Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
[n] N. J. Diserens, “Progress in the Development of a 3D Finite Element Computer Program to Calculate Space and Image Charge Effects in RF Quadrupoles”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2501-2504.
[n] G. Rumolo, J. B. Jeanneret, Y. Papaphilippou, and D. Quatraro, “Collective Effects in the CLIC Damping Rings”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP049, pp. 658-660.
[n] E. N. Schmierer et al., “Design of the Spoke Cavity EDD Input Coupler”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT013, pp. XX-XX.
[n] A. C. Caruso et al., “The LEBT Chopper for the Spiral 2 Project”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS082, pp. 1731-1733.
[n] P. vom Stein, K. Dunkel, B. Griep, C. Piel, and H. P. Vogel, “Series Fabrication Technologies for Normalconducting Linac and Storage Ring Cavities”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF007, pp. 968-969.
[n] R. J. Sachtschale, C. Dickey, and P. Morcombe, “A Novel Technique for Pulsing Magnet Strings with a Single Switch”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1339-1342.
[n] R. T. Westervelt, W. B. Klein, and G. Luger, “Framework for a General Purpose, Intelligent Control System for Particle Accelerators”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAE08, pp. 2175-2177.
[n] S. L. Kramer, R. Konecny, J. Simpson, and A. J. Wright, “Filters for Stochastic Cooling of Longitudinal Beam Emittance”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3651-3654.
[n] W. Fischer, M. Blaskiewicz, R. Calaga, P. Cameron, Y. Luo, and T. Pieloni, “Transverse Beam Transfer Functions of Colliding Beams in RHIC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS094, pp. 1856-1858.
[n] M. Tajima, T. Koseki, T. Nakaya, and T. Toyama, “Development of 16 Electrodes Beam-size Monitors for J-PARC MR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 347-350. doi:10.18429/JACoW-IBIC2019-TUPP021
[n] L. Liu, R. H. A. Farias, X. R. Resende, and P. F. Tavares, “Beam Based Calibration of the LNLS UVX Storage Ring BPMs”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP011, pp. 3717-3719.
[n] X. R. Resende and P. F. Tavares, “Estimation of Transverse Coupling From Pinhole Images”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH004, pp. 1921-1923.
[n] P. Maccioni, K. C. D. Chan, J. Kuzminski, and R. Gentzlinger, “Industrial Fabrication of Medium-Beta SCRF Cavities for a High-Intensity Proton Linac”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD06, pp. 914-916.
[n] S. Blanchard et al., “The Linac4 Vacuum Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1494-1497. doi:10.18429/JACoW-ICALEPCS2017-THPHA056
[n] J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
[n] R. J. Roussel et al., “Probing Multiperiod Plasma Response Regimes using Single Shot Wakefield Measurements”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 878-881. doi:10.18429/JACoW-NAPAC2019-WEPLO19
[n] A. Kadnikov, V. Deviatilov, V. Korchuganov, Yu. Matveev, and D. Shvedov, “High Voltage Nanosecond Generators for SIBERIA - 2”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAA18, pp. 1266-1268.
[n] D. P. Gurd, D. R. Heywood, and R. R. Johnson, “The Use of CAMAC with Small Computers in the TRIUMF Control System”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper H-08, pp. 561-564.
[n] H. Frese, G. Hochweller, W. Krechlok, and R. Schmitz, “FPSS-A Fast Packet Switching System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2377-2380.
[n] J. R. Piton et al., “Control and Diagnostic Systems for the LNLS 500-MeV Booster Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH025, pp. 822-824.
[n] W. Fischer, J. W. Glenn, W. W. MacKay, V. Ptitsin, T. G. Robinson, and N. Tsoupas, “The RHIC Injection System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP21, pp. 702-704.
[n] L. Ristori et al., “Development and Performance of 325 MHz Single Spoke Resonators for Project X”, in Proc. SRF'13, Paris, France, Sep. 2013, paper FRIOB02, pp. 1187-1192.
[n] M. Patecki et al., “Towards Ultra-Low * in ATF2”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 38-41. doi:10.18429/JACoW-IPAC2015-MOBC1
[n] H. von Jagwitz-Biegnitz, P. Beasley, O. Heid, T. Kluge, D. C. Faircloth, and R. G. Selway, “Automated Conditioning System for Siemens Novel Electrostatic Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3825-3827. doi:10.18429/JACoW-IPAC2014-THPRI027
[n] X. Liu et al., “A C-band test platform for the development of RF photo cathode and high gradient accelerating structures”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1995-1998. doi:10.18429/JACoW-IPAC2023-TUPL112
[n] F. Marti and P. S. Miller, “Magnetic Field Imperfections in the K500 Superconducting Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B25, pp. 107-110.
[n] J. G. Hwang and T. K. Yang, “Development of Large Aperture Faraday-Cup for LEBT of KHIMA.”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 241-243. doi:10.18429/JACoW-IPAC2016-MOPMR009
[n] N. Mounet et al., “Measurements and Simulations of Transverse Coupled-Bunch Instability Rise Times in the LHC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR069, pp. 3087-3089.
[n] O. N. Borisov et al., “Beam Extraction System From Dc60 Cyclotron”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 24-26.
[n] S. O. Schriber, “Present Status of RFQs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3134-3139.
[n] E. Acerbi et al., “Model Magnet for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1109-1112.
[n] S. H. Kim, C. L. Doose, K. Kim, R. Hogrefe, L. R. Turner, and R. Merl, “Magnetic Measurement Data of the Injector Synchrotron Dipole Magnets for the 7-GeV Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2799-2802.
[n] R. van de Water, “Accelerator Searches for Axions and Dark Matter”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper FRCDE1, unpublished.
[n] J. C. Huang, K.-B. Liu, and Y. S. Wong, “Zero Voltage Switching of Two-switch Flyback-Forward Converter”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD063, pp. 3656-3658.
[n] H. Maesaka, T. Ohshima, Y. Otake, and S. Matsubara, “Design and Performance of the Optical Fiber Length Stabilization System for SACLA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1906-1908. doi:10.18429/JACoW-IPAC2014-WEOBB01
For LaTeX
Use Complete Form
For BibTeX
References
- R. L. Cassel and M. N. Nguyen, “A Unique Power Supply for the PEP-II Klystron at SLAC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P014, pp. 3482-3484.
- N. J. Diserens, “Progress in the Development of a 3D Finite Element Computer Program to Calculate Space and Image Charge Effects in RF Quadrupoles”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2501-2504.
- G. Rumolo, J. B. Jeanneret, Y. Papaphilippou, and D. Quatraro, “Collective Effects in the CLIC Damping Rings”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP049, pp. 658-660.
- E. N. Schmierer et al., “Design of the Spoke Cavity EDD Input Coupler”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT013, pp. XX-XX.
- A. C. Caruso et al., “The LEBT Chopper for the Spiral 2 Project”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS082, pp. 1731-1733.
- P. vom Stein, K. Dunkel, B. Griep, C. Piel, and H. P. Vogel, “Series Fabrication Technologies for Normalconducting Linac and Storage Ring Cavities”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF007, pp. 968-969.
- R. J. Sachtschale, C. Dickey, and P. Morcombe, “A Novel Technique for Pulsing Magnet Strings with a Single Switch”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1339-1342.
- R. T. Westervelt, W. B. Klein, and G. Luger, “Framework for a General Purpose, Intelligent Control System for Particle Accelerators”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAE08, pp. 2175-2177.
- S. L. Kramer, R. Konecny, J. Simpson, and A. J. Wright, “Filters for Stochastic Cooling of Longitudinal Beam Emittance”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3651-3654.
- W. Fischer, M. Blaskiewicz, R. Calaga, P. Cameron, Y. Luo, and T. Pieloni, “Transverse Beam Transfer Functions of Colliding Beams in RHIC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS094, pp. 1856-1858.
- M. Tajima, T. Koseki, T. Nakaya, and T. Toyama, “Development of 16 Electrodes Beam-size Monitors for J-PARC MR”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 347-350.
- L. Liu, R. H. A. Farias, X. R. Resende, and P. F. Tavares, “Beam Based Calibration of the LNLS UVX Storage Ring BPMs”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP011, pp. 3717-3719.
- X. R. Resende and P. F. Tavares, “Estimation of Transverse Coupling From Pinhole Images”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH004, pp. 1921-1923.
- P. Maccioni, K. C. D. Chan, J. Kuzminski, and R. Gentzlinger, “Industrial Fabrication of Medium-Beta SCRF Cavities for a High-Intensity Proton Linac”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THD06, pp. 914-916.
- S. Blanchard et al., “The Linac4 Vacuum Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1494-1497.
- J. Kewisch, V. Ptitsin, J. Rose, and J. Wei, “RHIC Longitudinal Parameter Revision”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP12C, pp. 377-379.
- R. J. Roussel et al., “Probing Multiperiod Plasma Response Regimes using Single Shot Wakefield Measurements”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 878-881.
- A. Kadnikov, V. Deviatilov, V. Korchuganov, Yu. Matveev, and D. Shvedov, “High Voltage Nanosecond Generators for SIBERIA - 2”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAA18, pp. 1266-1268.
- D. P. Gurd, D. R. Heywood, and R. R. Johnson, “The Use of CAMAC with Small Computers in the TRIUMF Control System”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper H-08, pp. 561-564.
- H. Frese, G. Hochweller, W. Krechlok, and R. Schmitz, “FPSS-A Fast Packet Switching System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2377-2380.
- J. R. Piton et al., “Control and Diagnostic Systems for the LNLS 500-MeV Booster Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH025, pp. 822-824.
- W. Fischer, J. W. Glenn, W. W. MacKay, V. Ptitsin, T. G. Robinson, and N. Tsoupas, “The RHIC Injection System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP21, pp. 702-704.
- L. Ristori et al., “Development and Performance of 325 MHz Single Spoke Resonators for Project X”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper FRIOB02, pp. 1187-1192.
- M. Patecki et al., “Towards Ultra-Low * in ATF2”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 38-41.
- H. von Jagwitz-Biegnitz, P. Beasley, O. Heid, T. Kluge, D. C. Faircloth, and R. G. Selway, “Automated Conditioning System for Siemens Novel Electrostatic Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3825-3827.
- X. Liu et al., “A C-band test platform for the development of RF photo cathode and high gradient accelerating structures”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL112, pp. 1995-1998.
- F. Marti and P. S. Miller, “Magnetic Field Imperfections in the K500 Superconducting Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B25, pp. 107-110.
- J. G. Hwang and T. K. Yang, “Development of Large Aperture Faraday-Cup for LEBT of KHIMA.”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 241-243.
- N. Mounet et al., “Measurements and Simulations of Transverse Coupled-Bunch Instability Rise Times in the LHC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR069, pp. 3087-3089.
- O. N. Borisov et al., “Beam Extraction System From Dc60 Cyclotron”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 24-26.
- S. O. Schriber, “Present Status of RFQs”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3134-3139.
- E. Acerbi et al., “Model Magnet for the Proposed Superconducting Cyclotron at the University of Milan”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1109-1112.
- S. H. Kim, C. L. Doose, K. Kim, R. Hogrefe, L. R. Turner, and R. Merl, “Magnetic Measurement Data of the Injector Synchrotron Dipole Magnets for the 7-GeV Advanced Photon Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2799-2802.
- R. van de Water, “Accelerator Searches for Axions and Dark Matter”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper FRCDE1, unpublished.
- J. C. Huang, K.-B. Liu, and Y. S. Wong, “Zero Voltage Switching of Two-switch Flyback-Forward Converter”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD063, pp. 3656-3658.
- H. Maesaka, T. Ohshima, Y. Otake, and S. Matsubara, “Design and Performance of the Optical Fiber Length Stabilization System for SACLA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1906-1908.
Back to search