Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
[n] L. Liu et al., “Status of SIRIUS operation with users”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2586-2589. doi:10.18429/JACoW-IPAC2023-WEOGA2
[n] Z. Izaola et al., “Design of the Bilbao Accelerator Low Energy Extraction Lines”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP010, pp. 1519-1521.
[n] J. Stovall and K. Crandall, “Quadrupole Field Aberrations: A Source of Emittance Growth at LAMPF”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper PUB13, pp. 409-409.
[n] R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
[n] M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX.
[n] K. McDonald, “Beam Dynamics of a Laser-Driven RF Electron Gun”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH2-04, pp. 519-519.
[n] S. A. Kahn et al., “Plasma Lens for Muon and Neutrino Beams”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP073, pp. 718-720.
[n] R. Roux et al., “Experimental Results on the PHIL Photo-injector Test Stand at LAL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB013, pp. 198-200.
[n] M. Schwickert et al., “Beam Current Monitors for FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3483-3485. doi:10.18429/JACoW-IPAC2014-THPME103
[n] A. Poncet, P. Cruikshank, V. Parma, P. M. Strubin, J.-P. G. Tock, and D. Tommasini, “Assembly and Quality Control of the LHC Cryostats at CERN. Motivations, Means, Results and Lessons Learned”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN079, pp. 338-340.
[n] B. Q. Zhao, M. Liu, C. X. Yin, and L. Y. Zhao, “Implementation of SINAP Timing System in Shanghai Proton Therapy Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4231-4233. doi:10.18429/JACoW-IPAC2016-THPOY056
[n] M. H. Wu et al., “Design and Experiment on Auto-alignment Control System of Taiwan Photon Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI078, pp. 3475-3477.
[n] H. Gassot, F. B. Bouly, G. Olry, and S. Rousselot, “Electromechanical Design of 704MHz 0.65 SC Proton Cavity”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO021, pp. 110-113.
[n] G. Ramian and L. Elais, “High-Current Beam Transport in Electrostatic Accelerator Tubes”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 307-310.
[n] D. Gavela et al., “Fabrication and Tests of the Re-buncher Cavities for the LIPAc Deuteron Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3884-3886. doi:10.18429/JACoW-IPAC2014-THPRI051
[n] R. Burek, H. Huck, G. Schmidt, T. Weis, and K. Wille, “Measurements of Broad Band Impedance Related Longitudinal Properties of Electron Bunches at DELTA”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP022, pp. 1577-1579.
[n] H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 245-248. doi:10.18429/JACoW-SRF2017-MOPB078
[n] I. Rodriguez, L. Garc?¡a-Tabar?®s, A. Ghigo, F. Marcellini, and F. Toral, “Design of a Strip-line Extraction Kicker for CTF3 Combiner Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS090, pp. 762-764.
[n] P. Proudlock, “Update on the Powering Strategy of LHC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA156, pp. 3746-3748.
[n] U. Amaldi et al., “LIBO - A 3 GHz Proton Linac Booster of 200 MeV for Cancer Treatment”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4098, pp. 633-635.
[n] H. Saugnac et al., “Preliminary Design of a Stainless Steel Helium Tank and its Associated Cold Tuning System for 700 MHz SCRF Cavities for Proton”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT022, pp. XX-XX.
[n] A. Chabert, G. Gendreau, P. Lapostolle, and P. Yvon, “Bunch Length Compression Inside a Separated Sector Isochronous Cyclotron and Related Problems”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2122-2125.
[n] D. Stratakis, J. S. Berg, J. C. Gallardo, and R. B. Palmer, “Effect of External Magnetic Fields on the Operation of RF Cavities”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP004, pp. 809-811.
[n] S. Park, W. J. Corbett, S. M. Gierman, and J. R. Maldonado, “Photocathode Studies for the SPEAR3 Injector RF Gun”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD076, pp. 1575-1577.
[n] K. H. Hsu et al., “Design Modifications and Installation of the Injection Girder System in the Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1968-1970. doi:10.18429/JACoW-IPAC2014-WEPRO013
[n] E. Bravin et al., “Beam Instrumentation for the HIE-ISOLDE Linac at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR048, pp. 891-893.
[n] T. Hoffmann and H. Br?ñuning, “REMBRANDT - REMote Beam instRumentation And Network Diagnosis Tool”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC006, pp. 1103-1106.
[n] R. Baer, T. Fleck, M. Kreider, and S. Mauro, “The Timing Master for the FAIR Accelerator Facility”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS011, pp. 996-998.
[n] B. Salvant et al., “Update of the SPS Impedance Model”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD056, pp. 2057-2059.
[n] S. R. Carriere, D. Beauregard, B. A. Schneider, G. A. Steel, and D. M. Taylor, “A Novel Filter Auto-Mounter for the BioXAS Beamlines at the CLS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 357-359. doi:10.18429/JACoW-MEDSI2016-WEPE29
[n] M. Plesko and G. Tkacik, “A Reflection on Introspection”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP540, pp. XX-XX.
[n] R. Tanner, E. Matias, and H. Zhang, “CLS Safety Systems”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper THX04, pp. 227-229.
[n] M. Dehn, F. Fichtner, J. Diefenbach, K. Aulenbacher, and R. Heine, “Beam diagnostics and instrumentation for MESA”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4746-4748. doi:10.18429/JACoW-IPAC2023-THPL118
[n] G. Asova et al., “Status of the Photo Injector Test Facility at DESY, Zeuthen Site (PITZ)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE010, pp. 2164-2166.
[n] O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Re-integration and Consolidation of the Detector Control System for the Compact Muon Solenoid Electromagnetic Calorimeter”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC035, pp. 154-157.
[n] D. R. S. Di Calafiori et al., “Improving the Compact Muon Solenoid Electromagnetic Calorimeter Control and Safety Systems for the Large Hadron Collider Run 2”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 117-120. doi:10.18429/JACoW-ICALEPCS2015-MOPGF016
[n] G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Ramamoorthy, P. Pearson, and J. Smith, “Error Handling in the NSLS Control System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPR07, pp. 2250-2252.
- L. Liu et al., “Status of SIRIUS operation with users”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGA2, pp. 2586-2589.
- Z. Izaola et al., “Design of the Bilbao Accelerator Low Energy Extraction Lines”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP010, pp. 1519-1521.
- J. Stovall and K. Crandall, “Quadrupole Field Aberrations: A Source of Emittance Growth at LAMPF”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper PUB13, pp. 409-409.
- R. Giannini and P. Mandrillon, “On the Possibility of Accelerating Multiply Charged Ions in the CERN Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-07, pp. 609-613.
- M. Sekoranja, S. Hunt, and A. Luedeke, “VisualDCT - Visual EPICS Database Configuration Tool”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP029, pp. XX-XX.
- K. McDonald, “Beam Dynamics of a Laser-Driven RF Electron Gun”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH2-04, pp. 519-519.
- S. A. Kahn et al., “Plasma Lens for Muon and Neutrino Beams”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP073, pp. 718-720.
- R. Roux et al., “Experimental Results on the PHIL Photo-injector Test Stand at LAL”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB013, pp. 198-200.
- M. Schwickert et al., “Beam Current Monitors for FAIR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3483-3485.
- A. Poncet, P. Cruikshank, V. Parma, P. M. Strubin, J.-P. G. Tock, and D. Tommasini, “Assembly and Quality Control of the LHC Cryostats at CERN. Motivations, Means, Results and Lessons Learned”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN079, pp. 338-340.
- B. Q. Zhao, M. Liu, C. X. Yin, and L. Y. Zhao, “Implementation of SINAP Timing System in Shanghai Proton Therapy Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4231-4233.
- M. H. Wu et al., “Design and Experiment on Auto-alignment Control System of Taiwan Photon Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI078, pp. 3475-3477.
- H. Gassot, F. B. Bouly, G. Olry, and S. Rousselot, “Electromechanical Design of 704MHz 0.65 SC Proton Cavity”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO021, pp. 110-113.
- G. Ramian and L. Elais, “High-Current Beam Transport in Electrostatic Accelerator Tubes”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 307-310.
- D. Gavela et al., “Fabrication and Tests of the Re-buncher Cavities for the LIPAc Deuteron Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3884-3886.
- R. Burek, H. Huck, G. Schmidt, T. Weis, and K. Wille, “Measurements of Broad Band Impedance Related Longitudinal Properties of Electron Bunches at DELTA”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP022, pp. 1577-1579.
- H. Guler, D. Auguste, J. Bonis, O. Bouras, M. El Khaldi, and W. Kaabi, “Power Coupler Design for the LUCRECE Project”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 245-248.
- I. Rodriguez, L. Garc?¡a-Tabar?®s, A. Ghigo, F. Marcellini, and F. Toral, “Design of a Strip-line Extraction Kicker for CTF3 Combiner Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS090, pp. 762-764.
- P. Proudlock, “Update on the Powering Strategy of LHC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA156, pp. 3746-3748.
- U. Amaldi et al., “LIBO - A 3 GHz Proton Linac Booster of 200 MeV for Cancer Treatment”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4098, pp. 633-635.
- H. Saugnac et al., “Preliminary Design of a Stainless Steel Helium Tank and its Associated Cold Tuning System for 700 MHz SCRF Cavities for Proton”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT022, pp. XX-XX.
- A. Chabert, G. Gendreau, P. Lapostolle, and P. Yvon, “Bunch Length Compression Inside a Separated Sector Isochronous Cyclotron and Related Problems”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2122-2125.
- D. Stratakis, J. S. Berg, J. C. Gallardo, and R. B. Palmer, “Effect of External Magnetic Fields on the Operation of RF Cavities”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP004, pp. 809-811.
- S. Park, W. J. Corbett, S. M. Gierman, and J. R. Maldonado, “Photocathode Studies for the SPEAR3 Injector RF Gun”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD076, pp. 1575-1577.
- K. H. Hsu et al., “Design Modifications and Installation of the Injection Girder System in the Taiwan Photon Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1968-1970.
- E. Bravin et al., “Beam Instrumentation for the HIE-ISOLDE Linac at CERN”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR048, pp. 891-893.
- T. Hoffmann and H. Br?ñuning, “REMBRANDT - REMote Beam instRumentation And Network Diagnosis Tool”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC006, pp. 1103-1106.
- R. Baer, T. Fleck, M. Kreider, and S. Mauro, “The Timing Master for the FAIR Accelerator Facility”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS011, pp. 996-998.
- B. Salvant et al., “Update of the SPS Impedance Model”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD056, pp. 2057-2059.
- S. R. Carriere, D. Beauregard, B. A. Schneider, G. A. Steel, and D. M. Taylor, “A Novel Filter Auto-Mounter for the BioXAS Beamlines at the CLS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 357-359.
- M. Plesko and G. Tkacik, “A Reflection on Introspection”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP540, pp. XX-XX.
- R. Tanner, E. Matias, and H. Zhang, “CLS Safety Systems”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper THX04, pp. 227-229.
- M. Dehn, F. Fichtner, J. Diefenbach, K. Aulenbacher, and R. Heine, “Beam diagnostics and instrumentation for MESA”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL118, pp. 4746-4748.
- G. Asova et al., “Status of the Photo Injector Test Facility at DESY, Zeuthen Site (PITZ)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE010, pp. 2164-2166.
- O. Holme, D. R. S. Di Calafiori, G. Dissertori, L. Djambazov, W. Lustermann, and S. Zelepoukine, “Re-integration and Consolidation of the Detector Control System for the Compact Muon Solenoid Electromagnetic Calorimeter”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC035, pp. 154-157.
- D. R. S. Di Calafiori et al., “Improving the Compact Muon Solenoid Electromagnetic Calorimeter Control and Safety Systems for the Large Hadron Collider Run 2”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 117-120.
- G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
Back to search