JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

Some papers titles are all uppercase, you must correct this before using this reference.

Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	N. Guillotin et al., “Operation of SOLEIL with the Two 352 MHz Cryomodules in the Storage Ring”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO030, pp. 268-268. 
[n]	J. Reich, S. Martin, D. Proticacute, and G. Riepe, “Improving the Energy Resolution of Particle Detection by Proper Beam Matching at JULIC”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-05, pp. 235-239. 
[n]	G. P. A. Berg et al., “Modes of Operation for the Cooler Ring COSY”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper O04, pp. 601-604. 
[n]	F. Belloni et al., “Space Charge Effects Studies for the ESS Cold Linac Beam Profiler”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 371-374. doi:10.18429/JACoW-IBIC2018-WEOC04
[n]	L. Arnaudon et al., “Recent Achievements in Transverse Spin-Polarisation at LEP”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 187-190. 
[n]	A. Luccio, D. J. Clark, D. Elo, P. Frazier, D. Morris, and M. Renkas, “A Polarized Ion Source for the Berkeley 88 - Inch Cyclotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 140-145. 
[n]	A. G. Kobets et al., “Lepta - the Facility for Fundamental and Applied Research”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper FRXAUD02, pp. 179-181. 
[n]	R. S. Livingston, “Session IV Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182. 
[n]	A. A. Sidorin et al., “A Method for Measuring the Positron Lifetime in Solid Matter with a Continuous Positron Beam”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 267-269. doi:10.18429/JACoW-RUPAC2018-TUPSA58
[n]	J. A. Benjamin et al., “Terminal Ion Source System for the Brookhaven Three-Stage Tandem Facility”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 118-123. 
[n]	H. Gaus, B. Nguyen, B. Comiskey, E. Loftin, and J. Bradley III, “Review of known extraction kickers”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3587-3590. doi:10.18429/JACoW-IPAC2024-THPR39
[n]	J. Bradley III, T. Hardek, M. T. Lynch, D. E. Rees, W. Roybal, and P. J. Tallerico, “Spallation Neutron Source High-Power RF Transmitter Design for High Availability, Ease of Installation and Cost Containment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG015, pp. 1458-1460. 
[n]	V. N. Barkovsky, Ju. G. Basargin, R. N. Litunovsky, O. A. Minjaev, A. V. Popov, and A. V. Stepanov, “Ion Optical Studies of Extraction Transport and Analysis Systems for 240-cm Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-005, pp. XX-XX. 
[n]	G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2240-2243. doi:10.18429/JACoW-IPAC2019-WEXXPLS3
[n]	H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179. 
[n]	A.Bogomyagkov, “IR design for Super-ct-factory”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper WEACH10, pp. XX-XX. 
[n]	G. M. Gammel, E. F. Meier, and R. M. Mobley, “Ion Source and Transport System for BNL-HIF Pre-Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-10, pp. 453-456. 
[n]	B. Podobedov, B. Kushner, S. Ramamoorthy, Y. Tang, and E. Zitvogel, “Fast Digital Orbit Feedback Systems at NSLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPA005, pp. 396-398. 
[n]	A. Ijspeert, A. Puntambekar, and J. Salminen, “Superconducting Sextupole Corrector Magnet for the LHC Main Dipoles”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP024G, pp. 2252-2254. 
[n]	K. Crandall, “Error Studies Using PARTRACE, a New Program that Combines PARMILA and TRACE 3-D”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-13, pp. 335-337. 
[n]	C. Limborg and J. Sebek, “Measurement of High Q RF Cavity Impedance with Beam”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP37C, pp. 972-974. 
[n]	A. Ando, “New Subaru and Other Light Source Projects in Japan”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6A004, pp. 645-652. 
[n]	M. H. R. Donald et al., “A Superconducting Synchrotron Design Study at the Rutherford Laboratory”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 703-707. 
[n]	A. Stillman, “The Slow Control System of the Muon g-2 Experiment”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA09, pp. 2211-2213. 
[n]	V. Karpenko et al., “Mechanical Design of Recirculating Accelerator Experiments for Heavy-Ion Fusion”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR17, pp. 837-839. 
[n]	X. D. Yang and Y. J. Yuan, “Commissioning of Electron Cooling in CSRe”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper FRM1MCIO02, pp. 173-177. 
[n]	R. Stassen, B. Breitkreutz, G. Schug, and H. Stockhorst, “Stochastic Cooling of Heavy Ions in the HESR”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOYAUD02, pp. 15-19. 
[n]	W. Reass, V. P. Derenchuk, D. Rees, T. Rinckel, and G. Visser, “The Klystron RF Systems for the Indiana University LENS Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS027, pp. 2394-2396. 
[n]	C. H. Haquin et al., “Spiral2 Control Command: a Standardized Interface between High Level Applications and EPICS IOCs”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN005, pp. 879-881. 
[n]	L. Solomon, D. Lynch, J. Safranek, and O. Singh, “Chamber Motion Measurements at the NSLS X-RAY Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA167, pp. 2244-2246. 
[n]	D. L. Judd and R. S. Livingston, “Closing Remarks”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper Z-001, pp. XX-XX. 
[n]	G. S. Zanyan, B. Grigoryan, K. Manukyan, A. Sargsyan, and V. M. Tsakanov, “Low Emittance Booster Design for CANDLE Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC137, pp. 3209-3211. 
[n]	P. F. Dahl, S. Giordano, J. P. Hannwacker, K. Jellett, G. Parzen, and D. E. Young, “Linac Cavity Field Calculations”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-06, pp. 115-118. 
[n]	L. Tkachenko et al., “A Possibility of Development of Superconducting Dipole for Fast-Cycling Magnetic Fields”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE005, pp. 2436-2438. 
[n]	J. H. Kamperschroer, J. F. O'Hara, L. A. Day, J. D. Gilpatrick, and D. M. Kerstiens, “Analysis of Data from the LEDA Wire Scanner/Halo Scraper”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH037, pp. 1306-1308. 
[n]	M. Johnson, H.-H. Braun, T. J. C. Ekel?Âf, R. J. M. Y, and V. G. Ziemann, “RF-breakdown Experiments at the CTF3 Two-beam Test-stand”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP131, pp. 2800-2802. 
[n]	E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158. 
[n]	N. Pichoff et al., “The SARAF-LINAC project status (07/2024)”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB013, unpublished. 
[n]	J. J. Pon, E. Klassen, K. S. Lee, M. M. Mouat, and P. J. Yogendran, “Preliminary Use of PDAs in TRIUMF's Central Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP509, pp. XX-XX. 
[n]	B. Goddard et al., “Injection Beam Loss and Beam Quality Checks for the LHC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB066, pp. 1671-1673. 
[n]	O. Singh, S. Ramamoorthy, J. Sheehan, and J. Smith, “Upgrade of NSLS Timing System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA15, pp. 2223-2225. 
[n]	R. Frankel, “Experiments in Computer Control and Analysis of the AGS”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1042-1044. 
[n]	D. R. Edstrom et al., “50-MeV Run of the IOTA/FAST Electron Accelerator”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 326-329. doi:10.18429/JACoW-NAPAC2016-TUPOA19
[n]	C. G. Fong, T. J. Fessenden, R. L. Fulton, and D. Keefe, “Engineering Study of a 10 MeV Heavy Ion Linear Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 962-965. 
[n]	F. Pedersen and E. C. Raka, “A Measurement of the Longitudial Coupling Impedance in the Brookhaven AGS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3592-3595. 
[n]	V. Ayvazyan, K. Rehlich, S. N. Simrock, G. Amatuni, and A. Yayloyan, “The Design of the Control System for CANDLE”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO001, pp. 2001-2003. 
[n]	M. Y. Park et al., “The Vacuum Systems for PEFP Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB072, pp. 2884-2886. 
[n]	R. Hettel, R. Ortiz, J. Sebek, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP099L, pp. 1737-1739. 
[n]	Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454. 
[n]	G. Ulm, F. Bellorini, D. P. Brodrick, R. N. Fernandes, N. Levchenko, and D. P. Piso, “PLC Factory: Automating Routine Tasks in Large-Scale PLC Software Development”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 495-500. doi:10.18429/JACoW-ICALEPCS2017-TUPHA046
[n]	J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 595-598. 
[n]	P. A. Lin, C. K. Kuan, T. Y. Lee, H. Y. Lin, and I. C. Sheng, “Brazing and Helium Leaking Test for High Heat Load Components in the Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4004-4006. doi:10.18429/JACoW-IPAC2014-THPRI098
[n]	B. W. Allardyce et al., “The Extraction System of the Improved CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-17, pp. 287-291. 
[n]	P. F. Dahl, R. Christian, and G. Parzen, “Computer Calculations of the Magnetic Field of Alternating Gradient Synchrotron Magnets”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 408-412. 
[n]	R. Baartman and J. Doornbos, “Mass Separator for The ISAC Project at TRIUMPH”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP120G, pp. 2482-2484. 
[n]	J. G. Dorward, “A New Hydrodynamic Liquid Cooling Method for Edge-Cooled, Flat Conductor Magnet Coils and for Liquid-Cooled Ferrite RF Resonator Discs”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 410-414. 
[n]	G. Danby and J. Jackson, “Vacuum Chamber EDDY Current Correction Coil for the AGS Booster”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1035-1038. 
[n]	H. Braun, A. V. Kulikov, R. Pitthan, and M. Woodley, “Nonlinear Effects in the SLC e Transport Line”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1845-1848. 
[n]	G. Muelhaupt, G. Schmidt, and U. Weinrich, “First Results of Beam Storing in the ESRF Booster Synchrotron”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP037G, pp. 635-637. 
[n]	R. S. Livingston, “Survey of Operating Sector-Focused Cyclotrons”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63A01, pp. XX-XX. 
[n]	F. R. Osswald, E. Bouquerel, D. Boutin, W. Beeckman, and J. L. Lancelot, “Optimization of Quadripolar Field Production for Electrostatic Ion Beam Focusing”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2468-2470. doi:10.18429/JACoW-IPAC2014-WEPME080
[n]	D. Kassner, “Mechanical Design of ISABELLE Magnet Cryostats”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1260-1263. 
[n]	M. Kim and M. Kwon, “LabVIEW-EPICS Interfaces in KSTAR Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP519, pp. XX-XX. 
[n]	W. B. Sampson, P. F. Dahl, S. Kiss, A. D. McInturff, and K. E. Robins, “ISABELLE Quadrupoles”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1296-1299. 
[n]	P. S. Marroquin, “Integrating Externally Developed Systems for SNS Linac Cooling and Vacuum ”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP063, pp. XX-XX. 
[n]	D. L. Hall et al., “Surface Analysis of Features Seen on Nb3Sn Sample Coupons Grown by Vapour Diffusion”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1130-1133. doi:10.18429/JACoW-IPAC2017-MOPVA119
[n]	S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252. 
[n]	D. McGinnis and J. Marriner, “Design of  4-8 GHz Stochastic Cooling Equalizers for the Fermilab Accumulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1392-1395. 
[n]	R. D. Porter et al., “Next Generation Nb3Sn SRF Cavities for Linear Accelerators”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 462-465. doi:10.18429/JACoW-LINAC2018-TUPO055
[n]	J. E. Allinger, G. T. Danby, J. W. Jackson, I. Polk, and A. Prodell, “High Field Iron Magnets for Operation at Cyrogenic Temperatures”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 728-734. 
[n]	M. Therasse et al., “First HIE-ISOLDE Cryo-module Assembly at CERN”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB106, pp. 874-878. 
[n]	M. J. Tannenbaum, A. K. Ghosh, K. E. Robins, and W. B. Sampson, “Magnetic Properties of the Iron Laminations for CBA Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3472-3475. 
[n]	K. Fuchsberger, T. Baer, R. Schmidt, and J. Wenninger, “LHC Orbit Correction Reproducibility and Related Machine Protection”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP010, pp. 3746-3748. 
[n]	T. Morishita, K. Hasegawa, Y. Kondo, H. Oguri, and M. Otani, “Field Tuning of a Radio-frequency Quadrupole Using Full 3D Modeling”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 798-801. doi:10.18429/JACoW-LINAC2018-THPO049
[n]	R. Bailey et al., “Three Years Operational Experience with LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 63-66. 
[n]	A. G. Kobets et al., “LEPTA Project: Towards Positronium”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB005, pp. 316-318. 
[n]	R. Rimmer et al., “The JLab Ampere-Class Cryomodule”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP46, pp. 567-570. 
[n]	S. C. Joshi et al., “R&D Activities on High Intensity Superconducting Proton Linac at RRCAT”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB003, pp. 843-845. 
[n]	A. M. Lombardi, “Commissioning of CERN LINAC4”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 658-662. doi:10.18429/JACoW-LINAC2018-TH1P01
[n]	H. O. Moser and R. Rossmanith, “Design Study of a Superconductive in-vacuo Undulator for Storage Rings with an Electrical Tunability between K=0 and 2”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3B16, pp. 2340-2342. 
[n]	R. S. Livingston, “A Survey of Methods of Accelerating Heavy Ions”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69E01, pp. XX-XX. 
[n]	R. W. Bierce, W. R. Fowkes, and J. H. Jasberg, “Window Materials Design and Properties for Use in High Power Klystrons”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 180-185. 
[n]	H. Gassot, F. B. Bouly, G. Olry, and S. Rousselot, “Electromechanical Design of 704MHz  0.65 SC Proton Cavity”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO021, pp. 110-113. 
[n]	E. G. Jacobson, R. L. Haffner, W. B. Ingalls, B. J. Meyer, and J. E. Stelzer, “Low-Stored-Energy 100-kV Regulator for Ion Sources at LANSCE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4094, pp. 621-623. 
[n]	W. Chupp et al., “A Quadrupole Beam Transport Experiment for Heavy Ions Under Extreme Space Charge Conditions”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2549-2552. 
[n]	S. Pissanetzky and W. Schmidt, “Design of the Dipole Magnet for the C" Version of the Superconducting Supercollider 20 TeV Twin-Beam Proton Accelerator (SSC)"”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3740-3743. 
[n]	J. C. Juillard and E. Peschardt, “Phase and Voltage Control in the LEP Radio-Frequency System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1639-1642. 
[n]	D. L. Borovina et al., “Accelerated Neutron-Induced Failure Tests of 3300-V IGBTs for the Spallation Neutron Source Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE039, pp. 1168-1170. 
[n]	U. Amaldi et al., “LIBO - A 3 GHz Proton Linac Booster of 200 MeV for Cancer Treatment”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4098, pp. 633-635. 
[n]	M.Zobov, “OVERVIEW OF BEAM DYNAMICS STUDIES AT DAFNE”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper TUACH01, pp. XX-XX. 
[n]	T. Plettner, R. L. Byer, and P. P. Lu, “Proposed Few-cycle Laser-particle Accelerator Structure”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS081, pp. 3175-3177. 
[n]	D. Berkovits, K. Dunkel, G. Feinberg, S. Halfon, and A. Shor, “Proton Beam Dynamics of the SARAF Linac”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP29, pp. 354-356. 
[n]	G. Shen, M. A. Davidsaver, and M. R. Kraimer, “EPICS V4 in Python”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS021, pp. 830-832. 
[n]	W. Schmidt, “High Power Klystrons for High Energy Physics Research Applications”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0035, pp. 424-426. 
[n]	G. Zschornack, F. Grossmann, V. P. Ovsyannikov, and E. Griesmayer, “Dresden Ebis-Sc ÔÇô A New Generation Of Powerful Ion Sources For The Medical Particle Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 298-299. 
[n]	R. Baartman, K. R. Kendall, M. McDonald, P. W. Schmor, and D. Yuan, “An Intense Ion Source for H- Cyclotrons”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 283-286. 
[n]	H. Saugnac et al., “Preliminary Design of a Stainless Steel Helium Tank and its Associated Cold Tuning System for 700 MHz SCRF Cavities for Proton”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT022, pp. XX-XX. 
[n]	M. Vadai, A. Alomainy, H. Damerau, S. S. Gilardoni, M. Giovannozzi, and A. Huschauer, “Beam Manipulations With Barrier Buckets in the CERN PS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1132-1135. doi:10.18429/JACoW-IPAC2019-MOPTS107
[n]	G. B. Shen, P. Chu, M. R. Kraimer, and J. Wu, “Design of Accelerator Online Simulator Server using Structured Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB024, pp. 2737-2739. 
[n]	A. Biocca et al., “The Advanced Light Source Accelerator Control System at Ten Years From Commissioning”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP008, pp. XX-XX. 
[n]	G. B. Shen, M. R. Kraimer, and L. Yang, “Prototype of Beam Commissioning Environment and its Applications for NSLS-II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB026, pp. 2740-2742. 
[n]	A. Abola et al., “Experience in Using Workstations as Hosts in an Accelerator Control Environment”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 594-597. 
[n]	D. Dale et al., “Custom Electronic Modules for the TRIUMF/ISAC Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_053. 
[n]	R. Gerig, M. May, C. Moore, S. Ohnuma, S. Pruss, and F. Turkot, “Design, Installation, and Commissioning of the Dzero Overpass at the Fermilab Main Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1666-1669. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search