Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641.
[n] A. G. Alekseev et al., “Basic Design Parameters of a Small Size Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F03, pp. XX-XX.
[n] R. Bork, R. Abbott, D. Barker, and J. W. Heefner, “An Overview of the LIGO Control and Data Acquisition Systems”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUBI001, pp. XX-XX.
[n] J.-M. Filhol et al., “Operation and Performance Upgrade of the SOLEIL Storage Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP021, pp. 2312-2314.
[n] T. Birke, F. Falkenstern, R. Mueller, and A. Schaelicke, “Comprehensive Fill Pattern Control Engine: Key to Top-Up Operation Quality”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 18-21. doi:10.18429/JACoW-ICALEPCS2015-MOC3O01
[n] M. W. McGee, S. K. Chandrasekaran, A. C. Crawford, E. R. Harms, J. R. Leibfritz, and G. Wu, “Cryomdoule Test Stand Reduced-Magnetic Support Design at Fermilab”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2262-2264. doi:10.18429/JACoW-IPAC2016-WEPMR004
[n] V. A. Belyakov, R. N. Litunovsky, O. A. Minyaev, and D. V. Efremov, “Beam Extraction System in the Kiev 240-cm Isochronous Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-27, pp. 326-328.
[n] T. J. Maxwell, P. Piot, J. Ruan, and R. M. Thurman-Keup, “Single-shot Electro-optic Sampling of Coherent Transition Radiation at the A0 Photoinjector”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC169, pp. 1431-1433.
[n] M. Pont, G. Benedetti, J. Moldes, R. Mu??oz Horta, A. Olmos, and F. Perez, “Top-up Operation at ALBA Synchrotron Light Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 301-303. doi:10.18429/JACoW-IPAC2014-MOPRO090
[n] A. Skrinsky, “Accelerator Field Development at Novosibirsk (History, Status, Prospects)”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MAD04, pp. 14-26.
[n] S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
[n] F. M. Velotti et al., “Analysis of the SPS Long Term Orbit Drifts”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3914-3917. doi:10.18429/JACoW-IPAC2016-THPOR054
[n] R. Maldonado, “Overview of X-Ray Lithography at IBM Using a Compact Storage Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 542-547.
[n] K. S. White, “Status and Future Developments in Large Accelerator Control Systems”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEA2IS01, pp. 239-244.
[n] A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
[n] J. L. Merson and G. P. Boicourt, “SUPERFISH Accuracy Dependence on Mesh Size”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 186-189.
[n] M. F. Vorogushin, Yu. N. Gavrish, A. V. Galchuk, L. I. Korolev, V. G. Mudrolyubov, and A. V. Stepanov, “APPLIED LOW-ENERGY CYCLOTRON”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WENO17, pp. XX-XX.
[n] M. Clausen et al., “An XML Driven Graphical User Interface and Application Management Toolkit”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THCT005, pp. XX-XX.
[n] M. Mouat, E. Klassen, K. S. Lee, J. Pon, and P. Yogendran, “Disk Storage Upgrade in TRIUMF's Central Control System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO020, pp. 2037-2039.
For LaTeX
Use Complete Form
For BibTeX
References
- E. G. Cook et al., “Solid-State Modulators for RF and Fast Kickers”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAB008, pp. 637-641.
- A. G. Alekseev et al., “Basic Design Parameters of a Small Size Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F03, pp. XX-XX.
- R. Bork, R. Abbott, D. Barker, and J. W. Heefner, “An Overview of the LIGO Control and Data Acquisition Systems”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUBI001, pp. XX-XX.
- J.-M. Filhol et al., “Operation and Performance Upgrade of the SOLEIL Storage Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP021, pp. 2312-2314.
- T. Birke, F. Falkenstern, R. Mueller, and A. Schaelicke, “Comprehensive Fill Pattern Control Engine: Key to Top-Up Operation Quality”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 18-21.
- M. W. McGee, S. K. Chandrasekaran, A. C. Crawford, E. R. Harms, J. R. Leibfritz, and G. Wu, “Cryomdoule Test Stand Reduced-Magnetic Support Design at Fermilab”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2262-2264.
- V. A. Belyakov, R. N. Litunovsky, O. A. Minyaev, and D. V. Efremov, “Beam Extraction System in the Kiev 240-cm Isochronous Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-27, pp. 326-328.
- T. J. Maxwell, P. Piot, J. Ruan, and R. M. Thurman-Keup, “Single-shot Electro-optic Sampling of Coherent Transition Radiation at the A0 Photoinjector”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC169, pp. 1431-1433.
- M. Pont, G. Benedetti, J. Moldes, R. Mu??oz Horta, A. Olmos, and F. Perez, “Top-up Operation at ALBA Synchrotron Light Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 301-303.
- A. Skrinsky, “Accelerator Field Development at Novosibirsk (History, Status, Prospects)”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MAD04, pp. 14-26.
- S. Liu et al., “First results of the Hard X-Ray Self-Seeding Commissioning at the European XFEL”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIR09, pp. XX-XX.
- F. M. Velotti et al., “Analysis of the SPS Long Term Orbit Drifts”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3914-3917.
- R. Maldonado, “Overview of X-Ray Lithography at IBM Using a Compact Storage Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 542-547.
- K. S. White, “Status and Future Developments in Large Accelerator Control Systems”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEA2IS01, pp. 239-244.
- A. Bogomyagkov et al., “VEPP-4M Operation at Low Energy”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THM204, pp. XX-XX.
- J. L. Merson and G. P. Boicourt, “SUPERFISH Accuracy Dependence on Mesh Size”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 186-189.
- M. F. Vorogushin, Yu. N. Gavrish, A. V. Galchuk, L. I. Korolev, V. G. Mudrolyubov, and A. V. Stepanov, “APPLIED LOW-ENERGY CYCLOTRON”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WENO17, pp. XX-XX.
- M. Clausen et al., “An XML Driven Graphical User Interface and Application Management Toolkit”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THCT005, pp. XX-XX.
- M. Mouat, E. Klassen, K. S. Lee, J. Pon, and P. Yogendran, “Disk Storage Upgrade in TRIUMF's Central Control System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO020, pp. 2037-2039.
Back to search