JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	C. Charrondi?â, M. Cabon, K. Develle, and M. Guinchard, “Ground Vibration Monitoring at CERN as Part of the International Seismic Network”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1695-1698. doi:10.18429/JACoW-ICALEPCS2017-THPHA134
[n]	A. Angelovski et al., “Pickup Design for a High Resolution Bunch Arrival Time Monitor for FLASH and XFEL”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD33, pp. 122-124. 
[n]	L. Bottura et al., “Magnet Acceptance and Allocation at the LHC Magnet Evaluation Board”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROAKI01, pp. 3739-3741. 
[n]	F. Zummack et al., “Custom Optomechanics for the Optical Synchronization System at the European XFEL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3976-3978. doi:10.18429/JACoW-IPAC2017-THPAB110
[n]	R. D. Porter, M. Liepe, J. T. Maniscalco, and V. Veshcherevich, “Sample Host Cavity Design for Measuring Flux Entry and Quench”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1149-1151. doi:10.18429/JACoW-IPAC2017-MOPVA126
[n]	E. H. R. Gaxiola et al., “Upgrade and Tests of the SPS Fast Extraction Kicker System for LHC and CNGS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT016, pp. 566-568. 
[n]	A. V. Aleksandrov et al., “Performance of the SNS Front End and Warm Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP073, pp. 3530-3532. 
[n]	K. Artoos et al., “Compatibility and Integration of a CLIC Quadrupole Nanometre-stabilization and Positioning System in a Large Accelerator Environment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB058, pp. 2824-2826. 
[n]	W. Ackermann, W. Beinhauer, H.-D. Graef, M. Krasilnikov, A. Richter, and T. Weiland, “Simulation of Particle Dynamics in Accelerators Using the Ensemble Model”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG050, pp. 3551-3553. 
[n]	T. P. Hughes, D. P. Prono, W. M. Tuzel, and J. R. Vananne, “Design of Beam Cleanup Zone for DARHT-2”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH038, pp. 3311-3313. 
[n]	A. A. Nosych and U. Iriso, “A Compact In-Air X-Ray Detector for Vertical Beam Size Measurement at ALBA”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPF10, pp. 69-72. 
[n]	B. H. Chung, K.-H. Chung, J. S. Hong, J. H. Jeon, S. K. Ko, and S. J. Noh, “Test of 700MHz, 1MW Proto-type Klystron for PEFP”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN053, pp. 2158-2160. 
[n]	Y. Nakazawa et al., “Prototype of an Inter-digital H-mode Drift-tube Linac for Muon Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 180-183. doi:10.18429/JACoW-LINAC2018-MOPO085
[n]	Z. M. Zhang et al., “Development of Intense Proton ECR Ion Sources at IMP”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUPP13, pp. 64-67. 
[n]	P. Tallerico et al., “An RF-Driven Lasertron”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-02, pp. 528-530. 
[n]	Y. M. Li, G. X. Xia, Y. Zhao, and S. J. Gessner, “Assessment of Transverse Instabilities in Proton Driven Hollow Plasma Wakefield Acceleration”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1581-1584. doi:10.18429/JACoW-IPAC2018-TUPML022
[n]	F.-J. Decker, Y. Cai, M. Sullivan, J. L. Turner, U. Wienands, and W. Kozanecki, “bit Distortions and Bumps in the PEP-II LER Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI009, pp. 389-391. 
[n]	C. E. Clayton et al., “A Betatron-Analysis Technique for Identifying Narrowband Trapped Charge within a Broadband Energy Tail in PWFA Experiments at FACET”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC38, pp. 147-149. 
[n]	H. Hama et al., “Cherenkov Ring to Observe Longitudinal Phase Space of a Low Energy Electron Beam Extracted from RF Gun”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUCNB03, pp. 79-83. 
[n]	T. Lamy, J. Angot, and C. Fourel, “Latest Developments in ECR Charge Breeders”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper WE-06, pp. 114-117. 
[n]	J. Rathke et al., “Prototyping Activities at AES for ANL-RIA and ATLAS Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP16, pp. 492-492. 
[n]	B.-S. Park and I. S. Hong, “Status and Installation Plan of RISP RFQ at Project Site”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1031-1033. doi:10.18429/JACoW-IPAC2019-MOPTS080
[n]	W. L. Chen et al., “Beam Parameter Reconstruction at the Input of LEBT of C-ADS Injector II”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 103-105. doi:10.18429/JACoW-SAP2017-MOPH32
[n]	A. D. Wu et al., “Investigation on Depth Profiling of Niobium Surface Composition and Work Function of SRF Cavities”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 779-782. doi:10.18429/JACoW-SRF2017-THPB024
[n]	K. P. Przygoda, M. K. Grecki, A. Napieralski, and T. Pozniak, “Piezo Control for Lorenz Force Detuned SC Cavities of DESY FLASH”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA053, pp. 1452-1454. 
[n]	Y. Li, Z. P. Li, W. B. Liu, and J. Peng, “XAL Applications Development for CSNS Transport Lines”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 98-100. doi:10.18429/JACoW-HB2016-MOPR018
[n]	S. D. Holmes et al., “Status and Opportunities at Project X: A Multi-MW Facility for Intensity Frontier Research”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA09, pp. 315-317. 
[n]	B. Dehning et al., “First Experience with the LHC Beam Loss Monitoring System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP034, pp. 3522-3524. 
[n]	I. Stra?í?âk, V. Chetvertkova, E. Mustafin, and M. Pavlovic, “Beam-Loss Criteria for Heavy Ion Accelerators and Activation of Different Materials”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B04, pp. 463-467. 
[n]	C. L. Chen, H.-P. Chang, C.-S. Fann, and K. L. Tsai, “A Monitoring System for TPS Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4272-4274. doi:10.18429/JACoW-IPAC2019-THPTS069
[n]	J. Roensch et al., “First Measurement Results from the Upgraded Low Energy Longgitudinal Phase Space Diagnostics at PITZ”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH038, pp. 330-333. 
[n]	S. Cohen, G. W. East, and R. W. Ellis, “Multi-Channel Magnet Power-Supply Ramp Controller for the IUCEEM ALPHA Synchrotron/Storage Ring with Channel Access”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM095, pp. 425-428. 
[n]	N. Higashi et al., “Development Status of Superconducting RF Transmission Electron Microscope”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 481-484. doi:10.18429/JACoW-IPAC2018-MOPML034
[n]	W. R. Lee, J. S. Hong, G. I. Kwon, T. G. Lee, and T. H. Tak, “Evaluation of Model Based Real Time Feedback Control System on Plasma Density”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 794-796. doi:10.18429/JACoW-ICALEPCS2017-TUPHA164
[n]	D. A. Hidas et al., “Precision Insertion Device Control and Simultaneous Monochromator Fly Scanning for NSLS-II”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 471-473. doi:10.18429/JACoW-NAPAC2019-TUPLS09
[n]	M. Ruf, L. Schmidt, U. Erlangen-Nurnberg LHFT, and S. Setzer, “Experimental Verification of Particle-in-Cell Simulation Results Concerning Capacitive Pickup Devices”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD10, pp. 65-67. 
[n]	S. Prodon, C. Bertone, M. Guinchard, and P. Minginette, “Handling and Transport of Oversized Accelerator Components and Physics Detectors”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH184, pp. 3230-3232. 
[n]	A. E. Bondarchenko et al., “Production of Intense Metal Ion Beams From ECR Ion Sources Using the MIVOC Method”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 330-332. doi:10.18429/JACoW-RUPAC2016-TUPSA059
[n]	K. T. Tavakoli et al., “Mechanical Engineering Solutions for COXINEL Project”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 299-303. doi:10.18429/JACoW-MEDSI2016-WECA06
[n]	R. Ferdinand et al., “SPIRAL2 Injector Commissioning”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 790-793. doi:10.18429/JACoW-LINAC2018-THPO047
[n]	C. Xu, B. Dehning, F. S. Domingues Sousa, and E. Griesmayer, “Diamond Monitor Based Beam Loss Measurements in the LHC”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 82-85. doi:10.18429/JACoW-IBIC2016-MOPG19
[n]	E. I. Simakov et al., “Results of the New High Power Tests of Superconducting Photonic Band Gap Structure Cells”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC33, pp. 850-852. 
[n]	J. H. Martin, D. Jovanovic, L. G. Lewis, E. G. Pewitt, W. Praeg, and V. J. Sevcik, “Zero Gradient Synchrotron Coil Failures in 1970-71 Analysis and Subsequent Remedial Action”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 729-731. 
[n]	S. Papadopoulos et al., “Sub-micro-Tesla Magnetic Shielding Design for Cryomodules in the High-gradient Program at CERN”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 278-282. doi:10.18429/JACoW-SRF2017-MOPB090
[n]	T. Yorita et al., “Developments of Ion Sources, LEBT and Injection Systems for Cyclotrons at RCNP”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 190-192. doi:10.18429/JACoW-Cyclotrons2016-TUP11
[n]	A. Macridin, J. F. Amundson, A. V. Burov, P. Spentzouris, and E. G. Stern, “Particle Tracking Simulation of Collective Modes - Parametric Landau Damping Off Coupling Resonance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3137-3139. doi:10.18429/JACoW-IPAC2018-THPAF069
[n]	S. A. Nikitin et al., “Record-high Resolution Experiments on Comparison of Spin Precession Frequencies of Electron Bunches Using the Resonant Depolarization Technique in the Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOBFI03, pp. 2787-2789. 
[n]	M. Ludwig, J. A. R. Arroyo Garcia, M. Bengulescu, B. Farnham, P. G. J. Gonzalez Jimenez, and F. Varela, “Developing and Validating OPC-UA Based Industrial Controls for Power Supplies at CERN”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 35-37. doi:10.18429/JACoW-PCaPAC2018-WEP04
[n]	E. Marin, A. Latina, J. Pfingstner, D. Schulte, and R. Tomas, “Tuning of CLIC-Final Focus System 3 TeV Baseline Design Under Static and Dynamic Imperfections”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 196-199. doi:10.18429/JACoW-IPAC2018-MOPMF043
[n]	M. E. Angoletta, M. Ludwig, N. Madsen, O. Marqversen, and F. Pedersen Geneva, “Real-Time Tune Measurements on the CERN Antiproton Decelerator”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS01, pp. XX-XX. 
[n]	J. N. Bai, K. Aulenbacher, J. Diefenbach, F. Fichtner, P. Echevarria, and R. G. Heine, “MESA - Status of the Implementation of the MicroTCA.4-based LLRF Control System”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 691-694. doi:10.18429/JACoW-LINAC2018-THPO007
[n]	K. Takayama et al., “KEK Digital Accelerator for Material and Biological Sciences”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC052, pp. 576-578. 
[n]	S. A. Litvinov, A. Dolinskii, H. Geissel, F. Nolden, M. Steck, and H. Weick, “The Isochronous Mode of the Collector Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS054, pp. 1618-1620. 
[n]	Y. Kang, G. Decker, and J. Song, “Damping Spurious Harmonic Resonances in the APS Storage Ring Beam Chamber”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP61, pp. 3092-3094. 
[n]	A. Bogomyagkov, S. A. Nikitin, I. B. Nikolaev, A. G. Shamov, A. N. Skrinsky, and G. M. Tumaikin, “Central Mass Energy Determination in High Precision Experiments on VEPP-4M”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOOBKI01, pp. 63-65. 
[n]	P. Sp?ñdtke, H. Emig, K. D. Leible, C. M??hle, H. Reich, and B. H. Wolf, “Ion Sources for the New High Current Injector at GSI”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4052, pp. 884-886. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search