Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] L. R. Turner and L. Kettunen, “A New 3-D Integral Code for Computation of Accelerator Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2140-2143.
[n] F. Willeke, “A B-Factory in the PETRA Tunnel”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 135-138.
[n] I. S. Uzun and M. G. Abbott, “CERN Open Hardware Experience: Upgrading the Diamond Fast Archiver”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 901-904. doi:10.18429/JACoW-ICALEPCS2015-WEPGF089
[n] P. Wanderer et al., “Experiments with All-Kapton Insulation and Axial Prestress in 1.8 m-long SSC R&D Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2164-2167.
[n] N. Y. Joshi, S. T. Boogert, F. J. Cullinan, and A. Lyapin, “Position Determination of Closely Spaced Bunches using Cavity BPMs”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC164, pp. 1419-1421.
[n] D. Naito, Y. Honda, T. Miyajima, and N. Yamamoto, “Production and Performance Evaluation of a Compact Deflecting Cavity to Measure the Bunch Length in the cERL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1023-1026. doi:10.18429/JACoW-IPAC2021-MOPAB330
[n] D. Xu et al., “Closing crab dispersion by dispersive RF cavity in Electron-Ion Collider Hadron Storage Ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 112-115. doi:10.18429/JACoW-IPAC2023-MOPA040
[n] H.-D. Nuhn, R. Boyce, R. Gould, H. Winick, R. Yotam, and B. Youngman, “A 5 GeV Injector for PEP”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1217-1220.
[n] E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
[n] Z. K. Liu et al., “RF Data Acquisition and Soft Alarm System for the Taiwan Photon Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4039-4041. doi:10.18429/JACoW-IPAC2019-THPRB093
[n] P. Chu et al., “XAL Adoption Experience at LCLS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP012, pp. 117-119.
[n] H. Hassanzadegan et al., “BCM System Optimization for ESS Beam Commissioning through the DTL Tank4”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 277-280. doi:10.18429/JACoW-IBIC2023-TUP038
[n] M. V. Lalayan et al., “Layout of the PITZ Transverse Deflecting System for Longitudinal Phase Space and Slice Emittance Measurements”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP011, pp. 416-418.
[n] H. Shaker and F. Ghasemi, “Design of a Pi/2 Mode S-Band Low Energy TW Electron Linear Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC009, pp. 80-82.
[n] A. D. McInturff et al., “The Design, Construction, and Operation Update of the ISABELLER Ring Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3899-3903.
[n] A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3131-3134.
[n] Y. Luo et al., “Optimizing the design tunes of the electron storage ring of the Electron-Ion Collider”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 128-131. doi:10.18429/JACoW-IPAC2023-MOPA047
[n] K. Tsumaki, K. Fukami, T. Watanabe, S. Itakura, and N. Kumagai, “Design of a BeamTransport Line from the SACLA Linac to the SPring-8 Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC030, pp. 2975-2977.
[n] Y. Luo et al., “Simulation test of various crab dispersion closure bumps for the hadron storage ring of the Electron-Ion Collider”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 120-123. doi:10.18429/JACoW-IPAC2023-MOPA045
[n] M. E. Inman et al., “Development and Scale-Up of an HF Free Electropolishing Process in Single-Cell Niobium SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO017, pp. 397-400.
[n] J. L. Belmont, J. M. De Conto, A. Fontenille, G. Hadinger, M. Laamyem, and R. Meunier, “An Experimental Method of Aberration Correction for High Resolution Mass Spectrometers”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP05D, pp. 2312-2314.
[n] F. Willeke and F. Zimmerman, “The Impact of Persistent Current Field Errors on the Stability of the Proton Beam in the HERA Proton Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2483-2488.
[n] C. M. Bhat and J. Marriner, “Intrabeam Scattering in the Fermilab Antiproton Accumulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1773-1776.
[n] F. Toufexis, J. Neilson, and S. G. Tantawi, “Coupling and Polarization Control in a mm-wave Undulator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1647-1650. doi:10.18429/JACoW-IPAC2017-TUPAB136
[n] O. Chimalpopoca et al., “Engineering, Manufacturing and Validation of Microwave Thermionic Electron Gun for Advanced Photon Source Upgrade”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA022, unpublished.
[n] F. Mako, A. Fisher, C. W. Roberson, N. Rostoker, and D. Tzach, “Collective Ion Acceleration Controlled by a Gas Gradient”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4199-4202.
[n] P. Wanderer et al., “Test of Two 1.8 M SSC Model Magnets with Iterated Design”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 497-500.
[n] G. Machicoane et al., “Recent Advance in ECR Ion Sources”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 31-36. doi:10.18429/JACoW-NAPAC2019-MOYBB2
[n] F. R. Holdener et al., “Test Results of Pre-Production Prototype Distributed Ion Pump Design for the PEP-II Asymmetric B-Factory Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP12, pp. 2064-2066.
[n] X. Wu, R. C. York, A. Faltens, D. Judd, and E. Lee, “Design and Simulation Studies of a One-Tenth Scale Final Focus System for Heavy Ion Fusion”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P015, pp. 195-197.
[n] S. H. Kim, K. Kim, K. M. Thompson, and L. R. Turner, “Design and Tests of the Injector Synchrotron Magnets for the 7-GeV Advanced Photon Source”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2808-2811.
[n] W. Wang, H. T. H, X. Y. He, and D. R. Xu, “Alignment and Installation for the FELiChEM project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4977-4979. doi:10.18429/JACoW-IPAC2018-THPML127
[n] A. Ferrero Colomo et al., “Performance Validation of the Existing and Upgraded PS Injection Kicker”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3994-3997. doi:10.18429/JACoW-IPAC2019-THPRB078
[n] S. Srichan, Ch. Dhammatong, P. Klysubun, V. Sooksrimuang, K. Takkrathoke, and A. Tong-on, “Operation of SLRI Cryogenic System for a 6.5 T Superconducting Wavelength Shifter”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2765-2767. doi:10.18429/JACoW-IPAC2014-WEPRI113
[n] M. M. Paoluzzi et al., “The New 1-18 MHz Wideband RF System for the CERN PS Booster”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3063-3065. doi:10.18429/JACoW-IPAC2019-WEPRB107
[n] S. Adam and W. Joho, “Setting Up the SIN 590 MeV Ring Cyclotron for Single Turn Extraction”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-14, pp. 2358-2361.
[n] A. Blednykh and H. Henke, “A HOM Damped Planar Accelerating Structure”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF012, pp. 982-984.
[n] T. Kramer et al., “Deployment and Commissioning of the CERN PS Injection Kicker System for Operation with 2 GeV Beams in Short Circuit Mode”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4489-4492. doi:10.18429/JACoW-IPAC2021-THPAB354
[n] S. H. Kim, Z. A. Conway, M. P. Kelly, P. N. Ostroumov, and E. Burkhardt, “Measurement of a Superconducting Solenoid with Applications to Low-beta SRF Cryomodules”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC05, pp. 796-798.
[n] F. J. Decker, R. Pennacchi, R. Stege, and J. Turner, “Characterizing Transverse Beam Jitter in the SLC Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP13H, pp. 457-459.
[n] E. Bleser et al., “Magnetic Field Measurements on ISABELLE Storage Ring Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3903-3907.
[n] D. Xu et al., “Beam optics update for EIC HSR-IR2”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 116-119. doi:10.18429/JACoW-IPAC2023-MOPA041
[n] U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
[n] C. M. Bhat, P. S. Martin, and A. D. Russell, “Design of the MI40 Beam-Abort Dump”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR02, pp. 1903-1905.
[n] F. J. Decker, D. Farkas, L. Rinolfi, and J. Truher, “Reducing Energy Spread for Long Bunch Train at SLAC”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP124G, pp. 828-830.
[n] V. G. Khachatryan, V. H. Petrosyan, and A. Sargsyan, “Radiation Safety Considerations for Areal Electron Linac With Beam Diagnostic System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1647-1649. doi:10.18429/JACoW-IPAC2014-TUPRI039
[n] H. Henke, “Charge Passing Off-Axis through a Cylindrical Resonator with Beam Pipes”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2335-2338.
[n] R. Burge and R. Vader, “A Beam Phase Measuring System for the TRIUMF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-04, pp. 593-595.
[n] D. Rees, “Design of 250-MW CW RF System for APT”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9C003, pp. 2889-2893.
[n] T. Higo et al., “High Gradient Study at KEK on X-Band Accelerator Structure for Linear Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT009, pp. 1162-1164.
[n] H. O. Moser and C. Z. Diao, “Analytical and Numerical Study of Superconducting Miniundulators”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP14019, pp. XX-XX.
[n] J. J. Song et al., “Deep X-Ray Lithography Fabrication of mmWave Cavities at the Advanced Photon Source”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4081, pp. 953-955.
For LaTeX
Use Complete Form
For BibTeX
References
- L. R. Turner and L. Kettunen, “A New 3-D Integral Code for Computation of Accelerator Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2140-2143.
- F. Willeke, “A B-Factory in the PETRA Tunnel”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 135-138.
- I. S. Uzun and M. G. Abbott, “CERN Open Hardware Experience: Upgrading the Diamond Fast Archiver”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 901-904.
- P. Wanderer et al., “Experiments with All-Kapton Insulation and Axial Prestress in 1.8 m-long SSC R&D Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2164-2167.
- N. Y. Joshi, S. T. Boogert, F. J. Cullinan, and A. Lyapin, “Position Determination of Closely Spaced Bunches using Cavity BPMs”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC164, pp. 1419-1421.
- D. Naito, Y. Honda, T. Miyajima, and N. Yamamoto, “Production and Performance Evaluation of a Compact Deflecting Cavity to Measure the Bunch Length in the cERL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1023-1026.
- D. Xu et al., “Closing crab dispersion by dispersive RF cavity in Electron-Ion Collider Hadron Storage Ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA040, pp. 112-115.
- H.-D. Nuhn, R. Boyce, R. Gould, H. Winick, R. Yotam, and B. Youngman, “A 5 GeV Injector for PEP”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1217-1220.
- E. L. Wright and H. P. Bohlen, “Modeling and Simulation Results of High-power HOM IOTs”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH167, pp. 0-3645.
- Z. K. Liu et al., “RF Data Acquisition and Soft Alarm System for the Taiwan Photon Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4039-4041.
- P. Chu et al., “XAL Adoption Experience at LCLS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP012, pp. 117-119.
- H. Hassanzadegan et al., “BCM System Optimization for ESS Beam Commissioning through the DTL Tank4”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP038, pp. 277-280.
- M. V. Lalayan et al., “Layout of the PITZ Transverse Deflecting System for Longitudinal Phase Space and Slice Emittance Measurements”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP011, pp. 416-418.
- H. Shaker and F. Ghasemi, “Design of a Pi/2 Mode S-Band Low Energy TW Electron Linear Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC009, pp. 80-82.
- A. D. McInturff et al., “The Design, Construction, and Operation Update of the ISABELLER Ring Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3899-3903.
- A. Faltens and S. S. Rosenblum, “Investigation of Re-X Glass Ceramic for Accelerator Insulating Columns”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3131-3134.
- Y. Luo et al., “Optimizing the design tunes of the electron storage ring of the Electron-Ion Collider”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA047, pp. 128-131.
- K. Tsumaki, K. Fukami, T. Watanabe, S. Itakura, and N. Kumagai, “Design of a BeamTransport Line from the SACLA Linac to the SPring-8 Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC030, pp. 2975-2977.
- Y. Luo et al., “Simulation test of various crab dispersion closure bumps for the hadron storage ring of the Electron-Ion Collider”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA045, pp. 120-123.
- M. E. Inman et al., “Development and Scale-Up of an HF Free Electropolishing Process in Single-Cell Niobium SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO017, pp. 397-400.
- J. L. Belmont, J. M. De Conto, A. Fontenille, G. Hadinger, M. Laamyem, and R. Meunier, “An Experimental Method of Aberration Correction for High Resolution Mass Spectrometers”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP05D, pp. 2312-2314.
- F. Willeke and F. Zimmerman, “The Impact of Persistent Current Field Errors on the Stability of the Proton Beam in the HERA Proton Ring”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2483-2488.
- C. M. Bhat and J. Marriner, “Intrabeam Scattering in the Fermilab Antiproton Accumulator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1773-1776.
- F. Toufexis, J. Neilson, and S. G. Tantawi, “Coupling and Polarization Control in a mm-wave Undulator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1647-1650.
- O. Chimalpopoca et al., “Engineering, Manufacturing and Validation of Microwave Thermionic Electron Gun for Advanced Photon Source Upgrade”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA022, unpublished.
- F. Mako, A. Fisher, C. W. Roberson, N. Rostoker, and D. Tzach, “Collective Ion Acceleration Controlled by a Gas Gradient”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4199-4202.
- P. Wanderer et al., “Test of Two 1.8 M SSC Model Magnets with Iterated Design”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 497-500.
- G. Machicoane et al., “Recent Advance in ECR Ion Sources”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 31-36.
- F. R. Holdener et al., “Test Results of Pre-Production Prototype Distributed Ion Pump Design for the PEP-II Asymmetric B-Factory Collider”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP12, pp. 2064-2066.
- X. Wu, R. C. York, A. Faltens, D. Judd, and E. Lee, “Design and Simulation Studies of a One-Tenth Scale Final Focus System for Heavy Ion Fusion”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P015, pp. 195-197.
- S. H. Kim, K. Kim, K. M. Thompson, and L. R. Turner, “Design and Tests of the Injector Synchrotron Magnets for the 7-GeV Advanced Photon Source”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2808-2811.
- W. Wang, H. T. H, X. Y. He, and D. R. Xu, “Alignment and Installation for the FELiChEM project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4977-4979.
- A. Ferrero Colomo et al., “Performance Validation of the Existing and Upgraded PS Injection Kicker”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3994-3997.
- S. Srichan, Ch. Dhammatong, P. Klysubun, V. Sooksrimuang, K. Takkrathoke, and A. Tong-on, “Operation of SLRI Cryogenic System for a 6.5 T Superconducting Wavelength Shifter”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2765-2767.
- M. M. Paoluzzi et al., “The New 1-18 MHz Wideband RF System for the CERN PS Booster”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3063-3065.
- S. Adam and W. Joho, “Setting Up the SIN 590 MeV Ring Cyclotron for Single Turn Extraction”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-14, pp. 2358-2361.
- A. Blednykh and H. Henke, “A HOM Damped Planar Accelerating Structure”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF012, pp. 982-984.
- T. Kramer et al., “Deployment and Commissioning of the CERN PS Injection Kicker System for Operation with 2 GeV Beams in Short Circuit Mode”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4489-4492.
- S. H. Kim, Z. A. Conway, M. P. Kelly, P. N. Ostroumov, and E. Burkhardt, “Measurement of a Superconducting Solenoid with Applications to Low-beta SRF Cryomodules”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC05, pp. 796-798.
- F. J. Decker, R. Pennacchi, R. Stege, and J. Turner, “Characterizing Transverse Beam Jitter in the SLC Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP13H, pp. 457-459.
- E. Bleser et al., “Magnetic Field Measurements on ISABELLE Storage Ring Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3903-3907.
- D. Xu et al., “Beam optics update for EIC HSR-IR2”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPA041, pp. 116-119.
- U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131.
- C. M. Bhat, P. S. Martin, and A. D. Russell, “Design of the MI40 Beam-Abort Dump”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR02, pp. 1903-1905.
- F. J. Decker, D. Farkas, L. Rinolfi, and J. Truher, “Reducing Energy Spread for Long Bunch Train at SLAC”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP124G, pp. 828-830.
- V. G. Khachatryan, V. H. Petrosyan, and A. Sargsyan, “Radiation Safety Considerations for Areal Electron Linac With Beam Diagnostic System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1647-1649.
- H. Henke, “Charge Passing Off-Axis through a Cylindrical Resonator with Beam Pipes”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2335-2338.
- R. Burge and R. Vader, “A Beam Phase Measuring System for the TRIUMF Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-04, pp. 593-595.
- D. Rees, “Design of 250-MW CW RF System for APT”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9C003, pp. 2889-2893.
- T. Higo et al., “High Gradient Study at KEK on X-Band Accelerator Structure for Linear Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT009, pp. 1162-1164.
- H. O. Moser and C. Z. Diao, “Analytical and Numerical Study of Superconducting Miniundulators”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP14019, pp. XX-XX.
- J. J. Song et al., “Deep X-Ray Lithography Fabrication of mmWave Cavities at the Advanced Photon Source”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4081, pp. 953-955.
Back to search