Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. E. J??rgensen et al., “High-Energy Scraper System for the S-DALINAC Extraction Beam Line - Commissioning Run”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 75-77. doi:10.18429/JACoW-IBIC2018-MOPB03
[n] A. Burrill et al., “Multipacting Analysis of a Quarter Wave Choke Joint used for Insertion of a Demountable Cathode into a SRF Photoinjector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS089, pp. 2544-2546.
[n] H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
[n] Jines P., Craft B., “The GNU Control System at CAMD: Part Two”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper WC1P37, pp. XX-XX.
[n] C. Zhang, M. Heilmann, H. Podlech, and C. Will, “Development of a 704.4 MHz CH cavity using additive manufacturing”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1744-1746. doi:10.18429/JACoW-IPAC2023-TUPA185
[n] C. Friedrichs, J. Lyles, and J. M. Doub, “Development of a High Speed Crowbar for LANSCE”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P011, pp. 3473-3475.
[n] D. Winder, “The path to high beam power targets”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEZN2, unpublished.
[n] M. Parise, J. Bernardini, and D. Passarelli, “Beamline Volume Relief Analysis for the PIP-II SSR2 Cryomodule at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 519-522. doi:10.18429/JACoW-LINAC2022-TUPOGE14
[n] T. Zhang, X. Guan, and B. Cui, “A New Project of Cyclotron Base Radioactive Ion Beam Facility”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUA201, pp. XX-XX.
[n] T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
[n] T. W. Koeth, “Beam Physics Demonstrations with the Rutgers 12-Inch Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper WEPPT025, pp. 369-371.
[n] M. Pont, “Booster of the ALBA Synchrotron Light Source: Pre-commissioning experiences”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD069, pp. 3257-3259.
[n] S. W. Lee, M. S. Champion, and Y. W. Kang, “Consideration on Determination of Coupling Factors of Waveguide Iris Couplers”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 229-231. doi:10.18429/JACoW-NAPAC2016-MOPOB71
[n] C. Giloux, A. Hilaire, A. Ijspeert, F. Rodriguez-Mateos, R. Schmidt, and F. Sonnemann, “Protection of the Superconducting Corrector Magnets for the LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A08, pp. 2163-2165.
[n] L. Ducimeti re, G. H. Schroeder, J. Uythoven, and E. Vossenberg, “Upgrading of the SPS Injection Kicker System for LHC Requirements”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP20H, pp. 2275-2277.
[n] J. D. Gilpatrick et al., “Operation of the Position Measurements for the Isotope Production Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT152, pp. 2813-2815.
[n] Z. J. Wang et al., “The Status of CiADS Superconducting LINAC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 994-997. doi:10.18429/JACoW-IPAC2019-MOPTS059
[n] W. J. Corbett, W. X. Cheng, A. S. Fisher, E. Irish, T. M. Mitsuhashi, and W. Y. Mok, “Interferometer Beam Size Measurements in SPEAR3”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP033, pp. 4018-4020.
For LaTeX
Use Complete Form
For BibTeX
References
- L. E. J??rgensen et al., “High-Energy Scraper System for the S-DALINAC Extraction Beam Line - Commissioning Run”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 75-77.
- A. Burrill et al., “Multipacting Analysis of a Quarter Wave Choke Joint used for Insertion of a Demountable Cathode into a SRF Photoinjector”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS089, pp. 2544-2546.
- H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
- Jines P., Craft B., “The GNU Control System at CAMD: Part Two”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper WC1P37, pp. XX-XX.
- C. Zhang, M. Heilmann, H. Podlech, and C. Will, “Development of a 704.4 MHz CH cavity using additive manufacturing”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA185, pp. 1744-1746.
- C. Friedrichs, J. Lyles, and J. M. Doub, “Development of a High Speed Crowbar for LANSCE”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P011, pp. 3473-3475.
- D. Winder, “The path to high beam power targets”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEZN2, unpublished.
- M. Parise, J. Bernardini, and D. Passarelli, “Beamline Volume Relief Analysis for the PIP-II SSR2 Cryomodule at Fermilab”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 519-522.
- T. Zhang, X. Guan, and B. Cui, “A New Project of Cyclotron Base Radioactive Ion Beam Facility”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUA201, pp. XX-XX.
- T. Takayanagi et al., “Experimental Results of the Shift Bump Magnet in the J-PARC 3-GeV RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS111, pp. 1762-1764.
- T. W. Koeth, “Beam Physics Demonstrations with the Rutgers 12-Inch Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper WEPPT025, pp. 369-371.
- M. Pont, “Booster of the ALBA Synchrotron Light Source: Pre-commissioning experiences”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD069, pp. 3257-3259.
- S. W. Lee, M. S. Champion, and Y. W. Kang, “Consideration on Determination of Coupling Factors of Waveguide Iris Couplers”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 229-231.
- C. Giloux, A. Hilaire, A. Ijspeert, F. Rodriguez-Mateos, R. Schmidt, and F. Sonnemann, “Protection of the Superconducting Corrector Magnets for the LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A08, pp. 2163-2165.
- L. Ducimeti re, G. H. Schroeder, J. Uythoven, and E. Vossenberg, “Upgrading of the SPS Injection Kicker System for LHC Requirements”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP20H, pp. 2275-2277.
- J. D. Gilpatrick et al., “Operation of the Position Measurements for the Isotope Production Facility”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT152, pp. 2813-2815.
- Z. J. Wang et al., “The Status of CiADS Superconducting LINAC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 994-997.
- W. J. Corbett, W. X. Cheng, A. S. Fisher, E. Irish, T. M. Mitsuhashi, and W. Y. Mok, “Interferometer Beam Size Measurements in SPEAR3”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP033, pp. 4018-4020.
Back to search