Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. F. Schneider, I. Campisi, T. Mann, J. Robb, and R. Sundelin, “Thermal Performance of a Cryounit”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G27, pp. XX-XX.
[n] M. Verderi et al., “PEPITES: an ultra-thin beam profiler with wide dynamic range for charged particle beams”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 521-524. doi:10.18429/JACoW-IBIC2025-TUPMO24
[n] P. Boonpornprasert et al., “Extension of the PITZ Facility for a Proof-of-Principle Experiment on THz SASE FEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 38-40. doi:10.18429/JACoW-FEL2019-TUP001
[n] L. Hagge et al., “Engineering Documentation and Asset Management for the European XFEL Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3960-3962. doi:10.18429/JACoW-IPAC2017-THPAB104
[n] Y. Yamaguchi, Y. Abe, F. Suzaki, and M. Wakasugi, “Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper FRYAUD01, pp. 182-186.
[n] A. Almomani, M. Droba, I. Hofmann, and U. Ratzinger, “Post Acceleration of Laser-generated Proton Bunches by a CH-DTL”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB006, pp. 852-854.
[n] S. Zimmermann et al., “Detector Control System for the ATLAS Muon Spectrometer And Operational Experience After The First Year of LHC Data Taking”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMN014, pp. 267-270.
[n] K. Yanagida, H. Hanaki, and S. Suzuki, “Fifth-Order Moment Correction for Beam Position and Second-Order Moment Measurement”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 876-878. doi:10.18429/JACoW-LINAC2016-THPLR015
[n] M. S. Mohan, “A General Device Driver Simulator to Help Compare Real Time Control Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS030, pp. 863-866.
[n] A. Almomani and U. Ratzinger, “Status and First Measurement Results for a High Gradient CH-Cavity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3724-3726. doi:10.18429/JACoW-IPAC2015-THPF019
[n] G. Bienvenu, J. C. Bourdon, P. Brunet, and J. Rodier, “Accelerating Structure Developments for the LEP Injector Linacs (LIL)”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRQ0003, pp. 463-465.
[n] L. Lilje, “Performance Limitations of Tesla Cavities in the Flash Accelerator and their Relation to the Assembly Process”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH155, pp. 421-423.
[n] J. B. Warren, “The TRIUMF Project”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A08, pp. XX-XX.
[n] M. H. Awida, P. Berrutti, I. V. Gonin, T. N. Khabiboulline, and V. P. Yakovlev, “Transverse Kick Analysis of SSR1 Due to Possible Geometrical Variations in Fabrication”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC043, pp. 2306-2308.
[n] L. Zhao et al., “Cavity Processing and Testing Activities at Jefferson Lab for LCLS-II Production”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 173-176. doi:10.18429/JACoW-SRF2017-MOPB050
[n] S. A. Veitzer, R. H. Cohen, A. W. Molvik, P. Stoltz, and J.-L. Vay, “A Cross-Platform Numerical Model of Ion-Wall Collisions”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAP021, pp. 1707-1708.
[n] H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
[n] R. Smythe, “A Fractional Turn Injector Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A10, pp. XX-XX.
[n] V. L. Smirnov and S. B. Vorozhtsov, “A Cyclotron Complex for Acceleration of Carbon Ions”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 467-470. doi:10.18429/JACoW-RUPAC2016-WEPSB046
[n] B. L. Beaudoin et al., “Application of Induction Module for Energy Perturbations in the University of Maryland Electron Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS001, pp. 2322-2324.
[n] L. Thorndahl, “Push-Pull Linac Pairs to Generate Two Drive Beams for CLIC Multibunch Operation”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP34, pp. 731-733.
[n] H. Wang et al., “HOM Damping Performance of JLAB SL21 Cryomodule”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE012, pp. 1104-1106.
[n] A. Yamashita, “Distributed Database in SPring-8”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP531, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- W. F. Schneider, I. Campisi, T. Mann, J. Robb, and R. Sundelin, “Thermal Performance of a Cryounit”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G27, pp. XX-XX.
- M. Verderi et al., “PEPITES: an ultra-thin beam profiler with wide dynamic range for charged particle beams”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 521-524.
- P. Boonpornprasert et al., “Extension of the PITZ Facility for a Proof-of-Principle Experiment on THz SASE FEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 38-40.
- L. Hagge et al., “Engineering Documentation and Asset Management for the European XFEL Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3960-3962.
- Y. Yamaguchi, Y. Abe, F. Suzaki, and M. Wakasugi, “Commissioning of the Rare-RI Ring at RIKEN RI Beam Factory”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper FRYAUD01, pp. 182-186.
- A. Almomani, M. Droba, I. Hofmann, and U. Ratzinger, “Post Acceleration of Laser-generated Proton Bunches by a CH-DTL”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB006, pp. 852-854.
- S. Zimmermann et al., “Detector Control System for the ATLAS Muon Spectrometer And Operational Experience After The First Year of LHC Data Taking”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMN014, pp. 267-270.
- K. Yanagida, H. Hanaki, and S. Suzuki, “Fifth-Order Moment Correction for Beam Position and Second-Order Moment Measurement”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 876-878.
- M. S. Mohan, “A General Device Driver Simulator to Help Compare Real Time Control Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS030, pp. 863-866.
- A. Almomani and U. Ratzinger, “Status and First Measurement Results for a High Gradient CH-Cavity”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3724-3726.
- G. Bienvenu, J. C. Bourdon, P. Brunet, and J. Rodier, “Accelerating Structure Developments for the LEP Injector Linacs (LIL)”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper FRQ0003, pp. 463-465.
- L. Lilje, “Performance Limitations of Tesla Cavities in the Flash Accelerator and their Relation to the Assembly Process”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH155, pp. 421-423.
- J. B. Warren, “The TRIUMF Project”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A08, pp. XX-XX.
- M. H. Awida, P. Berrutti, I. V. Gonin, T. N. Khabiboulline, and V. P. Yakovlev, “Transverse Kick Analysis of SSR1 Due to Possible Geometrical Variations in Fabrication”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC043, pp. 2306-2308.
- L. Zhao et al., “Cavity Processing and Testing Activities at Jefferson Lab for LCLS-II Production”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 173-176.
- S. A. Veitzer, R. H. Cohen, A. W. Molvik, P. Stoltz, and J.-L. Vay, “A Cross-Platform Numerical Model of Ion-Wall Collisions”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAP021, pp. 1707-1708.
- H. W. Schreuder, “Invited Paper: AGOR: Initial Beam Tests, Transport and Commissioning”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper A-01, pp. 6-11.
- R. Smythe, “A Fractional Turn Injector Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A10, pp. XX-XX.
- V. L. Smirnov and S. B. Vorozhtsov, “A Cyclotron Complex for Acceleration of Carbon Ions”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 467-470.
- B. L. Beaudoin et al., “Application of Induction Module for Energy Perturbations in the University of Maryland Electron Ring”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS001, pp. 2322-2324.
- L. Thorndahl, “Push-Pull Linac Pairs to Generate Two Drive Beams for CLIC Multibunch Operation”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP34, pp. 731-733.
- H. Wang et al., “HOM Damping Performance of JLAB SL21 Cryomodule”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE012, pp. 1104-1106.
- A. Yamashita, “Distributed Database in SPring-8”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP531, pp. XX-XX.
Back to search