Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. Xu, T. R. Bieler, and N. T. Wright, “Comparison of the Lattice Thermal Conductivity of Superconducting Tantalum and Niobium”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 148-153. doi:10.18429/JACoW-SRF2019-MOP041
[n] J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper FRABI1, pp. 294-298.
[n] H. Matsumoto et al., “RF Breakdown Studies on an S-Band Disk Loaded Structure”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1654-1657.
[n] K. Kaspar and H. G. K?Ânig, “Development of the Fast Feedback System for the GSI SIS Cavities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP5A08, pp. 1841-1843.
[n] A. A. Melnikov and S. A. Gavrilov, “Modernization and Operation of Ionization-proportional Gas Counter at INR RAS Proton Linac”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 103-106. doi:10.18429/JACoW-IBIC2020-WEPP04
[n] E. Perelstein et al., “JINR Tau-Charm Factory Design Study”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 476-479.
[n] A. Akiyama, T. Katoh, Ta. Kubo, S. Kurokawa, T. Nakamura, and M. Yoshida, “Magnet Power Supply System for KEK-B Accelerator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP21G, pp. 2085-2090.
[n] P. Manini, A. Conte, B. Mountford, and S. Raimondi, “First Experience on NEG Coated Chambers at the Australian Synchrotron Light Source”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP140, pp. 3690-3692.
[n] S. Buhler et al., “Status Report of the TTF Capture Cavity Cryostat”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F28, pp. 689-693.
[n] A. Romanenko and R. Russo, “RF Properties at 6 GHz of Ultra-High Vacuum Cathodic Arc Films up to 450 Oersted”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP63, pp. 388-390.
[n] H. D. Thomsen and S. P. M?©ller, “Performance of the ESS High Energy Beam Transport under Non-nominal Conditions”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2124-2126. doi:10.18429/JACoW-IPAC2014-WEPRO074
[n] E. Tanabe, A. Nakayama, F. Oda, and M. Yokoyama, “A Novel Structure of Multi-Purpose RF Gun”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper MO4050, pp. 162-164.
[n] H. D. Thomsen and S. P. M?©ller, “The Design of the Fast Raster System for the European Spallation Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2118-2120. doi:10.18429/JACoW-IPAC2014-WEPRO072
[n] T. Ishikawa, “Nano-Focusing of XFEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper FROB001, pp. XX-XX.
[n] S. V. Weber et al., “Final Commissioning Results from the Injection System for the Australian Synchrotron Project”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN007, pp. 926-928.
[n] M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2258-2261. doi:10.18429/JACoW-IPAC2016-WEPMR003
[n] Y. Iwashita, S. Abe, and H. Takekoshi, “Q Value of DAW Linac with Biperiodic T Stem”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-45, pp. 151-153.
[n] V. Belov, A. Makarov, V. Nikogosian, H. Symonian, and N. Zapolsky, “The Slow Extraction of Electrons from Synchrotrons and Storage Ring using Synchrotron Radiation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1231-1233.
[n] S. Bousson, “Advances in Superconducting RF Cavity Stiffening by Thermal Spraying”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA003, pp. 542-549.
[n] A. Mochihashi and M. Takao, “Numerical Calculation and Experiment of Ion Related Phenomenon in SPring-8 Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1680-1682. doi:10.18429/JACoW-IPAC2014-TUPRI050
[n] M. Nordby, E. F. Daly, N. Kurita, and J. Langton, “A Zero-Length Bellows for the PEP-II High-Energy Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP08, pp. 2051-2053.
[n] P. A. McIntosh, C. D. Beard, D. M. Dykes, and A. J. Moss, “RF Requirements for the 4GLS Linac Systems”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH162, pp. 439-441.
[n] C. Zhang et al., “Front-End Linac Design and Beam Dynamics Simulations for MYRRHA”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB005, pp. 849-851.
[n] H. D. Thomsen and S. P. M?©ller, “The ESS High Energy Beam Transport after the 2013 Design Update”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2121-2123. doi:10.18429/JACoW-IPAC2014-WEPRO073
[n] J. R. Lackey, D. J. Harding, J. A. John, V. S. Kashikhin, A. Makarov, and E. Prebys, “New Pulsed Orbit Bump Magnets for the Fermilab Booster Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT013, pp. 1341-1343.
[n] D. M. Dykes, P. A. McIntosh, M. W. Poole, and V. P. Suller, “Superconducting RF Systems for Light Sources?”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A01, pp. 2034-2036.
[n] K. Nanbu et al., “Development Status of Linear Focal Cherenkov Ring Camera”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 152-154. doi:10.18429/JACoW-IPAC2016-MOPMB029
[n] H. P. Chang et al., “Operational Experience of the Insertion Devices and Expectation of the Future Superconducting Wigglers at NSRRC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG015, pp. 1044-1046.
[n] H. Yamaguchi et al., “DC septum magnet with low current density for the synchrotron light source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3646-3649. doi:10.18429/JACoW-IPAC2023-WEPM040
[n] L. Rybarcyk, C. T. Kelsey, R. C. McCrady, and X. Pang, “H- Beam Loss and Evidence for Intrabeam Stripping in the LANSCE Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP067, pp. 3892-3894.
[n] H. Saugnac et al., “Spoke Cryomodule Prototyping for the MINERVA Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 315-319. doi:10.18429/JACoW-SRF2019-MOP098
[n] H. Li, A. K. Bhattacharyya, L. Hermansson, M. Jobs, J. M. Y. Ruber, and R. Santiago Kern, “High Power Testing of the First ESS SPOKE Cavity Package”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 817-820. doi:10.18429/JACoW-SRF2017-THPB035
[n] M. Delonca, T. Antonakakis, D. Grenier, C. Maglioni, and A. Sarrió Martínez, “A Clamped Be Window for the Dump of the HiRadMat Experiment at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP015, pp. 3758-3760.
[n] M. Deile et al., “The First 1 1/2 Years of TOTEM Roman Pot Operation at LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO011, pp. 502-504.
[n] M. Fouaidy and N. Hammoudi, “RRR of Copper Coating and Low Temperature Electrical Resistivity of Material for TTF Couplers”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP65, pp. 392-398.
[n] T. Watanabe et al., “Current Status of SPring-8 Upgrade Plan”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC032, pp. 2981-2983.
[n] T. Kubo, Y. Ajima, H. Inoue, K. Umemori, Y. Watanabe, and M. Yamanaka, “In-house Production of a Large-Grain Single-Cell Cavity at Cavity Fabrication Facility and Results of Performance Tests”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2519-2521. doi:10.18429/JACoW-IPAC2014-WEPRI022
[n] C. Adolphsen and P. Corredoura, “The Proposed NLC Linac LLRF System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6A08, pp. 459-461.
For LaTeX
Use Complete Form
For BibTeX
References
- P. Xu, T. R. Bieler, and N. T. Wright, “Comparison of the Lattice Thermal Conductivity of Superconducting Tantalum and Niobium”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 148-153.
- J. S. Kolski, R. J. Macek, R. C. McCrady, and X. Pang, “Independent Component Analysis (ICA) Applied to Long Bunch Beams in the Los Alamos Proton Storage Ring”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper FRABI1, pp. 294-298.
- H. Matsumoto et al., “RF Breakdown Studies on an S-Band Disk Loaded Structure”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1654-1657.
- K. Kaspar and H. G. K?Ânig, “Development of the Fast Feedback System for the GSI SIS Cavities”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP5A08, pp. 1841-1843.
- A. A. Melnikov and S. A. Gavrilov, “Modernization and Operation of Ionization-proportional Gas Counter at INR RAS Proton Linac”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 103-106.
- E. Perelstein et al., “JINR Tau-Charm Factory Design Study”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 476-479.
- A. Akiyama, T. Katoh, Ta. Kubo, S. Kurokawa, T. Nakamura, and M. Yoshida, “Magnet Power Supply System for KEK-B Accelerator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP21G, pp. 2085-2090.
- P. Manini, A. Conte, B. Mountford, and S. Raimondi, “First Experience on NEG Coated Chambers at the Australian Synchrotron Light Source”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP140, pp. 3690-3692.
- S. Buhler et al., “Status Report of the TTF Capture Cavity Cryostat”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F28, pp. 689-693.
- A. Romanenko and R. Russo, “RF Properties at 6 GHz of Ultra-High Vacuum Cathodic Arc Films up to 450 Oersted”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP63, pp. 388-390.
- H. D. Thomsen and S. P. M?©ller, “Performance of the ESS High Energy Beam Transport under Non-nominal Conditions”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2124-2126.
- E. Tanabe, A. Nakayama, F. Oda, and M. Yokoyama, “A Novel Structure of Multi-Purpose RF Gun”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper MO4050, pp. 162-164.
- H. D. Thomsen and S. P. M?©ller, “The Design of the Fast Raster System for the European Spallation Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2118-2120.
- T. Ishikawa, “Nano-Focusing of XFEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper FROB001, pp. XX-XX.
- S. V. Weber et al., “Final Commissioning Results from the Injection System for the Australian Synchrotron Project”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN007, pp. 926-928.
- M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2258-2261.
- Y. Iwashita, S. Abe, and H. Takekoshi, “Q Value of DAW Linac with Biperiodic T Stem”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-45, pp. 151-153.
- V. Belov, A. Makarov, V. Nikogosian, H. Symonian, and N. Zapolsky, “The Slow Extraction of Electrons from Synchrotrons and Storage Ring using Synchrotron Radiation”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1231-1233.
- S. Bousson, “Advances in Superconducting RF Cavity Stiffening by Thermal Spraying”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper THA003, pp. 542-549.
- A. Mochihashi and M. Takao, “Numerical Calculation and Experiment of Ion Related Phenomenon in SPring-8 Storage Ring”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1680-1682.
- M. Nordby, E. F. Daly, N. Kurita, and J. Langton, “A Zero-Length Bellows for the PEP-II High-Energy Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP08, pp. 2051-2053.
- P. A. McIntosh, C. D. Beard, D. M. Dykes, and A. J. Moss, “RF Requirements for the 4GLS Linac Systems”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH162, pp. 439-441.
- C. Zhang et al., “Front-End Linac Design and Beam Dynamics Simulations for MYRRHA”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB005, pp. 849-851.
- H. D. Thomsen and S. P. M?©ller, “The ESS High Energy Beam Transport after the 2013 Design Update”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2121-2123.
- J. R. Lackey, D. J. Harding, J. A. John, V. S. Kashikhin, A. Makarov, and E. Prebys, “New Pulsed Orbit Bump Magnets for the Fermilab Booster Synchrotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT013, pp. 1341-1343.
- D. M. Dykes, P. A. McIntosh, M. W. Poole, and V. P. Suller, “Superconducting RF Systems for Light Sources?”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4A01, pp. 2034-2036.
- K. Nanbu et al., “Development Status of Linear Focal Cherenkov Ring Camera”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 152-154.
- H. P. Chang et al., “Operational Experience of the Insertion Devices and Expectation of the Future Superconducting Wigglers at NSRRC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG015, pp. 1044-1046.
- H. Yamaguchi et al., “DC septum magnet with low current density for the synchrotron light source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM040, pp. 3646-3649.
- L. Rybarcyk, C. T. Kelsey, R. C. McCrady, and X. Pang, “H- Beam Loss and Evidence for Intrabeam Stripping in the LANSCE Linac”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP067, pp. 3892-3894.
- H. Saugnac et al., “Spoke Cryomodule Prototyping for the MINERVA Project”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 315-319.
- H. Li, A. K. Bhattacharyya, L. Hermansson, M. Jobs, J. M. Y. Ruber, and R. Santiago Kern, “High Power Testing of the First ESS SPOKE Cavity Package”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 817-820.
- M. Delonca, T. Antonakakis, D. Grenier, C. Maglioni, and A. Sarrió Martínez, “A Clamped Be Window for the Dump of the HiRadMat Experiment at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPP015, pp. 3758-3760.
- M. Deile et al., “The First 1 1/2 Years of TOTEM Roman Pot Operation at LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPO011, pp. 502-504.
- M. Fouaidy and N. Hammoudi, “RRR of Copper Coating and Low Temperature Electrical Resistivity of Material for TTF Couplers”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP65, pp. 392-398.
- T. Watanabe et al., “Current Status of SPring-8 Upgrade Plan”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC032, pp. 2981-2983.
- T. Kubo, Y. Ajima, H. Inoue, K. Umemori, Y. Watanabe, and M. Yamanaka, “In-house Production of a Large-Grain Single-Cell Cavity at Cavity Fabrication Facility and Results of Performance Tests”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2519-2521.
- C. Adolphsen and P. Corredoura, “The Proposed NLC Linac LLRF System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6A08, pp. 459-461.
Back to search