JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	A. Rubini, S. Nellaga, J. D. Gonzalez Cobas, T. Wlostowski, and F. Vaga, “ZIO: The Ultimate Linux I/O Framework”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOMIB09, pp. 77-80. 
[n]	R. Salemme et al., “First Beam Test of Laser Engineered Surface Structures (LESS) at Cryogenic Temperature in CERN SPS Accelerator”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2616-2619. doi:10.18429/JACoW-IPAC2018-WEPMG005
[n]	S. C. Duarte Pinto and J. Spanggaard, “Gas Electron Multipliers Versus Multi Wire Proportional Chambers”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUCL3, pp. 342-345. 
[n]	D. Darvas, E. Blanco Vinuela, and I. Majzik, “A Formal Specification Method for PLC-based Applications”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 907-910. doi:10.18429/JACoW-ICALEPCS2015-WEPGF091
[n]	A. Valishev, G. Annala, V. A. Lebedev, and R. S. Moore, “Correction of Second Order Chromaticity at Tevatron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS015, pp. 3922-3924. 
[n]	R. P. Fliller et al., “Application of Machine Learning to Minimize Long Term Drifts in the NSLS-II Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1867-1869. doi:10.18429/JACoW-IPAC2018-WEPAF022
[n]	S. Littleton, D. Dowell, F. Zhou, and A. Fisher, “Dark current in the LCLS Injector: characterization and mitigation strategies”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2148-2150. doi:10.18429/JACoW-IPAC2024-WEPC75
[n]	M. Di Giacomo, “Design and Manufacturing Tools for RF Resonators at GANIL”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-06, pp. 175-178. 
[n]	J. P. Koutchouk and J. Poole, “Data Management for LEP Control”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 683-686. 
[n]	E. Matias et al., “CLS: A Fully Open-Source Control System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPA002, pp. 136-139. 
[n]	M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1707-1710. 
[n]	P. Mandrillon, F. Anton, F. Farley, N. Fietier, R. Savoy, and J. Y. Tang, “A Compact Facility for High Energy Proton Terapy based on a Superconducting Cyclotron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2604-2607. 
[n]	S. J. Gessner, E. Adli, F.-J. Decker, M. J. Hogan, T. O. Raubenheimer, and A. Scheinker, “Longitudinal Phase Space Dynamics with Novel Diagnostic Techniques at FACET”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA069, pp. 1865-1867. 
[n]	E. Matias et al., “ScienceStudio: A Project Status Update”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP105, pp. 880-882. 
[n]	G. T. Danby and J. W. Jackson, “Theory, Design and Measurement of the Brookhaven Narrow Quadrupoles”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 414-420. 
[n]	K. Batchelor, J. Galayda, and R. Hawrylak, “R.F. Cavity Design for the NSLS”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2839-2842. 
[n]	H. O. Moser and B. Krevet, “Emittance and Dynamic Aperture in Compact Storage Rings with Superconducting Bending Magnets”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 794-797. 
[n]	D. Winklehner, J. Y. Benitez, D. Leitner, M. M. Strohmeier, D. S. Todd, and D. P. Grote, “Plasma-to-Target WARP Simulations of Uranium Beams Extracted from VENUS Compared to Emittance Measurements and Beam Images”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUCOAK03, pp. 81-83. 
[n]	R. Modic, G. Pajor, K. Zagar, L. Medeiros-Romao, R. Salemme, and D. Vandeplassche, “Control System Design Considerations for MYRRHA ADS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3162-3164. doi:10.18429/JACoW-IPAC2014-THPRO115
[n]	P. A. P. Nghiem, D. Uriot, B. Dalena, J. Dumas, and N. Pichoff, “Strategy of Beam Tuning Implementation for the SARAF MEBT and SC Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 652-654. doi:10.18429/JACoW-IPAC2017-MOPIK057
[n]	A. V. Shemyakin, A. V. Burov, K. Carlson, L. R. Prost, M. Sutherland, and A. Warner, “Optimization of Electron Cooling in the Recycler”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP076, pp. 1466-1468. 
[n]	N. F. Ziegler, “Test Results from Coaxial Cavities for Separted-Orbit Cyclotrons”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 482-487. 
[n]	P. I. Reinhardt-Nickoulin, A. Feschenko, S. A. Gavrilov, and I. V. Vasilyev, “Distortions of Proton Beam 2-D Images and Profiles due to Beam Space Charge”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper TUPSA034, pp. 116-118. 
[n]	U. Knopf, K. D. Nowakowski, O. Peters, and S. Wolff, “Results of Field Measurements for PETRA Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3925-3928. 
[n]	G. Portmann and D. Robin, “Beam Based Alignment Of C-Shaped Quadrupole Magnets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP45C, pp. 620-622. 
[n]	F. Varela, U. Epting, M. Gonzalez Corral, E. Mandilara, and S. Podgorski, “MARS: Easing Maintenance and Interventions for CERN Controls”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1748-1752. doi:10.18429/JACoW-ICALEPCS2017-THPHA151
[n]	J. Strait et al., “Methods to Detect Faulty Splices in the Superconducting Magnet System of the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP049, pp. 247-249. 
[n]	E. Matias, “Friday Closeout Presentation”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper FRTA01, pp. 219-219. 
[n]	R. Althaus et al., “Performance of Dipole Magnets in Helium II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3280-3283. 
[n]	D. Cocq et al., “First Beam Tests for the Prototype LHC Orbit and Trajectory System in the CERN-SPS”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM17, pp. XX-XX. 
[n]	J. Keane et al., “Bunch Lengthening Control Using the Fourth Harmonic Cavity in the VUV Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 138-141. 
[n]	C. H. Rode, R. A. Andrews, A. W. Maschke, and R. M. Mobley, “Design of the 500 GeV Slow Extracted Beam and Proton Beam Lines”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 984-989. 
[n]	B. Copy, O. O. Andreassen, Ph. Gayet, M. Labrenz, H. Milcent, and F. Piccinelli, “Scalable Web Broadcasting for Historical Industrial Control Data”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 790-793. doi:10.18429/JACoW-ICALEPCS2015-WEPGF042
[n]	Ju. Wang and J. Volk, “Design and Simulation of Fast Pulsed Kicker/Bumper Units for the Positron Accumulator Ring at APS”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2706-2709. 
[n]	C. K. Park et al., “The KOMAC Project: Accelerator and Transmutation Project in Korea”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5A003, pp. 319-322. 
[n]	S. Werin et al., “Commissioning of the Test FEL at MAX-lab”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper FRAAU06, pp. 556-559. 
[n]	M. Minestrini, “Preliminary Results on Niobium Sputtered Films inside Tesla Type Cavities”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP24, pp. 110-112. 
[n]	R. Saban et al., “The LHC Test String: First Operational Experience”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEO07A, pp. 358-360. 
[n]	K. Whitham, “Design of a 3 Ampere Peak Steady State  0.001 Duty, 10 - MeV Linear Electron Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 307-312. 
[n]	G. A. Loew et al., “High-Gradient Studies on 11.4 GHz Copper Accelerator Structures”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-39, pp. 716-718. 
[n]	L. V. Kravchuk, A. Feschenko, M. I. Grachev, and V. L. Serov, “Multipurpose Research Complex Based on the INR High Intensity Proton Linac”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEYCH02, pp. 90-94. 
[n]	O. Calvo, C. Sibley, and T. Russ, “High Stability Switching Mode Power Converters for Magnet Loads”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU466, pp. 493-495. 
[n]	K. M. Wilson et al., “Production of Copper-Plated Beamline Bellows and Spools for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1167-1169. doi:10.18429/JACoW-IPAC2017-MOPVA132
[n]	A. Feschenko, V. Gaidash, and S. A. Gavrilov, “Development and Implementation of Bunch Shape Instrumentation for Ion Linacs”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 1-6. doi:10.18429/JACoW-RuPAC2021-MOX02
[n]	V. A. Puntus and G. V. Romanov, “Multipactoring in  the Beam  Phase Monitor at MMF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05D, pp. 1583-1585. 
[n]	J. Borer, A. Hofmann, J.-P. Koutchouk, T. Risselada, and B. Zotter, “Measurements of Betatron Phase Advance and Beta Function in the ISR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2406-2409. 
[n]	F. Bordry and H. Thiesen, “LHC Inner Triplet Powering Strategy”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROPB012, pp. 633-635. 
[n]	D. Fernandez-Carreiras et al., “Alba, A Tango Based Control System in Python”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP016, pp. 709-711. 
[n]	A. Rai et al., “Completion of the Superconducting Heavy Ion Linac at Inter-University Accelerator Centre”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP012, pp. 103-105. 
[n]	F. M. Esser et al., “Development Work for a Short Curved Superconducting Dipole Magnet for the HESR at FAIR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD011, pp. 2425-2427. 
[n]	M. Gourber-Pace, G. Kruk, and M. Misiowiec, “Status Report of the Measurement Service for the CERN Accelerator Logging”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP106, pp. 325-327. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search