JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. Okamura et al., “SiC-JFET Switching Power Supply toward for Induction Ring Accelerators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 523-525. doi:10.18429/JACoW-IPAC2014-MOPME068
[n]	P. K. Saha et al., “Recent Results of Beam Loss Mitigation and Extremely Low Beam Loss Operation of J-PARC RCS”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1616-1619. doi:10.18429/JACoW-IPAC2022-WEOYGD1
[n]	X. M. Wen and X. H. Wang, “Commissioning Study of the Parasitic Mode with 3W1 Wiggler Magnet on the BEPC”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP15010, pp. XX-XX. 
[n]	M. Blaskiewicz, A. Chao, and Y. H. Chin, “Understanding the Effect of Space Charge on Instabilities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 743-745. doi:10.18429/JACoW-IPAC2015-MOPMN019
[n]	M. Bonesini and Y. Karadzhov, “The Particle Identification System for the MICE Beamline Characterization”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC142, pp. 1356-1358. 
[n]	E. Bozoki, J. Bittner, L. Blumberg, T. Dickinson, and J. Galayda, “Closed Orbit Correction of the NSLS VUV Ring”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3106-3109. 
[n]	K. M. Ha and J. H. Kim, “Digital Power Supply Development at the PLS”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA033, pp. 674-676. 
[n]	M. A. Epps, P. L. Gueye, and R. Kazimi, “The General ElectroN Induced Emission (GENIE) System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT072, pp. 3877-3879. 
[n]	K. Ohmi, Y. Sato, J. Takano, and S. Hatakeyama, “Measurement of Optics Errors and Space Charge Effects”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO1B03, pp. 517-521. 
[n]	C. J. Sharpe, “Software Architecture for Beamline Automation - VMXi Use-Case”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1054-1059. doi:10.18429/JACoW-ICALEPCS2017-WEBPL04
[n]	J. R. Lackey, D. J. Harding, J. A. John, V. S. Kashikhin, A. Makarov, and E. Prebys, “New Pulsed Orbit Bump Magnets for the Fermilab Booster Synchrotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT013, pp. 1341-1343. 
[n]	K. G. Nakamura et al., “Performance Evaluation of the Intra-Bunch Feedback System at J-PARC Main Ring”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper THCXB2, pp. 727-730. 
[n]	P. Martin et al., “Antiproton Acceleration in the Fermilab Main Ring and Tevatron”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 47-50. 
[n]	A. Y. Molodozhentsev, S. Igarashi, Y. Sato, and J. Takano, “Beam Dynamics Study for J-PARC Main Ring by Using the 'Pencil' and Space-charge Dominated Beam: Measurements and Simulations”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB51, pp. 157-161. 
[n]	G. M. Wang et al., “Study of Beam Emittance and Energy Spread Measurements Using SVD and Multiple Flags in the NSLS-II Booster Extraction Beamline”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA084, pp. 2677-2679. 
[n]	M. J. Shirakata, S. Igarashi, K. Ishii, Y. Sato, and J. Takano, “New Arrangement of Collimators of J-PARC Main Ring”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 543-547. doi:10.18429/JACoW-HB2016-THAM4Y01
[n]	K. G. Nakamura et al., “Development of Wideband BPM for Precise Measurement of Internal Bunch Motion”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 937-939. doi:10.18429/JACoW-IPAC2015-MOPTY001
[n]	A. H. Adeyemi et al., “PEPPo: Using a Polarized Electron Beam to Produce Polarized Positrons”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1878-1880. doi:10.18429/JACoW-IPAC2015-TUPMA020
[n]	R. Avery and D. J. Breuner, “Controlling Accelerator Engineering Costs”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 540-544. 
[n]	W. H. Hwang et al., “S-Band RF System for 0.1nm SASE FEL at PAL”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC28, pp. 304-306. 
[n]	M. Modena, H. Hsieh, and C. Sanelli, “High Current Density Septa for DAPhiNE Accumulator and Storage Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1472-1475. 
[n]	C. Sanelli and H. Hsieh, “Design of the 1.8 Tesla Wiggler for the DAPhiNE Main Rings”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1391-1394. 
[n]	S. M. Lidia, “Emittance Compensation Studies of Photoinjector Beams with Angular Momentum”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB022, pp. 2089-2091. 
[n]	J. M. Kim, K. M. Ha, H.-S. Kang, J. H. Kim, and E.-H. Lee, “Improvement of Web-Based Monitoring of EPICS-IOC for PAL Control System”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA075, pp. 428-430. 
[n]	R. P. Fliller, R. Heese, S. Kowalski, J. Rose, T. V. Shaftan, and G. M. Wang, “Beam Stacking in the NSLS-II Booster”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC041, pp. 1817-1819. 
[n]	Q. Qin et al., “Design and Optimization of the BEPCII Synchrotron Radiation Mode”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP019, pp. 1132-1134. 
[n]	Y. Shobuda et al., “Coupled Bunch Instability and Its Cure at J-PARC RCS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2946-2949. doi:10.18429/JACoW-IPAC2017-WEPIK014
[n]	R. P. Fliller et al., “NSLS-II Transport Line Performance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC042, pp. 1820-1822. 
[n]	W. E. Norum and B. X. Yang, “A Novel FPGA-Based Bunch Purity Monitor System at the APS Storage Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN115, pp. 4384-4386. 
[n]	H. Toyokawa, R. Kuroda, and H. Ohgaki, “W-band Electromagnetic Wave Undulator for AIST 800 MeV Electron Storage Ring TERAS”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN047, pp. 1025-1027. 
[n]	N. Iida et al., “Pulse-to-Pulse Switching Injection to Three Rings of Different Energies from a Single Electron Linac at KEK”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP110, pp. 2769-2771. 
[n]	B. Yee-Rendon, Y. H. Chin, H. Kuboki, T. Toyama, and M. Schenk, “Updated Model of the Resistive Wall Impedance for the Main Ring of J-PARC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3204-3206. doi:10.18429/JACoW-IPAC2018-THPAK002
[n]	A. Uchiyama, N. Fukunishi, and M. Komiyama, “Implementation of Web-based Operational Log System at RIBF”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1073-1077. doi:10.18429/JACoW-ICALEPCS2017-THAPL01
[n]	S. M. Lidia, D. H. Whittum, and J. T. Donohue, “W-Band Free Electron Laser for High Gradient Structure Research”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V035, pp. 900-902. 
[n]	M. Kando et al., “Improvement of the Low Energy Beam Transport System at the ICR 7 MeV Proton Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-30, pp. 122-124. 
[n]	Q. Qin et al., “Beam dynamics studies in the BEPCII storage rings”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper MOACH03, pp. XX-XX. 
[n]	V. A. Alexandrof et al., “Results of Final Focus Test Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG01, pp. 2742-2746. 
[n]	J. van Zeijts and A. Marusic, “Ramp Design and Implementation for the RHIC Deuteron-Gold and Polarized Proton Runs”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH113, pp. XX-XX. 
[n]	J. B. McCaslin, P. R. LaPlant, A. R. Smith, W. P. Swanson, and R. H. Thomas, “Neutron Production by Ne and Si Ions on a Thick Cu Target at 670 MeV x A with Application to Radiation Protection”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3104-3107. 
[n]	S. M. Lidia, G. Bazouin, and P. A. Seidl, “Time-Dependent Phase-Space Measurements of the Longitudinally Compressing Beam in NDCX-I”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS4, pp. 61-63. 
[n]	K. Akasaka, “Dark Current Simulation in High Gradient Accelerating Structure”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP066G, pp. 483-485. 
[n]	A. Sato, “G4beamline Simulation for the COMET Solenoid Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE046, pp. 3449-3451. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search