Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. W. Kang et al., “Status and Performance of ORNL Spallation Neutron Source Accelerator Systems”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1007-1009. doi:10.18429/JACoW-IPAC2016-TUOAA02
[n] M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 703-707.
[n] G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
[n] K. Visser and H. W. Mostert, “Vacuum Control Systems at the NAC Cyclotrons”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-06, pp. 426-427.
[n] M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
[n] F. Nolden, D. Boehne, G. Berthes, B. Franzke, and A. Schwinn, “Stochastic Precooling of Neavy Fragments in the ESR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 579-582.
[n] R. Cimino and F. Sch?ñfers, “Soft X-ray Reflectivity and Photoelectron Yield of Technical Materials: Experimental Input for Instability Simulations in High Intensity Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2335-2337. doi:10.18429/JACoW-IPAC2014-WEPME034
[n] A. Harvey and R. D. Turner, “The LAMPF Switchyard Magnets”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 892-894.
[n] M. K?Ârfer, W. G?Âttmann, J. Kuhnhenn, and F. Wulf, “Beam Loss Position Monitor Using Cerenkov Radiation in Optical Fibers”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW026, pp. 301-303.
[n] N. Tsoupas et al., “Design of a Thin Quadrupole to be Used in the AGS Synchrotron”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS103, pp. 3723-3725.
[n] K. F. Johnson et al., “Commissioning of the Low-Energy Demonstration Accelerator (LEDA) Radio-Frequency Quadrupole (RFQ)”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA62, pp. 3528-3530.
[n] P. Chu et al., “SNS Application Programming Infrastructure and Physics Applications”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_076.
[n] D. Gonnella, J. J. Kaufman, P. N. Koufalis, and M. Liepe, “RF Losses from Trapped Flux in SRF Cavities”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2327-2330. doi:10.18429/JACoW-IPAC2016-WEPMR026
[n] V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 689-692. doi:10.18429/JACoW-ICALEPCS2015-WEPGF001
[n] I. Rodriguez, F. J. Bermejo, J. L. Munoz, and D. de Cos, “Calculation, Design and Manufacturing of a Resistive Quadrupole for the ESS-Bilbao Transfer Lines”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO012, pp. 2418-2420.
[n] R. W. Garnett, T. S. Bhatia, G. H. Neuschaefer, and J. M. Watson, “A Comparison of Beam-Dynamics Solutions for the SSC 1284-MHz Coupled Cavity Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU415, pp. 341-343.
[n] S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724.
[n] R. A. Erickson, E. Guerra, M. Stanek, Z. Van Hoover, and J. Warren, “A New Control Room for SLAC Accelerators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR029, pp. 4029-4031.
[n] Ju. Bylinsky, S. Esin, A. Feschenko, P. Ostroumov, and S. Zharylkapov, “Experiments Connected with Tuning of the Drift Tube Cavities Stabilized with Post Couplers”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-45, pp. 158-160.
[n] G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244.
[n] R. Bandelmann et al., “Nb Prototype of the Superstructure for the TESLA Linear Collider”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP029, pp. 490-493.
[n] M. Rehak, J. Bengtsson, G. Danby, J. W. Jackson, J. Skaritka, and C. J. Spataro, “Design of the NSLS II High Order Multipole Correctors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP006, pp. 139-141.
[n] H. Wiedemann, “The Slac-Linac-Collider (SLC) Project”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2016-2020.
[n] M. Bassetti, O. Ferrando, and F. Iazzourene, “ELETTRA Booster Synchrotron Lattice”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B13, pp. 631-633.
[n] H. Kim, G. H. MacKenzie, W. B. Powell, and P. J. Waterton, “Operation of the Regenerative Extraction System on the University of Birmingham 40 - Inch Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63B04, pp. XX-XX.
[n] C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3728-3731.
[n] A. Zaltsman et al., “Progress in the Development of High Level RF for the SNS Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB007, pp. 1195-1197.
[n] N. F. Ziegler, “Control System for the Holifield Heavy Ion Research Facility Beam Buncher”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3304-3307.
[n] A. Harvey, “Tailored Vacuum Chambers for AC Magnets”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3815-3818.
[n] J. A. Martin et al., “A Proposed National Heavy-Ion Accelerator at Oak Ridge”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 54-63.
[n] D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1437-1440.
[n] Q. L. Zhang, B. C. Jiang, S. Q. Tian, W. Z. Zhang, and Z. T. Zhao, “Effects Estimation of Superconducting Wiggler in SSRF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO033, pp. 1946-1948.
[n] A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
[n] J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
[n] P. Wang et al., “Status Report on the Duke FEL Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH325, pp. 2819-2820.
[n] D. L. Judd and R. S. Livingston, “Closing Remarks”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper Z-001, pp. XX-XX.
[n] G. Danby et al., “Design and Measurement of the NSLS II Correctors”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP009, pp. 148-150.
[n] J. L. Bol et al., “High Intensity H Cyclotrons for Radioisotope Production”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-03, pp. 149-151.
[n] A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1659-1662.
[n] P. Cameron et al., “Tune Feedback at RHIC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH032, pp. 1294-1296.
[n] S. K. Esin, T. N. Habibullin, L. V. Kravchuk, V. V. Peplov, V. A. Puntus, and G. V. Romanov, “Adjustment of Meson Factory Linac 991-MHz Accelerating System”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 506-509.
[n] J. Bahrdt et al., “Cherenkov Fibers for Beam Diagnostics at the Metrology Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP029, pp. 1159-1161.
[n] B. B. Baricevic et al., “Evaluation of the Analog and Digital Receiver Section in the Libera LLRF System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP086, pp. 2210-2212.
[n] M. Dubois et al., “Permanent Magnets Under Irradiation and Radioactive Alkali Ion Beam Development for SPIRAL I”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-15, pp. 102-105.
[n] D. Hardy, J. Tang, R. Legg, M. Tiefenback, M. Crofford, and G. A. Krafft, “Automated Path Length and M$_{56}$ Measurements at Jefferson Lab”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P070, pp. 2265-2267.
[n] G. Danby and J. Jackson, “Vacuum Chamber EDDY Current Correction Coil for the AGS Booster”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1035-1038.
[n] R. S. Livingston, “Survey of Operating Sector-Focused Cyclotrons”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63A01, pp. XX-XX.
[n] S. Magyary et al., “Operating Experience with a New Accelerator Control System Based upon Microprocessors”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2201-2204.
[n] F. R. Osswald, E. Bouquerel, D. Boutin, W. Beeckman, and J. L. Lancelot, “Optimization of Quadripolar Field Production for Electrostatic Ion Beam Focusing”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2468-2470. doi:10.18429/JACoW-IPAC2014-WEPME080
[n] A. Ratti, J. M. Brennan, J. Brodowski, E. Onillon, and J. Rose, “The RHIC Accelerating Cavity Prototype Tuner”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ17, pp. 2705-2707.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. W. Kang et al., “Status and Performance of ORNL Spallation Neutron Source Accelerator Systems”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1007-1009.
- M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 703-707.
- G. Portmann, C. Steier, and A. Young, “Commissioning of the First Elliptically Polarizing Undulator at the ALS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP2A04, pp. 2343-2345.
- K. Visser and H. W. Mostert, “Vacuum Control Systems at the NAC Cyclotrons”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-06, pp. 426-427.
- M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
- F. Nolden, D. Boehne, G. Berthes, B. Franzke, and A. Schwinn, “Stochastic Precooling of Neavy Fragments in the ESR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 579-582.
- R. Cimino and F. Sch?ñfers, “Soft X-ray Reflectivity and Photoelectron Yield of Technical Materials: Experimental Input for Instability Simulations in High Intensity Accelerators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2335-2337.
- A. Harvey and R. D. Turner, “The LAMPF Switchyard Magnets”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 892-894.
- M. K?Ârfer, W. G?Âttmann, J. Kuhnhenn, and F. Wulf, “Beam Loss Position Monitor Using Cerenkov Radiation in Optical Fibers”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POW026, pp. 301-303.
- N. Tsoupas et al., “Design of a Thin Quadrupole to be Used in the AGS Synchrotron”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS103, pp. 3723-3725.
- K. F. Johnson et al., “Commissioning of the Low-Energy Demonstration Accelerator (LEDA) Radio-Frequency Quadrupole (RFQ)”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA62, pp. 3528-3530.
- P. Chu et al., “SNS Application Programming Infrastructure and Physics Applications”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P3_076.
- D. Gonnella, J. J. Kaufman, P. N. Koufalis, and M. Liepe, “RF Losses from Trapped Flux in SRF Cavities”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2327-2330.
- V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 689-692.
- I. Rodriguez, F. J. Bermejo, J. L. Munoz, and D. de Cos, “Calculation, Design and Manufacturing of a Resistive Quadrupole for the ESS-Bilbao Transfer Lines”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO012, pp. 2418-2420.
- R. W. Garnett, T. S. Bhatia, G. H. Neuschaefer, and J. M. Watson, “A Comparison of Beam-Dynamics Solutions for the SSC 1284-MHz Coupled Cavity Linac”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU415, pp. 341-343.
- S. Banna et al., “Scaling Laws of a Dielectric Optical Accelerator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAB006, pp. 722-724.
- R. A. Erickson, E. Guerra, M. Stanek, Z. Van Hoover, and J. Warren, “A New Control Room for SLAC Accelerators”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR029, pp. 4029-4031.
- Ju. Bylinsky, S. Esin, A. Feschenko, P. Ostroumov, and S. Zharylkapov, “Experiments Connected with Tuning of the Drift Tube Cavities Stabilized with Post Couplers”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-45, pp. 158-160.
- G. I. Cancelo, E. James, and S. A. Wolbers, “Digital Signal Processing the Tevatron BPM Signals”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT011, pp. 1242-1244.
- R. Bandelmann et al., “Nb Prototype of the Superstructure for the TESLA Linear Collider”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP029, pp. 490-493.
- M. Rehak, J. Bengtsson, G. Danby, J. W. Jackson, J. Skaritka, and C. J. Spataro, “Design of the NSLS II High Order Multipole Correctors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP006, pp. 139-141.
- H. Wiedemann, “The Slac-Linac-Collider (SLC) Project”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2016-2020.
- M. Bassetti, O. Ferrando, and F. Iazzourene, “ELETTRA Booster Synchrotron Lattice”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B13, pp. 631-633.
- H. Kim, G. H. MacKenzie, W. B. Powell, and P. J. Waterton, “Operation of the Regenerative Extraction System on the University of Birmingham 40 - Inch Cyclotron”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63B04, pp. XX-XX.
- C. Peters et al., “Design and Performance of 40mm, 6.5 T, Collared, Cold-Iron Model Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3728-3731.
- A. Zaltsman et al., “Progress in the Development of High Level RF for the SNS Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB007, pp. 1195-1197.
- N. F. Ziegler, “Control System for the Holifield Heavy Ion Research Facility Beam Buncher”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3304-3307.
- A. Harvey, “Tailored Vacuum Chambers for AC Magnets”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3815-3818.
- J. A. Martin et al., “A Proposed National Heavy-Ion Accelerator at Oak Ridge”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 54-63.
- D. Nguyen, M. Lee, R. Sass, and H. Shoaee, “Accelerator and Feedback Control Simulation Using Neural Networks”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1437-1440.
- Q. L. Zhang, B. C. Jiang, S. Q. Tian, W. Z. Zhang, and Z. T. Zhao, “Effects Estimation of Superconducting Wiggler in SSRF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO033, pp. 1946-1948.
- A. H. Jaffey, R. Benaroya, and T. K. Khoe, “A Hybrid Superconducting Solenoid as a Focusing Element in a Superconducting Heavy-Ion Accelerator”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B08, pp. 102-105.
- J. J. Pon, K. S. Lee, M. Mouat, P. J. Yogendran, and B. Davison, “Overview of The Scans" in the Central Control System of TRIUMF's 500 MeV Cyclotron"”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC001, pp. 1090-1093.
- P. Wang et al., “Status Report on the Duke FEL Facility”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH325, pp. 2819-2820.
- D. L. Judd and R. S. Livingston, “Closing Remarks”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper Z-001, pp. XX-XX.
- G. Danby et al., “Design and Measurement of the NSLS II Correctors”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP009, pp. 148-150.
- J. L. Bol et al., “High Intensity H Cyclotrons for Radioisotope Production”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper E-03, pp. 149-151.
- A. M. Hutton et al., “Status of the SLC Damping Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1659-1662.
- P. Cameron et al., “Tune Feedback at RHIC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH032, pp. 1294-1296.
- S. K. Esin, T. N. Habibullin, L. V. Kravchuk, V. V. Peplov, V. A. Puntus, and G. V. Romanov, “Adjustment of Meson Factory Linac 991-MHz Accelerating System”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 506-509.
- J. Bahrdt et al., “Cherenkov Fibers for Beam Diagnostics at the Metrology Light Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP029, pp. 1159-1161.
- B. B. Baricevic et al., “Evaluation of the Analog and Digital Receiver Section in the Libera LLRF System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP086, pp. 2210-2212.
- M. Dubois et al., “Permanent Magnets Under Irradiation and Radioactive Alkali Ion Beam Development for SPIRAL I”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-15, pp. 102-105.
- D. Hardy, J. Tang, R. Legg, M. Tiefenback, M. Crofford, and G. A. Krafft, “Automated Path Length and M$_{56}$ Measurements at Jefferson Lab”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P070, pp. 2265-2267.
- G. Danby and J. Jackson, “Vacuum Chamber EDDY Current Correction Coil for the AGS Booster”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1035-1038.
- R. S. Livingston, “Survey of Operating Sector-Focused Cyclotrons”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63A01, pp. XX-XX.
- S. Magyary et al., “Operating Experience with a New Accelerator Control System Based upon Microprocessors”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2201-2204.
- F. R. Osswald, E. Bouquerel, D. Boutin, W. Beeckman, and J. L. Lancelot, “Optimization of Quadripolar Field Production for Electrostatic Ion Beam Focusing”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2468-2470.
- A. Ratti, J. M. Brennan, J. Brodowski, E. Onillon, and J. Rose, “The RHIC Accelerating Cavity Prototype Tuner”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ17, pp. 2705-2707.
Back to search