Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Favourites
For Word
[n] A. Grudiev and W. Wuensch, “A Newly Designed and Optimized CLIC Main Linac Accelerating Structure”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper THP72, pp. 779-781.
[n] M. E. Schulze, “Commissioning Results of the LLUMC Beam Switchyard and Gantry”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 610-613.
[n] H. J. Qian, J. D. Good, C. Koschitzki, M. Krasilnikov, and F. Stephan, “Beyond Uniform Ellipsoidal Laser Shaping for Beam Brightness Improvements at PITZ”, in Proc. FLS'18, Shanghai, China, Mar. 2018, pp. 146-149. doi:10.18429/JACoW-FLS2018-WEP2PT034
[n] Y. Petenev et al., “Precise Measurement of Small Currents at the MLS”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 118-121. doi:10.18429/JACoW-IBIC2018-MOPC03
[n] H. Sakai et al., “Development of Input Power Coupler for ERL Main Linac in Japan”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO047, pp. 684-688.
[n] R. Klein, R. Thornagel, and G. Ulm, “BESSY II Operated as a Primary Source Standard”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THOBLH03, pp. 273-275.
[n] M. Sapinski et al., “LHC Magnet Quench Test with Beam Loss Generated by Wire Scan”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC173, pp. 2391-2393.
[n] R. Niemczyk et al., “Proof-of-Principle Tests for Slit-scan-based Slice Emittance Measurements at PITZ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 553-556. doi:10.18429/JACoW-LINAC2018-TUPO098
[n] A. Facco and V. Zviagintsev, “Study on Beam Steering in Intermediate-β Superconducting Quarter Wave Resonators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH136, pp. 1095-1097.
[n] H. J. Kim et al., “SUPERCONDUCTING LINAC FOR THE RISP”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP008, pp. 89-91.
[n] L. S. Nadolski et al., “SOLEIL Status Report”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4516-4519. doi:10.18429/JACoW-IPAC2018-THPMK092
[n] J. Wu, R. A. Bosch, B. Jia, A. A. Lutman, and J. J. Welch, “The Imperfectness of Electron Bunch Initial Longitudinal Phase Space on a Seeded Free Electron Laser Performance”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOPB27, pp. 87-90.
[n] T. Kubo et al., “Multipactor Simulations in 650 MHz Superconducting Spoke Cavity for an Electron Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2161-2163. doi:10.18429/JACoW-IPAC2016-WEPMB018
[n] E. Lecorche et al., “A Small but Efficient Collaboration for the Spiral2 Control System Development”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOBAB01, pp. 498-501.
[n] M. J. Grabski et al., “NEG Thin Film Coating Development for the MAX IV Vacuum System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI044, pp. 3385-3387.
[n] G. L. Arduini et al., “LEP1 Operation, 1989-1995”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOO02A, pp. 286-288.
[n] D. Sanders, S. Sampayan, R. Neurath, and M. Krogh, “Evaluation of Target Options for Advanced Radiography Facilities”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP161, pp. 2611-2613.
[n] G. De Ninno et al., “The Elettra Storage-Ring Free-Electron Laser: a Source for FEL Studies and User Experiments”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper TUOAI2, pp. 188-188.
[n] B. A. Allen et al., “Progress in Experimental Study of Current Filamentation Instability”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP126, pp. 1719-1721.
[n] G. Verri, “Visions of Antiquity: Scientific Imaging to Reveal the Original Appearance of Ancient Greek and Roman Sculpture”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper FRKG001, unpublished.
[n] R. Pan et al., “Electro-0ptical Bunch Profile Measurement at CTF3”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPME077, pp. 658-660.
[n] A. Khan, O. Boine-Frankenheim, and C. P. Stoll, “Space Charge and Microbunching Studies for the Injection Arc of MESA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3221-3224. doi:10.18429/JACoW-IPAC2018-THPAK008
[n] A. Fabris et al., “Operational experience with the FERMI@Elettra S-band RF System”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB083, pp. 369-371.
[n] N. Hubert et al., “SOLEIL Beam Stability Status”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME001, pp. 2917-2919.
[n] S. Matsuba, Y. Honda, and T. Miyajima, “Deflecting Cavity for Bunch Length Diagnostics at Compact ERL Injector”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE002, pp. 951-953.
[n] A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
[n] I. V. Bazarov, L. Cultrera, C. M. Gulliford, H. Lee, H. K. Fung, and J. M. Maxson, “Single Photoemitter Tips in a DC Gun: Limiting Aberration-induced Emittance”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1622-1625. doi:10.18429/JACoW-IPAC2017-TUPAB128
[n] A. V. Shemyakin, C. M. Bhat, D. R. Broemmelsiek, A. V. Burov, and M. Hu, “Cooling in a Compound Bucket”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP06, pp. 171-174.
[n] R. A. Richardson and T. L. Houck, “Roll Bar X-ray Spot Size Measurement Technique”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4063, pp. 908-910.
[n] M. C. Ross, “Industrialization of the ILC Project”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEIB202, pp. 2105-2109.
[n] R. Takai et al., “Beam Profile Measurement during Top-up Injection with a Pulsed Sextupole Magnet”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD03, pp. 305-307.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Grudiev and W. Wuensch, “A Newly Designed and Optimized CLIC Main Linac Accelerating Structure”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper THP72, pp. 779-781.
- M. E. Schulze, “Commissioning Results of the LLUMC Beam Switchyard and Gantry”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 610-613.
- H. J. Qian, J. D. Good, C. Koschitzki, M. Krasilnikov, and F. Stephan, “Beyond Uniform Ellipsoidal Laser Shaping for Beam Brightness Improvements at PITZ”, in Proc. 60th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'18), Shanghai, China, Mar. 2018, pp. 146-149.
- Y. Petenev et al., “Precise Measurement of Small Currents at the MLS”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 118-121.
- H. Sakai et al., “Development of Input Power Coupler for ERL Main Linac in Japan”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO047, pp. 684-688.
- R. Klein, R. Thornagel, and G. Ulm, “BESSY II Operated as a Primary Source Standard”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THOBLH03, pp. 273-275.
- M. Sapinski et al., “LHC Magnet Quench Test with Beam Loss Generated by Wire Scan”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC173, pp. 2391-2393.
- R. Niemczyk et al., “Proof-of-Principle Tests for Slit-scan-based Slice Emittance Measurements at PITZ”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 553-556.
- A. Facco and V. Zviagintsev, “Study on Beam Steering in Intermediate-β Superconducting Quarter Wave Resonators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH136, pp. 1095-1097.
- H. J. Kim et al., “SUPERCONDUCTING LINAC FOR THE RISP”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP008, pp. 89-91.
- L. S. Nadolski et al., “SOLEIL Status Report”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4516-4519.
- J. Wu, R. A. Bosch, B. Jia, A. A. Lutman, and J. J. Welch, “The Imperfectness of Electron Bunch Initial Longitudinal Phase Space on a Seeded Free Electron Laser Performance”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOPB27, pp. 87-90.
- T. Kubo et al., “Multipactor Simulations in 650 MHz Superconducting Spoke Cavity for an Electron Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2161-2163.
- E. Lecorche et al., “A Small but Efficient Collaboration for the Spiral2 Control System Development”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUCOBAB01, pp. 498-501.
- M. J. Grabski et al., “NEG Thin Film Coating Development for the MAX IV Vacuum System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI044, pp. 3385-3387.
- G. L. Arduini et al., “LEP1 Operation, 1989-1995”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOO02A, pp. 286-288.
- D. Sanders, S. Sampayan, R. Neurath, and M. Krogh, “Evaluation of Target Options for Advanced Radiography Facilities”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP161, pp. 2611-2613.
- G. De Ninno et al., “The Elettra Storage-Ring Free-Electron Laser: a Source for FEL Studies and User Experiments”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper TUOAI2, pp. 188-188.
- B. A. Allen et al., “Progress in Experimental Study of Current Filamentation Instability”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP126, pp. 1719-1721.
- G. Verri, “Visions of Antiquity: Scientific Imaging to Reveal the Original Appearance of Ancient Greek and Roman Sculpture”, presented at the 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, paper FRKG001, unpublished.
- R. Pan et al., “Electro-0ptical Bunch Profile Measurement at CTF3”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPME077, pp. 658-660.
- A. Khan, O. Boine-Frankenheim, and C. P. Stoll, “Space Charge and Microbunching Studies for the Injection Arc of MESA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3221-3224.
- A. Fabris et al., “Operational experience with the FERMI@Elettra S-band RF System”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB083, pp. 369-371.
- N. Hubert et al., “SOLEIL Beam Stability Status”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME001, pp. 2917-2919.
- S. Matsuba, Y. Honda, and T. Miyajima, “Deflecting Cavity for Bunch Length Diagnostics at Compact ERL Injector”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE002, pp. 951-953.
- A. Rossi, I. Collins, J. R. Knaster, P. Lepeule, and R. Veness, “Vacuum Calculations for the LHC Experimental Beam Chambers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH129, pp. 3153-3155.
- I. V. Bazarov, L. Cultrera, C. M. Gulliford, H. Lee, H. K. Fung, and J. M. Maxson, “Single Photoemitter Tips in a DC Gun: Limiting Aberration-induced Emittance”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1622-1625.
- A. V. Shemyakin, C. M. Bhat, D. R. Broemmelsiek, A. V. Burov, and M. Hu, “Cooling in a Compound Bucket”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper THAP06, pp. 171-174.
- R. A. Richardson and T. L. Houck, “Roll Bar X-ray Spot Size Measurement Technique”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4063, pp. 908-910.
- M. C. Ross, “Industrialization of the ILC Project”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEIB202, pp. 2105-2109.
- R. Takai et al., “Beam Profile Measurement during Top-up Injection with a Pulsed Sextupole Magnet”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD03, pp. 305-307.
Back to search