1292-1296. doi:10.18429/JACoW-NAPAC2016-FRA2IO02
[n] J. L. Conradie, A. H. Botha, and J. G. de Villiers, “A Flat-Topping System for the NAC Separated-Sector Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-17, pp. 215-218.
[n] K. T. Tsang, D. P. Chernin, C. Kostas, A. Mondelli, and J. J. Petillo, “A High-Order Moment Simulation Model”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 312-315.
[n] L. Giannessi et al., “Future Seeding Experiments at SPARC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH024, pp. 95-97.
[n] S. Nagaitsev, C. Gattuso, S. M. Pruss, and J. T. Volk, “Experience with Magnetic Shielding of a Large Scale Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH062, pp. 3371-3373.
[n] A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 85. doi:10.18429/JACoW-MEDSI2020-MOPC14
[n] M. Huening and G. W. Foster, “Vector Sum Control of an 8 GeV Superconducting Proton Linac”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT150, pp. 1482-1484.
[n] T. Tajima, L. Civale, D. J. Devlin, G. C. Martinez, and R. K. Schulze, “Status of MgB2 Coating Studies for SRF Applications”, in Proc. SRF'13, Paris, France, Sep. 2013, paper WEIOB01, pp. 777-781.
[n] R. Bonifacio et al., “A Test of Superradiance in an FEL Experiment”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP127G, pp. 745-747.
[n] I. Hofmann, “Space Charge Resonances in High-Intensity Beams”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGA20, pp. 113-117.
[n] M. Sekiguchi et al., “A Formulation of Spiral Inflector Design and Its Application to SF Cyclotron”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXC-02, pp. 450-453.
[n] B. C. Brown et al., “Fermilab Recycler Collimation System Design”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 726-728. doi:10.18429/JACoW-NAPAC2016-WEPOA16
[n] J. D. Hepburn and W. L. Michel, “A Microprocessor-Controlled Bead Puller for RF Cavity Measurements”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B08, pp. 56-58.
For LaTeX
Use Complete Form
For BibTeX
References
- S. J. Lenci et al., “RF Sources for 3rd & 4th Generation Light Sources”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS63, pp. XX-XX.
- M. M. Peng et al., “Optimization of a Single-Cell Accelerating Structure for Rf Breakdown Test With Short Rf Pulses”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 747-750.
- A. J. Gonsalves et al., “Longitudinal Density Tailoring for the Enhancement of Electron Beams in the Capillary-Discharge Laser-Guided Wakefield Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH4GBC03, pp. 3154-3156.
- I. L. Azhgirey, D. Bozzato, A. E. Dabrowski, I. A. Kurochkin, S. Mallows, and A. D. Riabchikova, “Physical Design of the Radiation Shielding for the CMS Experiment at LHC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2246-2248.
- W. Ebeling, “The Transverse Feedback System in DESY”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2285-2287.
- R. Xiang et al., “Experimental investigations and Simulations of Dark Current in ELBE SRF gun-II”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA004, unpublished.
- G. Westenskow, E. Halaxa, R. P. Hall, and J. Kwan, “Characterization of an RF-Driven Plasma Ion Source for Heavy Ion Fusion”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB007, pp. 3300-3302.
- T. T. Arkan et al., “200 MV Record Voltage of vCM and LCLS-II-HE Cryomodules Production Start Fermilab”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 95-97.
- M. Lad et al., “Commissioning and Operational Experience with INDUS-2 RF Systems”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA142, pp. 517-519.
- L. Reginato, “High Frequency Cascaded Resonant Transformer Rectifier Power Supply for Neutral Beam Injection”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2918-2923.
- T. Y. Chung, C.-H. Chang, A. Y. Chen, Y. W. Chen, J. C. Huang, and J. C. Jan, “Radiation Damage to Undulator Electronics at an Electron Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4285-4287.
- G. Bassi, A. Khan, and V. Smaluk, “Bunch lengthening induced by a combination of higher-harmonic cavities of different order in low-emittance rings”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THBD2, pp. 2952-2955.
- A. A. Vorobiev, A. N. Didenko, and A. V. Kojevnikov, “Experimental Investigation of the Influence of Quantum Fluctuations of Radiation on the Motion of Electrons in the 1.5 - Ge V Synchrotron”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 291-294.
- L. Korkeila, D. Cebra, E. Prebys, M. Backfish, and S. Hawkins, “Low energy nuclear cross section measurement facility at Crocker Nuclear Laboratory at the UC Davis”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM043, pp. 2296-2298.
- D. E. Lobb, “An Axi-Symmetric High Flux Muon Channel”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper B-16, pp. 2020-2023.
- G. L. Sabbi et al., “Development of Superconducting Quadrupoles for Heavy Ion Fusion”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH088, pp. 3436-3438.
- V. K. Bharadwaj, K. Bane, J. Clendenin, P. Emma, J. C. Sheppard, and M. D. Woodley, “Linac Design for the LCLS Project at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V040, pp. 903-905.
- H. Guo et al., “Study on Local Chemical Treatment for Recovery From Surface Oxidation by HPR Process on SRF Cavities”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 592-594.
- R. D?Âlling and M. Rohrer, “A Secondary Emission Monitor in the SINQ Beam Line for Improved Target Protection”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 334-337.
- F. M. Bieniosek, K. Anderson, and K. Fullett, “Requirements for a Beam Sweeping System for the Fermilab Antiproton Source Target”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR17, pp. 1939-1941.
- H. W. Harris, R. A. DeHaven, V. E. Hart, W. M. Parsons, and J. C. Sturrock, “Engineering, Maintenance, and New Initiatives to Improve LAMPF Beam Availability and System Reliability”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-46, pp. 737-739.
- J. R. Delayen, “Low Temperature Physics"”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-13, pp. -Pasadena".
- J. G. Alessi, M. Downer, D. McCafferty, and K. Prelec, “BNL Volume H- Source Research”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-15, pp. 335-337.
- R. D. Ryne, “Linac Beam Dynamics Codes: State of the Art and Perspectives”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGB03, pp. 194-194.
- K. D. Cromer and B. E. Norum, “A New Model of the e+e- Beam-Beam Interaction”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP01, pp. 2880-2882.
- A. A. Sidorin et al., “Development of Positron Annihilation Spectroscopy at the LEPTA Facility”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 499-501.
- W. D. Kimura et al., “Design and Model Simulations of Inverse Cerenkov Acceleration Using Inverse Free Electron Laser Prebunching”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V013, pp. 675-677.
- R. Gebel, R. Brings, O. Felden, R. Maier, S. Mey, and D. Prasuhn, “20 Years of JULIC Operation as COSY's Injector Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT003, pp. 34-36.
- D. Proch et al., “Status Report of the Petra 18-Cell Superconducting Cavity Experiment”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-16, pp. XX-XX.
- F. Chambers et al., “Diagnostics and Data Analysis for the ETA-II Linear Induction Accelerator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3085-3088.
- M. Qian, D. Haskel, D. Jensen Jr, Y. Piao, and J. Xu, “Design of an X-undulator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG57, pp. 1379-1382.
- A. M. Meseck, M. Abo-Bakr, and B. Kuske, “The Influence of the Seed Pulse Shape on the Output Performance of the BESSY Multi-stage HGHG-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper MOPOS06, pp. XX-XX.
- Y. P. Liu et al., “Cryogenic system for BEPCII superconducting cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP19, pp. XX-XX.
- G. M. A. Calvi et al., “Fast Intensity Monitor Based on Channeltron Electron Multiplier”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1873-1876.
- A. R. Donaldson and R. W. Goodwin, “A Computer-Storage Scope Display Interface”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper E-6, pp. 443-449.
- J. Smedley, R. S. Lefferts, A. R. Lipski, J. Sekutowicz, T. Srinivasan-Rao, and J. Warren, “Photoemission Properties of Lead”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF080, pp. 1126-1128.
- R. C. Pardo and P. J. Billquist, “The ECR Heavy-Ion Source for ATLAS”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 319-322.
- J.-M. Zentler, R. D. Van Maren, and W. E. Nexsen, “Improved Focus Solenoid Design for Linear Induction Accelerators”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-52, pp. 459-461.
- D. K. Morris et al., “Operational Use of Ionization Profile Monitors in the Fermilab Main Injector”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP222, pp. 519-521.
- G. Zinkann, E. Clifft, and S. I. Sharamentov, “An Improved Pneumatic Frequency Control for Superconducting Cavities”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT082, pp. 4090-4092.
- S. P. Mhaskar et al., “STATUS OF INDUS-1 SYNCHROTRON RADIATION SOURCE”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUAM06, pp. XX-XX.
- D. Angal-Kalinin et al., “Commissioning of the Indus-1 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3B01, pp. 687-689.
- U. Bechstedt et al., “Magnets and Power Supplies for COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1132-1135.
- G. Lopez, “Divergent Quench Velocity Expression and 4-cm SSC R&D Dipole Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2203-2206.
- R. Tatchyn, “Analysis of a Novel Diffractive Scanning-Wire Beam Position Monitor (BPM) for Discriminative Profiling of Electron vs. X-Ray Beams”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P065, pp. 2192-2194.
- E. A. McEwen, V. Bookwalter, J. Leung, J. N. Blowers, and J. B. Szal, “Status of LCLS-II QA Systems Collaboration for Cyromodule Construction at TJNAF and FNAL”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB120, pp. 1422-1424.
- M. Xiao, “Measurements and Corrections of the Recycler Lattice at Fermilab”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA13, pp. 82-84.
- S. V. Plotnikov et al., “First Section of a 352 MHz Prototype Alvarez DTL Tank for the CERN SPL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS055, pp. 1621-1623.
- D. Birx et al., “The Application of Magnetic Switches as Pulse Sources for Induction Linacs”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2763-2769.
- D. Cook et al., “Initial Experimental Results of a New Direct Converter for High Energy Physics Applications”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS123, pp. 2661-2663.
- E. R. Gray and G. Spalek, “Power Coupler and Cold Window for Seven-Cell Superconducting Cavity Vertical Test”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-49, pp. 450-452.
- N. N. Alexeev et al., “Upgrade of Heavy Ion Injector I-3 at ITEP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 346-348.
- R. A. Washington, “Development of a New Timing System for ISIS”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THMBCMO23, pp. 1247-1249.
- D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. P. Verboncoeur, “Simulations of Pulse Propagation in the Laser Wakefield Accelerator using a Massively-Parallel Object-Oriented Particle in Cell Code”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B05, pp. 907-909.
- P. N. Ostroumov, G. Apollinari, G. W. Foster, and R. C. Webber, “Physics Design of a Multi-GeV Superconducting H-minus Linac”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUBY02, pp. 134-136.
- Y. Shimosaki et al., “Specific Beam Dynamics in Super-bunch Acceleration”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT110, pp. 2110-2112.
- C. M. Fortgang, L. B. Dauelsberg, C. Geisik, D. Liska, and R. E. Shafer, “Pulsed Taut-Wire Alignment of Multiple Permanent Magnet Quadrupoles”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU444, pp. 426-428.
- J. B. Yu et al., “Research on Active Vibration Isolation System”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 280-282.
- W. Lin et al., “AGS Booster model calibration and digital-twin development”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG78, pp. 3449-3452.
- J. W. Lewellen, D. Gorelov, D. Perez, M. E. Schneider, and E. I. Simakov, “A Coupon Tester for Normal Conducting High-Gradient Materials”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1147-1150.
- T. Giacomini, P. Forck, J. G. De Villiers, J. Dietrich, and D. A. Liakin, “Ionization Profile Monitors - IPM @ GSI”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD51, pp. 419-421.
- A. Kruschinski et al., “Exploring the necessary conditions for steady-state microbunching at the Metrology Light Source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA176, pp. 464-467.
- A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2898-2901.
- N. Gonzalez, C. Colldelram, J. B. Gonz?â, J. Juanhuix, J. Nicolas, and C. Ruget, “Compact Mirror Bender With Sub-Nanometer Adaptive Correction Control”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 371-373.
- J. A. MacLachlan, F. E. Mills, and T. L. Owens, “Feed-Forward Compensation for Transient Beam Loading of the 805 MHz Debuncher for the Fermilab Linac Upgrade”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU403, pp. 303-305.
- T. Manegold et al., “Studies of Collision and Compression of Pulsed Plasmas Generated by Coaxial Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1653-1655.
- J. F. Amundson, P. Spentzouris, and E. G. Stern, “Simulation Studies of the Interplay Between Space-Charge and Impedance Effects of the Fermilab Main Injector”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA08, pp. 69-71.
- G. Jackson et al., “Results from Experiments of Crystal Extraction of 900 GeV Proton Beams from the Tevatron Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR19, pp. 1945-1947.
- V. Le Flanchec and P. Balleyguier, “A Phased-locked S.A.M. Mode-locked Laser for the ELSA Photoinjector”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH158, pp. 3164-3166.
- G. Y. Wang, L. Kang, J. B. Yu, J. S. Zhang, and J. X. Chen, “DESIGN OF A LAYERED HIGH PRECISION MAGNET GIRDER”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 277-279.
- K. J. Suthar, G. Navrotski, A. Zholents, and P. R. Carriere, “Study of Copper Microstructure Produced by Electroforming for the 180-GHz Frequency Corrugated Waveguide”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 178.
- F. Poirier et al., “Beam Instrumentation, Challenging Tools for Demanding Projects ÔÇôÔÇô a Snapshot from the French Assigned Network”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 57-62.
- R. B. Fiorito, S. E. Caldwell, S. G. Iversen, J. S. Ladish, X. K. Maruyama, and D. W. Rule, “Optical Transition Radiation Diagnostics for Low Emittance, High Energy, Charged Particle Beams”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1078-1081.
- S. Banna, L. Schaechter, and R. H. Siemann, “Surface Roughness Effect on a Moving Bunch”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG036, pp. 1879-1881.
- J. H. Li, Z. Li, and S. Zheng, “The Simulation of the Room Temperature Cross-bar H Type Drift Tube Linac”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 93-96.
- H.-D. Nuhn, E. T. Scharlemann, and R. Schlüter, “Alignment and Magnet Error Tolerances for the LCLS X-Ray FEL”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA17, pp. 231-233.
- M. T. Heron et al., “Progress on the Implementation of the Diamond Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_018.
- M. P. Kelly, M. Kedzie, K. W. Shepard, and G. Zinkann, “Cold Tests of a Spoke Cavity Prototype for RIA”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH117, pp. 1047-1049.
- J. J. Barnard et al., “Progress in Heavy Ion Driven Inertial Fusion Energy: From Scaled Experiments to the Integrated Research Experiment”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOAA005, pp. 314-318.
- A. V. Smirnov et al., “Progress on 1.5 GHz Multi-kW CW Amplifier”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3821-3823.
- S. G. Iversen, S. E. Caldwell, R. B. Fiorito, J. S. Ladish, and D. W. Rule, “Charged Particle Beam Divergence Measurements Using Transition Radiation”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 573-576.
- Z. Zhang, F. S. Chen, H. Geng, and B. Yin, “The Magnetic Measurement for Low Magnetic Field Stability of Dipole Magnet for CEPC”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2917-2920.
- T. Wei, P. Li, Y. Li, and J. Pflueger, “Spontaneous Radiation of High-order Magnetic Field Undulator”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 146-149.
- P. Schmor, “Status and Plans for the TRIUMF ISAC Facility”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEZMA05, pp. 325-329.
- F. Belloni, D. Doria, A. Lorusso, V. Nassisi, and L. Torrisi, “Development of an Ion Source via Laser Ablation Plasma”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH139, pp. 3119-3121.
- M. M. Maggiore et al., “Status of SPES Facility for Acceleration of High Intensity Protons and Production of Exotic Beams”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 791-793.
- S. Takeda, “Development of New Hydrostatic Levelling Equipment for Large Next Generation Accelerator”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT113, pp. 2113-2115.
- A. Mondelli, K. T. Tsang, and C. Kostas, “A High-Order Moment Simulation Model”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3270-3273.
- E. Wright et al., “Development of a 10-MW, L-Band, Multiple-Beam Klystron for TESLA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE120, pp. 2337-2339.
- N. Bongers et al., “Expertsystem for COSY - Control”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1126-1129.
- J. E. Spencer et al., “Beam Dynamics Measurements for the SLAC Laser Acceleration Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS055, pp. 3115-3117.
- H. A. Hogg, G. A. Loew, and V. G. Price, “Experiments with Very High Power RF Pulses at SLAC”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3457-3460.
- D. Kehne, P. Letta, B. Dunham, and R. Kazimi, “Automated Startup of the CEBAF 45 MeV Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P054, pp. 2484-2486.
- A. Sharma, R. K. Gangwar, and B. K. Sahu, “Design and Development of a Novel Stripline Fast Faraday Cup to Measure Ion Beam Profile”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 246-249.
- A. Ijspeert, M. Begg, and T. M. Taylor, “Construction and Test of Superconducting Quadrupoles for the LEP2 Low-Beta Insertions”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2277-2280.
- Y. Xiao, “CEPC Civil Engineering Design”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 264.
- V. Blackmore, “Recent Results from the Study of Emittance Evolution in MICE”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1699-1701.
- G. Lopez, “One-Dimensional Time-independent Conduction States and Temperature Distribution Along a Normal Zone During a Quench”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2468-2471.
- T. Andre et al., “SEISM: 60 GHz ECR ion source for future accelerator”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM086, pp. 2406-2408.
- N. Karastathis et al., “Monitoring and Modeling of the LHC Luminosity Evolution in 2017”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 224-227.
- G. Huang et al., “High Precision RF Control for the LCLS-II”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1292-1296.
- J. L. Conradie, A. H. Botha, and J. G. de Villiers, “A Flat-Topping System for the NAC Separated-Sector Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-17, pp. 215-218.
- K. T. Tsang, D. P. Chernin, C. Kostas, A. Mondelli, and J. J. Petillo, “A High-Order Moment Simulation Model”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 312-315.
- L. Giannessi et al., “Future Seeding Experiments at SPARC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH024, pp. 95-97.
- S. Nagaitsev, C. Gattuso, S. M. Pruss, and J. T. Volk, “Experience with Magnetic Shielding of a Large Scale Accelerator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH062, pp. 3371-3373.
- A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 85.
- M. Huening and G. W. Foster, “Vector Sum Control of an 8 GeV Superconducting Proton Linac”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT150, pp. 1482-1484.
- T. Tajima, L. Civale, D. J. Devlin, G. C. Martinez, and R. K. Schulze, “Status of MgB2 Coating Studies for SRF Applications”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper WEIOB01, pp. 777-781.
- R. Bonifacio et al., “A Test of Superradiance in an FEL Experiment”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP127G, pp. 745-747.
- I. Hofmann, “Space Charge Resonances in High-Intensity Beams”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGA20, pp. 113-117.
- M. Sekiguchi et al., “A Formulation of Spiral Inflector Design and Its Application to SF Cyclotron”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXC-02, pp. 450-453.
- B. C. Brown et al., “Fermilab Recycler Collimation System Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 726-728.
- J. D. Hepburn and W. L. Michel, “A Microprocessor-Controlled Bead Puller for RF Cavity Measurements”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B08, pp. 56-58.
Back to search