JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. Paoloni, S. Bettoni, M. E. Biagini, P. Raimondi, and M. K. Sullivan, “Advances in the Studies of the Magnetic Design for the Final Focus Quadrupoles of the SuperB”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP045, pp. 238-240. 
[n]	S. Kusano, M. Tanaka, K. Furukawa, N. Kamikubota, M. Satoh, and N. Yamamoto, “The Operation Logbook System at KEKB Linac and Ring”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP528, pp. XX-XX. 
[n]	I. M. Kapchinsky, A. Lombardi, and A. Pisent, “H- Injector for ADRIA”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-71, pp. 811-813. 
[n]	S. Pei et al., “Progress on the Design and Construction of the 100 MeV / 100 kW Electron Linac for the NSC KIPT Neutron Source”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB023, pp. 222-224. 
[n]	A. Lombardi, “The New Superconducting Positive Ion Injector for the Legnaro ALPI Booster”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP30, pp. 125-127. 
[n]	Y. Jiao, Y. Cai, and A. Chao, “Transverse Emittance Reduction with Tapered Foil”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC045, pp. 2112-2114. 
[n]	T. Suwada and M. Satoh, “New Laser-Based Alignment System for the 500-m-long KEK Electron/Positron Injector Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB057, pp. 2821-2823. 
[n]	L. Zhang, “Vibration Damping Device Development for the ESRF Storage Ring Magnet Girder Assembly”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B14, pp. 2489-2494. 
[n]	S. Seletskiy et al., “Precise Beam Velocity Matching for the Experimental Demonstration of Ion Cooling With a Bunched Electron Beam”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 356-359. doi:10.18429/JACoW-NAPAC2019-TUZBB3
[n]	M. Pabst, “A Design Concept for the SNQ Alvarez Linear Accelerator for Low Emittance Growth”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper THP0021, pp. 383-385. 
[n]	G. V. Lamanna, A. Lombardi, and A. Pisent, “Test of a Radio-Frequency Quadrupole Cold Model”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA60, pp. 3522-3524. 
[n]	M. Basten et al., “Status of the First CH-Cavities for the New Superconducting CW Heavy Ion LINAC@GSI”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 886-888. doi:10.18429/JACoW-IPAC2016-MOPOY019
[n]	K. Honkavaara, B. Faatz, J. Feldhaus, S. Schreiber, R. Treusch, and M. Vogt, “FLASH: First Soft X-ray FEL Operating Two Undulator Beamlines Simultaneously”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper WEB05, pp. 635-639. 
[n]	M. Satoh, “Simultaneous Top-Up Injection Into four Storage Rings at SuperKEKB”, in Proc. IPAC'20, Caen, France, May 2020, paper MOZPLM01, pp. XX-XX. 
[n]	L. A. C. Piazza et al., “Status of the SPES Project: a Neutron Rich ISOL Facility for Re-accelerated RIBs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP077, pp. 3913-3914. 
[n]	M. Satoh, T. Suwada, and K. Furukawa, “Fast Data-Acquisition System for the Beam-Energy-Spread-Monitor”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP578, pp. XX-XX. 
[n]	J.-P. Carneiro et al., “Beam Loss Due to Misalignments, RF Jitter and Mismatch in the Fermilab Project-X 3GeV CW Linac”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP056, pp. 3868-3870. 
[n]	H. Sugimura et al., “Synchronized Timing and Control System Construction of SuperKEKB Positron Damping Ring”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 229-231. doi:10.18429/JACoW-ICALEPCS2017-TUCPL02
[n]	S. A. Belomestnykh et al., “Commissioning of the 112 MHz SRF Gun and 500 MHz Bunching Cavities for the CeC PoP Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3597-3599. doi:10.18429/JACoW-IPAC2015-WEPWI049
[n]	M. Satoh, K. Furukawa, F. Miyahara, T. Suwada, T. Kudou, and S. Kusano, “Upgrade of BPM DAQ System for SuperKEKB Injector Linac”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC033, pp. 1153-1156. 
[n]	L. Zhang, “Thermal Deformation Modelling Attempt of a Storage Ring Vacuum Vessel”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP5B13, pp. 2486-2488. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search