Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Fallahi et al., “Complete Simulation of Laser Induced Field Emission from Nanostructures Using a DGTD, PIC and FEM Code”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 645-648. doi:10.18429/JACoW-IPAC2014-MOPRI026
[n] B. Parker et al., “The Superconducting Magnets of the ILC Beam Delivery System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS091, pp. 3196-3198.
[n] P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1070-1072. doi:10.18429/JACoW-ICALEPCS2015-WEPGF155
[n] L. Picardi et al., “Experimental Results on SCDTL Structures for Protons”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3247-3249. doi:10.18429/JACoW-IPAC2014-THPME016
[n] F. Bordry, J.-P. Burnet, and F. Voelker, “CERN-PS Main Power Converter Renovation: How To Provide and Control the Large Flow of Energy for a Rapid Cycling Machine?”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE063, pp. 3612-3614.
[n] A. Friedman, D. A. Callahan, D. P. Grote, I. Haber, and A. B. Langdon, “3d and r, z Particle Simulation of Beams for Heavy Ion Fusion: The WARP Code”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 263-266.
[n] D. Choe, M. Chung, S. Y. Kim, S. G. Arutunian, A. V. Margaryan, and E. G. Lazareva, “Beam Halo Measurements using Vibrating Wire at the KOMAC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 680-682. doi:10.18429/JACoW-IPAC2016-MOPOR037
[n] S. Kawata, A. Manabe, and H. Watanabe, “Cross-Field Acceleration by Electromagnetic Wave”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 703-706.
[n] R. Li, S. Q. Tan, W. F. Wu, and R. N. Xu, “A High-Performance Digital Controller based on Ethernet Interface for Accelerator Power Supply”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 501-503. doi:10.18429/JACoW-IPAC2014-MOPME057
[n] J. S. Lunsford, R. F. Bentley, and G. P. Lawrence, “Versatile H Beam Chopper System at LAMPF”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3433-3436.
[n] A. Guerrero, J. J. Gras, J-L. Nougaret, M. Ludwig, M. Arruat, and S. Jackson, “CERN Front-End Software Architecture for Accelerator Controls”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE612, pp. XX-XX.
[n] Tadashi Koseki, Masaaki Izawa, Kenji Shinoe, Shuichi Tokumoto, Yukihide Kamiya, Toshi Miura, Kiyokazu Satoh, “High Power Test of the Damped RF-Cavity”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P042, pp. 3066-3068.
[n] L. Zang and T. Kamitani, “SuperKEKB Positron Source Target Protection Scheme”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI017, pp. 315-317.
[n] V. V. Paramonov, L. V. Kravchuk, and V. A. Puntus, “The Cold Model of the CDS Structure”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4077, pp. 579-581.
[n] G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2512-2514. doi:10.18429/JACoW-IPAC2015-WEPWA012
[n] W. Lu et al., “DRAGON: a New 18 GHz RT ECR Ion Source with a Large Plasma Chamber”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT011, pp. 58-60.
[n] R. M. Talman, “Predominantly Electric Storage Ring with Nuclear Spin Control Capability”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 338-343. doi:10.18429/JACoW-HB2023-THA1I3
[n] V. Bykovskiy et al., “POSITRON SOURCE FOR THE LEPTA PROJECT”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP16, pp. XX-XX.
[n] M. Raskovic, H. L. Phillips, S. Popovic, J. Upadhyay, A-M. Valente-Feliciano, and L. Vuskovic, “Plasma Etching Rates and Surface Composition of Bulk Nb Treated in Ar/Cl2 Microwave Discharge”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP161, pp. 928-930.
[n] R. C. York et al., “The NSCL Coupled Cyclotron Project - Overview and Status”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper K-01, pp. 687-691.
[n] E. Karantzoulis et al., “Observation of Instabilities in the ELETTRA Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 119-122.
[n] A. Halavanau et al., “Status of cavity-based X-ray free electron laser project at SLAC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPG44, unpublished.
[n] T. C. Zhao et al., “The Beam Instruments for HIMM@IMP”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 33-35. doi:10.18429/JACoW-IBIC2018-MOPA04
[n] A. Facco et al., “The Matching Line Between the RFQ and the IH Linac of the CERN Lead Ion Facility”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-15, pp. 731-733.
[n] J. Corbett, A. Garren, C. Limborg, and Y. Nosochkov, “Design of the SPEAR 3 Magnet Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP46G, pp. 574-576.
[n] S. Bernal et al., “Resonance Phenomena over a Broad Range of Beam Intensities in an Electron Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP059, pp. 4443-4445.
[n] O. S. Melnychuk et al., “Vertical Cavity Test Facility at Fermilab”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB004, pp. 534-538.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Fallahi et al., “Complete Simulation of Laser Induced Field Emission from Nanostructures Using a DGTD, PIC and FEM Code”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 645-648.
- B. Parker et al., “The Superconducting Magnets of the ILC Beam Delivery System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS091, pp. 3196-3198.
- P. Charrue, M. Buttner, F. Ehm, and P. Jurcso, “Improving Software Services Through Diagnostic and Monitoring Capabilities”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1070-1072.
- L. Picardi et al., “Experimental Results on SCDTL Structures for Protons”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3247-3249.
- F. Bordry, J.-P. Burnet, and F. Voelker, “CERN-PS Main Power Converter Renovation: How To Provide and Control the Large Flow of Energy for a Rapid Cycling Machine?”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE063, pp. 3612-3614.
- A. Friedman, D. A. Callahan, D. P. Grote, I. Haber, and A. B. Langdon, “3d and r, z Particle Simulation of Beams for Heavy Ion Fusion: The WARP Code”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 263-266.
- D. Choe, M. Chung, S. Y. Kim, S. G. Arutunian, A. V. Margaryan, and E. G. Lazareva, “Beam Halo Measurements using Vibrating Wire at the KOMAC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 680-682.
- S. Kawata, A. Manabe, and H. Watanabe, “Cross-Field Acceleration by Electromagnetic Wave”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 703-706.
- R. Li, S. Q. Tan, W. F. Wu, and R. N. Xu, “A High-Performance Digital Controller based on Ethernet Interface for Accelerator Power Supply”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 501-503.
- J. S. Lunsford, R. F. Bentley, and G. P. Lawrence, “Versatile H Beam Chopper System at LAMPF”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3433-3436.
- A. Guerrero, J. J. Gras, J-L. Nougaret, M. Ludwig, M. Arruat, and S. Jackson, “CERN Front-End Software Architecture for Accelerator Controls”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WE612, pp. XX-XX.
- Tadashi Koseki, Masaaki Izawa, Kenji Shinoe, Shuichi Tokumoto, Yukihide Kamiya, Toshi Miura, Kiyokazu Satoh, “High Power Test of the Damped RF-Cavity”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P042, pp. 3066-3068.
- L. Zang and T. Kamitani, “SuperKEKB Positron Source Target Protection Scheme”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI017, pp. 315-317.
- V. V. Paramonov, L. V. Kravchuk, and V. A. Puntus, “The Cold Model of the CDS Structure”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4077, pp. 579-581.
- G. Torrisi et al., “Design of a Microwave Frequency Sweep Interferometer for Plasma Density Measurements in ECR Ion Sources”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2512-2514.
- W. Lu et al., “DRAGON: a New 18 GHz RT ECR Ion Source with a Large Plasma Chamber”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT011, pp. 58-60.
- R. M. Talman, “Predominantly Electric Storage Ring with Nuclear Spin Control Capability”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THA1I3, pp. 338-343.
- V. Bykovskiy et al., “POSITRON SOURCE FOR THE LEPTA PROJECT”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUIP16, pp. XX-XX.
- M. Raskovic, H. L. Phillips, S. Popovic, J. Upadhyay, A-M. Valente-Feliciano, and L. Vuskovic, “Plasma Etching Rates and Surface Composition of Bulk Nb Treated in Ar/Cl2 Microwave Discharge”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP161, pp. 928-930.
- R. C. York et al., “The NSCL Coupled Cyclotron Project - Overview and Status”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper K-01, pp. 687-691.
- E. Karantzoulis et al., “Observation of Instabilities in the ELETTRA Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 119-122.
- A. Halavanau et al., “Status of cavity-based X-ray free electron laser project at SLAC”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG44, unpublished.
- T. C. Zhao et al., “The Beam Instruments for HIMM@IMP”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 33-35.
- A. Facco et al., “The Matching Line Between the RFQ and the IH Linac of the CERN Lead Ion Facility”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-15, pp. 731-733.
- J. Corbett, A. Garren, C. Limborg, and Y. Nosochkov, “Design of the SPEAR 3 Magnet Lattice”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP46G, pp. 574-576.
- S. Bernal et al., “Resonance Phenomena over a Broad Range of Beam Intensities in an Electron Storage Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP059, pp. 4443-4445.
- O. S. Melnychuk et al., “Vertical Cavity Test Facility at Fermilab”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB004, pp. 534-538.
Back to search