Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Kaji, M. Hirose, Y. Iitsuka, and T. Obina, “Archive System of Beam Injection Information at SuperKEKB”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2550-2553. doi:10.18429/JACoW-IPAC2019-WEPGW036
[n] J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 386-389.
[n] J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
[n] M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
[n] H. K. Sayed, S. A. Bogacz, and Y. Roblin, “Correction of the Chromaticity up to Second Order for MEIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB045, pp. 1629-1631.
[n] N. A. Huque et al., “BNL 56 MHz HOM Damper Fabrication at JLab”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB063, pp. 1262-1266.
[n] M. Svandrlik et al., “Elettra New Full Energy Injector Status Report”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS033, pp. 3356-3358.
[n] K. Asano, T. Furuya, S. Mitsunobu, T. Tajima, and T. Takahashi, “Stable Performance of 508 MHz Superconducting RF Cavities for KEKB”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95C11, pp. 419-423.
[n] H. K. Sayed, S. A. Bogacz, and P. Chevtsov, “Spin Rotator Optics for MEIC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB044, pp. 1626-1628.
[n] J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
[n] L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
[n] J. Dey, I. Kourbanis, and J. Steimel, “2.5 MHz Feedforward Beam Loading Compensation in the Fermilab Main Injector”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB030, pp. 3356-3358.
[n] N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1962-1964. doi:10.18429/JACoW-IPAC2014-WEPRO011
[n] S. Belomestnykh et al., “Commissioning of the Superconducting RF Cavities for the CESR Luminosity Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP135, pp. 980-982.
[n] T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
[n] D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3995-3997. doi:10.18429/JACoW-IPAC2014-THPRI095
For LaTeX
Use Complete Form
For BibTeX
References
- H. Kaji, M. Hirose, Y. Iitsuka, and T. Obina, “Archive System of Beam Injection Information at SuperKEKB”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2550-2553.
- J. H. B. Madsen et al., “Status Report on the LEP Pre-Injector (LPI) and the Proton Synchrotron (PS) as A e e - Accelerator”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 386-389.
- J. Dey and J. M. Steimel, “Improving the Linearity of Ferrite Loaded Cavities Using Feedback”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH046, pp. 873-875.
- M. Fujieda et al., “A New Type of RF Cavity For High Intensity Proton Synchrotron Using High Permeability Magnetic Alloy”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THOB03B, pp. 299-301.
- H. K. Sayed, S. A. Bogacz, and Y. Roblin, “Correction of the Chromaticity up to Second Order for MEIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB045, pp. 1629-1631.
- N. A. Huque et al., “BNL 56 MHz HOM Damper Fabrication at JLab”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB063, pp. 1262-1266.
- M. Svandrlik et al., “Elettra New Full Energy Injector Status Report”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS033, pp. 3356-3358.
- K. Asano, T. Furuya, S. Mitsunobu, T. Tajima, and T. Takahashi, “Stable Performance of 508 MHz Superconducting RF Cavities for KEKB”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95C11, pp. 419-423.
- H. K. Sayed, S. A. Bogacz, and P. Chevtsov, “Spin Rotator Optics for MEIC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB044, pp. 1626-1628.
- J. R. Nelson et al., “National Ignition Facility (NIF) Dilation X-ray Imager (DIXI) Diagnostic Instrumentation and Control System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC073, pp. 751-754.
- L. J. Lagin et al., “The Overview of the National Ignition Facility Distributed Computer Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP001, pp. XX-XX.
- J. Dey, I. Kourbanis, and J. Steimel, “2.5 MHz Feedforward Beam Loading Compensation in the Fermilab Main Injector”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB030, pp. 3356-3358.
- N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1962-1964.
- S. Belomestnykh et al., “Commissioning of the Superconducting RF Cavities for the CESR Luminosity Upgrade”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP135, pp. 980-982.
- T. Sloan and T. Miller, “Design Considerations of the IUCF Cooler Dipole Magnet Vacuum Can”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B35, pp. 145-146.
- D. Anderson et al., “Testing Quality and Metrics for the LHC Magnet Powering System throughout Past and Future Commissioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3995-3997.
Back to search