Favourites
For Word
[n] N. Solyak et al., “Testing of PIP-II Pre-production 650 MHz Couplers in Warm Test Stand and Cryomodule”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 812-815. doi:10.18429/JACoW-SRF2023-WEPWB096
[n] S. Doebert, “The Proton Driven Advanced Wake Field Acceleration Experiment (AWAKE) at CERN”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 642-646. doi:10.18429/JACoW-LINAC2018-TH1A04
[n] E. Allaria et al., “FERMI Configuration for the Echo Enabled Harmonic Generation Experiment”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1752-1755. doi:10.18429/JACoW-IPAC2019-TUPRB031
[n] R. Chehab, G. Le Meur, B. Mouton, and M. Renard, “An Adiabatic Matching Device for the Orsay Linear Positron Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2850-2853.
[n] B. Bertrand and A. Harrisson, “Building and Packaging EPICS Modules With Conda”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 222. doi:10.18429/JACoW-ICALEPCS2019-MOPHA014
[n] Y. Liu, J. Su, and Z. Sun, “Investigation of transverse narrow-band impedance by coupled-bunch instability measurement in circular accelerator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3148-3150. doi:10.18429/JACoW-IPAC2024-THPC59
[n] R. S. Lord and E. D. Hudson, “Magnet for an 800 - MeV Separated Orbit Cyclotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 373-377.
[n] L. Bartelson and J. Walton, “Pulsed Power Supplies for the Fermilab 1 TeV Switchyard”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3755-3757.
[n] S. Doebert, “Ultra-Short Bunch Electron Injector for Awake”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 770-772. doi:10.18429/JACoW-LINAC2016-THOP11
[n] L. R. Doolittle, “Strategies for Waveguide Coupling for SRF Cavities”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4080, pp. 246-248.
[n] A. Ratti et al., “Prototype Models for the SNS RFQ”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4084, pp. 600-602.
[n] W. Barry, P. Kloeppel, and R. Rossmanith, “Technique of Measuring Bunch Length by Phasing an RF Cavity”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH447, pp. 719-720.
[n] N. Simos, H. G. Kirk, H. Ludewig, P. Thieberger, and K. T. McDonald, “Thermodynamic Interaction of the Primary Proton Beam with a Mercury Jet Target at a Neutrino Factory Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH076, pp. 3018-3020.
[n] J. A. Clarke, “The Magnetic Design of a High Field Permanent Magnet Multipole Wiggler for the SRS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P023, pp. 3503-3505.
[n] S. Kurz and S. Russenschuck, “Accurate Calculation of Magnetic Fields in the End Regions of Superconducting Accelerator Magnets Using the BEM-FEM Coupling Method”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA89, pp. 2796-2798.
[n] J. Bengtsson, D. Briggs, and M. Meddahi, “Six-Dimensional Modeling of Coherent Bunch Instabilities and Related Feedback Systems in Storage Rings with Power-Series Maps for the Lattice”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1084-1087.
[n] N. Simos et al., “Material Irradiation Damage Studies for High Power Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS133, pp. 1816-1818.
[n] E. Weihreter et al., “Simulation of Fundamental Mode Evanescent Fields in a HOM Damping Waveguide and Comparison with Measurements”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE085, pp. 2199-2201.
[n] H. Grote, “Beam Threading in the LHC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP05B, pp. 1277-1279.
[n] E. Kazanci et al., “Current Status of TARLA Control System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3192-3194. doi:10.18429/JACoW-IPAC2014-THPRO127
[n] H. Aoyagi, Y. Furukawa, and S. Takahashi, “Evaluation and Reduction of Influence of Filling Pattern on X-Ray Beam Position Monitors for SPring-8”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2526-2528. doi:10.18429/JACoW-IPAC2019-WEPGW027
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Insights into Formation of Nb3Sn Film During the Vapor Diffusion Process”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 539-542. doi:10.18429/JACoW-SRF2017-TUPB067
For LaTeX
Use Complete Form
For BibTeX
References
- N. Solyak et al., “Testing of PIP-II Pre-production 650 MHz Couplers in Warm Test Stand and Cryomodule”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper WEPWB096, pp. 812-815.
- S. Doebert, “The Proton Driven Advanced Wake Field Acceleration Experiment (AWAKE) at CERN”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 642-646.
- E. Allaria et al., “FERMI Configuration for the Echo Enabled Harmonic Generation Experiment”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1752-1755.
- R. Chehab, G. Le Meur, B. Mouton, and M. Renard, “An Adiabatic Matching Device for the Orsay Linear Positron Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2850-2853.
- B. Bertrand and A. Harrisson, “Building and Packaging EPICS Modules With Conda”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 222.
- Y. Liu, J. Su, and Z. Sun, “Investigation of transverse narrow-band impedance by coupled-bunch instability measurement in circular accelerator”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC59, pp. 3148-3150.
- R. S. Lord and E. D. Hudson, “Magnet for an 800 - MeV Separated Orbit Cyclotron”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 373-377.
- L. Bartelson and J. Walton, “Pulsed Power Supplies for the Fermilab 1 TeV Switchyard”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3755-3757.
- S. Doebert, “Ultra-Short Bunch Electron Injector for Awake”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 770-772.
- L. R. Doolittle, “Strategies for Waveguide Coupling for SRF Cavities”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4080, pp. 246-248.
- A. Ratti et al., “Prototype Models for the SNS RFQ”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4084, pp. 600-602.
- W. Barry, P. Kloeppel, and R. Rossmanith, “Technique of Measuring Bunch Length by Phasing an RF Cavity”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH447, pp. 719-720.
- N. Simos, H. G. Kirk, H. Ludewig, P. Thieberger, and K. T. McDonald, “Thermodynamic Interaction of the Primary Proton Beam with a Mercury Jet Target at a Neutrino Factory Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH076, pp. 3018-3020.
- J. A. Clarke, “The Magnetic Design of a High Field Permanent Magnet Multipole Wiggler for the SRS”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P023, pp. 3503-3505.
- S. Kurz and S. Russenschuck, “Accurate Calculation of Magnetic Fields in the End Regions of Superconducting Accelerator Magnets Using the BEM-FEM Coupling Method”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA89, pp. 2796-2798.
- J. Bengtsson, D. Briggs, and M. Meddahi, “Six-Dimensional Modeling of Coherent Bunch Instabilities and Related Feedback Systems in Storage Rings with Power-Series Maps for the Lattice”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1084-1087.
- N. Simos et al., “Material Irradiation Damage Studies for High Power Accelerators”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS133, pp. 1816-1818.
- E. Weihreter et al., “Simulation of Fundamental Mode Evanescent Fields in a HOM Damping Waveguide and Comparison with Measurements”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE085, pp. 2199-2201.
- H. Grote, “Beam Threading in the LHC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP05B, pp. 1277-1279.
- E. Kazanci et al., “Current Status of TARLA Control System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3192-3194.
- H. Aoyagi, Y. Furukawa, and S. Takahashi, “Evaluation and Reduction of Influence of Filling Pattern on X-Ray Beam Position Monitors for SPring-8”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2526-2528.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, C. E. Reece, and J. Tuggle, “Insights into Formation of Nb3Sn Film During the Vapor Diffusion Process”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 539-542.
Back to search