Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Sanchez Barrueta, G. O. Bolme, J. T. M. Lyles, R. Z. Pinsky, and J. E. Zane, “X-Ray Detector Array for Spatial and Temporal Diagnostic at the LANSCE Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 47-50. doi:10.18429/JACoW-NAPAC2019-MOYBB6
[n] Y. Shiroyanagi et al., “Thermal Modeling of the Prototype Superconducting Undulator (SCU0)”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC07, pp. 1151-1153.
[n] T. Satogata, J. Cardona, V. Ptitsyn, S. Tepikian, and J. van Zeijts, “Linear Optics during the RHIC 2001-2 Run”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE049, pp. 1187-1189.
[n] A. C. Mezger, “caQtDM, an EPICS Display Manager Based on Qt”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC121, pp. 864-866.
[n] B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1046-1048.
[n] J. P. Rigla, S. Ferrer, Yu. A. Kubyshin, A. V. Poseryaev, and V. I. Shvedunov, “Compact Design of Race-track Microtron Magnets”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC159, pp. 2380-2382.
[n] H. Mizuno, Y. Kobayashi, T. Majima, and S. Sakamoto, “A Blumlein Type Modulator for a 100 MW-class X-band Klystron”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2538-2541.
[n] V. V. Danilov et al., “The Concept of Round Colliding Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007L, pp. 1149-1151.
[n] D. Bulfone, M. Lonza, P. Michelini, and L. Pasquali, “The Design of the Energy Ramping System for ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1809-1812.
[n] C. Thiebaux et al., “Development of a Transparent Profiler Based on Secondary Electrons Emission for Charged Particle Beams”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 302-304. doi:10.18429/JACoW-CYCLOTRONS2019-THB04
[n] R. Amirikas, A. Bertolini, J. Eschke, B. Faatz, and M. Lomperski, “Vibration Stability Studies of a Type III+ XFEL/FLASH Superconducting Accelerating Module Operating at 2K”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH078, pp. 421-424.
[n] F. Gougnaud, Y. Lussignol, J. F. Denis, F. Gohier, and T. J. Joannem, “CEA Irfu EPICS Environment for the SARAF-LINAC Project”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1335-1339. doi:10.18429/JACoW-ICALEPCS2017-THPHA001
[n] K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished.
[n] M. Patecki, A. Mereghetti, D. Mirarchi, and S. Redaelli, “Conceptual Design of a Collimation System for the CERN Super Proton Synchrotron”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 802-805. doi:10.18429/JACoW-IPAC2018-TUPAF046
[n] H. Danared, A. Källberg, K.-G. Rensfelt, and A. Simonsson, “Observations of Ordered Ion Beams in CRYRING”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH165, pp. 2038-2040.
[n] T. K. Charles, D. M. Paganin, M. J. Boland, and R. T. Dowd, “Beam by Design: Current Pulse Shaping Through Longitudinal Dispersion Control”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 644-647. doi:10.18429/JACoW-IPAC2017-MOPIK055
[n] J. C. McNeur, J. B. Rosenzweig, G. Travish, J. Zhou, and R. B. Yoder, “Resonance, Particle Stability, and Acceleration in the Micro-Accelerator Platform”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP010, pp. 121-123.
[n] K. H. Kim et al., “Development of Pattern Awareness Unit (PAU) for the LCLS Beam Based Fast Feedback System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN032, pp. 954-957.
[n] T. Masuda, T. Fukui, T. Kudo, T. Ohata, and R. T. Tanaka, “Evaluation and Improvement of PoE-based Temperature Measurement Module”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP018, pp. 207-209.
[n] M. Pezzetti, H. Coppier, and D. O. Tavares, “Advanced Control Facility for the Cern-Unicos Framework”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP060, pp. 516-518.
[n] N. Yamamoto et al., “Study of the Coherent Terahertz Radiation by Laser Bunch Slicing at UVSOR-II Electron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA037, pp. 2570-2572.
[n] Y. K. Batygin, C. Pillai, and L. Rybarcyk, “Space-charge Effects in H- Low-energy Beam Transport of LANSCE”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS5, pp. 64-66.
[n] G. D'Auria, “Application of X-band Linacs”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper WE1A03, pp. 724-728.
[n] H. Zheng, H. Cao, and Y. X. Chen, “Design of PLC Temperature Flow Acquisition System Based on EPICS”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 109-110. doi:10.18429/JACoW-PCaPAC2018-WEP31
[n] B. P. Bielawski, F. Locci, and S. Magnoni, “CLIC-ACM: Acquisition and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOBB06, pp. 1404-1407.
[n] A. Miura, “Progress of Beam Instumentation in J-PARC Linac”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOIA02, pp. XX-XX.
[n] E. Bjorklund, “Replacing the Engine in Your Car While You Are Still Driving It”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1131-1133. doi:10.18429/JACoW-ICALEPCS2015-THHC2O03
[n] G. De Ninno, A. Antoniazzi, B. Diviacco, D. Fanelli, R. Meucci, and M. Trovo, “Stabilization of the Elettra Storage-Ring Free-Electron Laser using a Derivative Feedback”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP007, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Sanchez Barrueta, G. O. Bolme, J. T. M. Lyles, R. Z. Pinsky, and J. E. Zane, “X-Ray Detector Array for Spatial and Temporal Diagnostic at the LANSCE Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 47-50.
- Y. Shiroyanagi et al., “Thermal Modeling of the Prototype Superconducting Undulator (SCU0)”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPAC07, pp. 1151-1153.
- T. Satogata, J. Cardona, V. Ptitsyn, S. Tepikian, and J. van Zeijts, “Linear Optics during the RHIC 2001-2 Run”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE049, pp. 1187-1189.
- A. C. Mezger, “caQtDM, an EPICS Display Manager Based on Qt”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC121, pp. 864-866.
- B. Rusnak et al., “Superconducting Cavity Development at Los Alamos National Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1046-1048.
- J. P. Rigla, S. Ferrer, Yu. A. Kubyshin, A. V. Poseryaev, and V. I. Shvedunov, “Compact Design of Race-track Microtron Magnets”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC159, pp. 2380-2382.
- H. Mizuno, Y. Kobayashi, T. Majima, and S. Sakamoto, “A Blumlein Type Modulator for a 100 MW-class X-band Klystron”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2538-2541.
- V. V. Danilov et al., “The Concept of Round Colliding Beams”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP007L, pp. 1149-1151.
- D. Bulfone, M. Lonza, P. Michelini, and L. Pasquali, “The Design of the Energy Ramping System for ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1809-1812.
- C. Thiebaux et al., “Development of a Transparent Profiler Based on Secondary Electrons Emission for Charged Particle Beams”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 302-304.
- R. Amirikas, A. Bertolini, J. Eschke, B. Faatz, and M. Lomperski, “Vibration Stability Studies of a Type III+ XFEL/FLASH Superconducting Accelerating Module Operating at 2K”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper TUPPH078, pp. 421-424.
- F. Gougnaud, Y. Lussignol, J. F. Denis, F. Gohier, and T. J. Joannem, “CEA Irfu EPICS Environment for the SARAF-LINAC Project”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1335-1339.
- K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished.
- M. Patecki, A. Mereghetti, D. Mirarchi, and S. Redaelli, “Conceptual Design of a Collimation System for the CERN Super Proton Synchrotron”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 802-805.
- H. Danared, A. Källberg, K.-G. Rensfelt, and A. Simonsson, “Observations of Ordered Ion Beams in CRYRING”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH165, pp. 2038-2040.
- T. K. Charles, D. M. Paganin, M. J. Boland, and R. T. Dowd, “Beam by Design: Current Pulse Shaping Through Longitudinal Dispersion Control”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 644-647.
- J. C. McNeur, J. B. Rosenzweig, G. Travish, J. Zhou, and R. B. Yoder, “Resonance, Particle Stability, and Acceleration in the Micro-Accelerator Platform”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP010, pp. 121-123.
- K. H. Kim et al., “Development of Pattern Awareness Unit (PAU) for the LCLS Beam Based Fast Feedback System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN032, pp. 954-957.
- T. Masuda, T. Fukui, T. Kudo, T. Ohata, and R. T. Tanaka, “Evaluation and Improvement of PoE-based Temperature Measurement Module”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP018, pp. 207-209.
- M. Pezzetti, H. Coppier, and D. O. Tavares, “Advanced Control Facility for the Cern-Unicos Framework”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP060, pp. 516-518.
- N. Yamamoto et al., “Study of the Coherent Terahertz Radiation by Laser Bunch Slicing at UVSOR-II Electron Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA037, pp. 2570-2572.
- Y. K. Batygin, C. Pillai, and L. Rybarcyk, “Space-charge Effects in H- Low-energy Beam Transport of LANSCE”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOCS5, pp. 64-66.
- G. D'Auria, “Application of X-band Linacs”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper WE1A03, pp. 724-728.
- H. Zheng, H. Cao, and Y. X. Chen, “Design of PLC Temperature Flow Acquisition System Based on EPICS”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 109-110.
- B. P. Bielawski, F. Locci, and S. Magnoni, “CLIC-ACM: Acquisition and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOBB06, pp. 1404-1407.
- A. Miura, “Progress of Beam Instumentation in J-PARC Linac”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOIA02, pp. XX-XX.
- E. Bjorklund, “Replacing the Engine in Your Car While You Are Still Driving It”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1131-1133.
- G. De Ninno, A. Antoniazzi, B. Diviacco, D. Fanelli, R. Meucci, and M. Trovo, “Stabilization of the Elettra Storage-Ring Free-Electron Laser using a Derivative Feedback”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper THPP007, pp. XX-XX.
Back to search