Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] B. G. Chidley, “RFQ1 Control and Data Acquistion System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 637-640.
[n] I. J. Gillingham et al., “Diamond's transition from VME to fieldbus based distributed control”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THCOAA04, pp. 124-126.
[n] R. J. Bakker et al., “Dynamics of the Super ACO FEL Measured with a Double Sweep Streak Camera”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP091G, pp. 739-741.
[n] R. Ferdinand et al., “SPIRAL 2 RFQ Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT076, pp. 2026-2028.
[n] Ph. Bernard et al., “Superconducting Niobium Sputter-coated Copper Cavities at 1500 MHz”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1269-1272.
[n] M. Turner et al., “Compact Ring-Based X-Ray Source With on-Orbit and on-Energy Laser-Plasma Injection”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 435-438. doi:10.18429/JACoW-NAPAC2016-TUA3CO03
[n] C. Han, Y. Gao, X. L. Guo, and P. Liu, “The Research on the Calibration of Direct-Current Current Transformers”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1280-1282. doi:10.18429/JACoW-IPAC2019-TUPMP020
[n] E. Ciapala, A. Butterworth, and E. Peschardt, “Global Voltage Control for the LEP RF System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1903-1906.
[n] T. Straumann et al., “New Controls Platform for SLAC High-Performance Systems”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 72-74. doi:10.18429/JACoW-PCAPAC2016-THHWPLCO02
[n] A. C. Paul, “Physics Design Considerations of Diagnostic X Beam Transport System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB20, pp. 485-487.
[n] P. V. Livdahl, “The Livermore MTA Project and its Influence on Modern Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper A101, pp. 5-11.
[n] I. V. Chuvilo et al., “APF Accelerating Structures for Light and Heavy Ions”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1024-1027.
[n] A. Alexander et al., “Improved modelling and characterization of the LANSCE PSR stripper foils”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1722-1725. doi:10.18429/JACoW-IPAC2024-TUPS35
[n] F. Lackner et al., “Status of the low-Z SPS slow extraction electrostatic septum development”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB058, unpublished.
[n] O. R. Sander et al., “Performance Report on the Ground Test Accelerator Radio Frequency Quadrupole”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-97, pp. 308-310.
[n] J. H. Yue, “Invitation to IBIC 2024”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper TH2I04, unpublished.
[n] L. Steder and D. Reschke, “Statistical Analysis of the 120??C Bake Procedure of Superconducting Radio Frequency Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 444-447. doi:10.18429/JACoW-SRF2019-TUP020
[n] H. G. Blosser, D. A. Johnson, R. J. Burleigh, R. C. Niemann, and J. R. Purcell, “Superconducting Cyclotrons (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-03, pp. 584-594.
[n] K. Whitham, J. Manca, E. Gower, J. Hall, M. Curtin, and P. Metty, “Acceptance Test Performance of the Rocketdyne Radio Frequency Power System”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1244-1247.
[n] M. Wake, D. Blatchley, D. A. Gross, M. Kumada, and A. V. Tollestrup, “Recent Measurement Results of Energy Doubler Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3894-3899.
[n] S. Xiong, Y. Tan, W. Man, and Y. Yang, “PLC- and SCADA-based Equipment Protection Systems for the New Beamlines at BSRF”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP516, pp. XX-XX.
[n] J. M. Schippers, “Fast Scanning Techniques for Cancer Therapy with Hadrons - a Domain of Cyclotrons”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper FRM1CIO04, pp. 410-415.
[n] W. Myers and J. Abraham, “Use of a Debuncher to Obtain Variable Energy from A Linear Accelerator Beam”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 666-670.
[n] P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
[n] C. Marchand et al., “Performances of Spiral2 Low and High Beta Cryomodules”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper WEBA04, pp. 967-972.
[n] L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 789-793. doi:10.18429/JACoW-ICALEPCS2017-TUPHA163
[n] S. R. Marques et al., “Improvements on Sirius Beam Stability”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 226-229. doi:10.18429/JACoW-IPAC2022-MOPOPT002
[n] J. Choinski, J. Miszczak, and J. Sura, “The Warsaw K=160 Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-30, pp. XX-XX.
[n] S. L. Kramer and P. Cameron, “Beam Loss Monitors for NSLS-II Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP274, pp. 621-623.
[n] T. Mitsumoto et al., “BNCT System Using 30 MeV H- Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper FRM2CCO04, pp. 430-432.
[n] D. I. Kaltchev and E. A. Perelstein, “Gain Calculation for the Synchrotron Radiation Free Electron Maser”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 626-629.
[n] E. Effinger, B. Dehning, J. E. Emery, G. Ferioli, and C. Zamantzas, “Single gain radiation tolerant LHC beam loss acquisition card”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC06, pp. 319-321.
[n] M. J. Yang, A. Marchionni, and C. S. Mishra, “Lattice Function Measurements of Fermilab Recycler Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB074, pp. 3440-3442.
[n] G. Brautti et al., “BRIC: an Electron Beam Ion Source as Charge State Breeder for Radioactive Ion Beam Facilities”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B01, pp. 1619-1621.
[n] J. Cheng and J. Zhang, “DESIGN OF BEPC-II POWER CONVERTER SYSTEM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THP026, pp. XX-XX.
[n] M. A. Tiunov et al., “5-10 MEV Industrial High Power Electron Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO039, pp. 2813-2815.
[n] B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3318-3320. doi:10.18429/JACoW-IPAC2015-WEPTY025
[n] D. Shu et al., “Conceptual Design of the Cavity Mechanical System for Cavity-Based X-Ray Free Electron Laser”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 103. doi:10.18429/JACoW-MEDSI2020-TUOA02
[n] D. Alves, C. Lannoy, N. Mounet, and T. Pieloni, “Extraction of LHC Beam Parameters from Schottky Signals”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 382-388. doi:10.18429/JACoW-HB2023-THC2I2
[n] R. Husain, R. Fielder, I. Martin, P. Burrows, and S. Wang, “Studies for single bunch and multi-bunch beam instabilities in the Diamond-II booster”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1246-1249. doi:10.18429/JACoW-IPAC2024-TUPG18
[n] A. C. Paul, “Reconstruction of Initial Beam Conditions at the Exit of the DARHT II Accelerator”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUB10, pp. 455-457.
[n] N. Madsen and J. S. Nielsen, “Laser-Cooling for Light Ion Accumulation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B13, pp. 1253-1255.
[n] T. Kramer et al., “Feasibility of kicker systems for FCC-ee and injectors”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM065, unpublished.
[n] J. M. Schippers, “RESULTS OF 3D BEAM DYNAMIC STUDIES IN DISTORTED FIELDS OF A 250 MeV SUPERCONDUCTING CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 21A3, pp. XX-XX.
[n] N. Kurita, D. Martin, S. Smith, C. Ng, M. Nordby, and C. Perkins, “Design of the Button Beam Position Monitor for PEP-II”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ25, pp. 2512-2514.
[n] M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834.
[n] L. K. Grob et al., “Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1082-1085. doi:10.18429/JACoW-IPAC2019-MOPTS094
[n] N. R. Lobanov, P. Linardakis, D. Tsifakis, and T. Tunningley, “Ultra High Impedance Diagnostics of Electrostatic Accelerators with Improved Resolution”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper THM2C01, pp. 282-284.
[n] P. Tenenbaum, H. H. Braun, and F. Chautard, “Nulling Emittance Measurement Technique for CLIC Test Facility”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8W017, pp. 479-481.
[n] P.-E. Bernaudin et al., “Results of the IPHI Drift Tube Linac's Hot Model CW Tests”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB033, pp. 2799-2801.
[n] K. Popov, A. Aryshev, N. Terunuma, and J. Urakawa, “KEK LUCX facility Laser-to-RF&RF-to-RF stability study and optimization”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper TUPV018, unpublished.
[n] F. Caspers, B. Franzke, F. Nolden, and A. Schwinn, “First Experiments on Stochastic Cooling of Heavy Ion Beams at the ESR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP39G, pp. 1052-1054.
[n] M. Siano et al., “FOCUS: Fast Monte-CarlO Approach to Coherence of Undulator Sources”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 257-260. doi:10.18429/JACoW-IBIC2022-TUP16
[n] W. Wittmer, W. S. Colocho, and G. R. White, “A Parallel Controls Software Approach for PEP II: AIDA & Matlab Middle Layer”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS058, pp. 566-568.
[n] M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
[n] W. Fan, C. Feng, and Y. Lu, “Design of an isochronous achromat using transverse gradient undulators”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC34, unpublished.
[n] K. Schindl and H. Schoenauer, “A Pulsed Spallation Source in Central Europe”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 432-435.
[n] E. I. Simakov, “X-Band Photonic Band Gap Accelerating Structures with Improved Wakefield Suppression”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 307-309. doi:10.18429/JACoW-LINAC2016-MOP106002
[n] H. Suzuki et al., “ECR Ion Source for the KEK All-ion Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC156, pp. 442-444.
[n] T. K. Charles, R. M. Bodenstein, and A. Castilla, “Need for Portable Accelerators in Cultural Heritage”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 808-810. doi:10.18429/JACoW-IPAC2022-TUOZGD1
[n] D. Domange, C. Hernalsteens, J. Uythoven, C. Wiesner, and D. Wollmann, “Criticality of powering failure of the main bend circuits in the FCC-ee at the Z-pole energy”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM022, unpublished.
[n] F. Schlander et al., “The Superconducting Accelerator for the ESS Project”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 24-28. doi:10.18429/JACoW-SRF2017-MOYA01
[n] W. A. Wurtz et al., “Upgrades to the Booster to Storage Ring Transfer Line at the Canadian Light Source”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2881-2884. doi:10.18429/JACoW-IPAC2021-WEPAB120
[n] M. Hosaka, K. Chen, T. He, and W. Xu, “Comparison of BBA methods for commissioning of fourth generation light sources”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1369-1371. doi:10.18429/JACoW-IPAC2024-TUPG54
[n] H. F. Ouyang et al., “A High-Duty Factor Radio-Frequency Quadrupole Accelerator for ADS Study in China”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4PBC03, pp. 1955-1957.
[n] C. I. Briegel et al., “ACSys in a Box”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMU039, pp. 522-524.
[n] A. V. Savilov, I. V. Bandurkin, V. L. Bratman, A. K. Kaminsky, N. Yu. Peskov, and S. N. Sedykh, “Terahertz Electron Masers with Frequency Multiplication”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC77, pp. 420-423.
[n] T. A. Trainor, E. G. Adelberger, W. B. Ingalls, and H. E. Swanson, “A Comparison of Sona and Spin-Filter Polarization Schemes for a Lamb-Shift Polarized Ion Source”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1527-1530.
[n] F. Lackner et al., “A novel approach to qualify the straightness of electrostatic septa for the SPS slow extraction”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB057, unpublished.
[n] R. Martinie et al., “Cooling and thermomechanical studies for the impact tattoos beam dump design”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2522-2525. doi:10.18429/JACoW-IPAC2023-TUPM126
[n] Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Architecture for Improving Software Reliability in Collider-Accelerator Control Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1261-1265. doi:10.18429/JACoW-ICALEPCS2017-THMPL03
[n] B. N. Merh, R. K. Agrawal, K. G. Barpande, P. Fatnani, and C. P. Navathe, “API Manager Implementation and its Use for Indus Accelerator Control”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD17, pp. 175-177.
[n] C.-K. Ng, R. J. England, R. J. Noble, and J. E. Spencer, “Simulation of Power Coupling and Wakefield in Photonic Bandgap Fibers for Dielectric Laser Acceleration”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC31, pp. 135-137.
[n] S. Kashiwagi et al., “Development of a conduction cooling system for S-band niobium-tin superconducting RF cavities using cryocoolers”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB051, unpublished.
[n] T. Akagi et al., “Development of an Optical Cavity for LCS Sources at the Compact ERL”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1204-1206. doi:10.18429/JACoW-NAPAC2016-THPOA50
[n] J. M. Schippers, “Accelerators for Medical Application: What Is So Special”, presented at the Cyclotrons'22, Beijing, China, Dec. 2022, paper THBO04, unpublished.
[n] T. Thuillier et al., “Challenges and Prospects of Electron Cyclotron Resonance Charge Breeding”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 14-19. doi:10.18429/JACoW-ECRIS2018-MOC1
[n] C. Henkel, W. Hillert, V. Miltchev, and K. Floettmann, “Design Studies of an S-Band Multipacting Electron Gun”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4759-4762. doi:10.18429/JACoW-IPAC2018-THPML054
[n] T. Tan, M. A. Wolak, X. Xi, L. Civale, and T. Tajima, “Increase in Vortex Penetration Field on Nb Ellipsoid Coated With a MbB2 Thin Film”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUBA06, pp. 512-515.
[n] B. Odegard, D. Stuart, and P. Freeman, “Development of a Modular X-ray Detector for Beamline Diagnostics at Los Alamos National Lab”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA008, unpublished.
[n] O. A. Shevchenko et al., “The VUV/UV OK-5 Duke Storage Ring FEL with Variable Polarization”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH330, pp. 2833-2835.
[n] J. C. Juillard and E. Peschardt, “Damping of Longitudinal Coupled Dipole Bunch Oscillations in LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1554-1557.
[n] R. W. Castor and J. Abraham, “Performance Characteristics of the Zero Gradient Synchrotron Linac Automatic Gradient Stabilizer”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper II-07, pp. 78-82.
[n] J. Willard, “A High Current Electron Gun Suitable for Use Down to 1 Nanosecond Pulse Length”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 87-93.
[n] A. Piwinski, “Satellite Resonances due to Beam-Beam Interaction”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1408-1411.
[n] M. Bieler et al., “Thin Film Cathode for a Hollow Beam Gun”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 670-673.
[n] S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
[n] G. Velev et al., “A Conceptual Design of the 2+ MW LBNE Beam Absorber”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP297, pp. 2041-2043.
[n] Ph. Bernard, A. Chincarini, G. Gemme, R. Parodi, and E. Picasso, “RFSC Cavities for the Detection of Gravitational Waves: Recent Updates and Future Trends”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ001, pp. XX-XX.
[n] M. Kobal, D. Golob, T. Kusterle, M. Pelko, M. Plesko, and A. Podborsek, “High-voltage Power Supply Distribution System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP146, pp. 3708-3710.
[n] A. Bellandi et al., “Overview of CW R&D With a European XFEL Cryomodule”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPFAV001, pp..
[n] O. J. Mokone and T. Gatsi, “Controlling Camera and PDU”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 743-745. doi:10.18429/JACoW-ICALEPCS2015-WEPGF023
[n] M. H. Cho et al., “Status of PLS 2-GeV Electron Linac Performance”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4024, pp. 445-447.
[n] T. Shibata et al., “The leakage field of the new high-field septum magnets for fast extraction in Main Ring of J-PARC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2459-2462. doi:10.18429/JACoW-IPAC2023-TUPM103
[n] N. U. Saqib and F. Sher, “Virtualized Control System Infrastructure at LINAC Project, PINSTECH”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 975-977. doi:10.18429/JACoW-ICALEPCS2021-THPV046
[n] T. Habermann, A. G?Âhl, D. Nau, G. M??ller, H. Piel, and M. Wedel, “Influence of Adsorbates and Surface Compounds on the Field Emission of Niobium”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D20, pp. 972-980.
For LaTeX
Use Complete Form
For BibTeX
References
- B. G. Chidley, “RFQ1 Control and Data Acquistion System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 637-640.
- I. J. Gillingham et al., “Diamond's transition from VME to fieldbus based distributed control”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THCOAA04, pp. 124-126.
- R. J. Bakker et al., “Dynamics of the Super ACO FEL Measured with a Double Sweep Streak Camera”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP091G, pp. 739-741.
- R. Ferdinand et al., “SPIRAL 2 RFQ Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT076, pp. 2026-2028.
- Ph. Bernard et al., “Superconducting Niobium Sputter-coated Copper Cavities at 1500 MHz”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1269-1272.
- M. Turner et al., “Compact Ring-Based X-Ray Source With on-Orbit and on-Energy Laser-Plasma Injection”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 435-438.
- C. Han, Y. Gao, X. L. Guo, and P. Liu, “The Research on the Calibration of Direct-Current Current Transformers”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1280-1282.
- E. Ciapala, A. Butterworth, and E. Peschardt, “Global Voltage Control for the LEP RF System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1903-1906.
- T. Straumann et al., “New Controls Platform for SLAC High-Performance Systems”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 72-74.
- A. C. Paul, “Physics Design Considerations of Diagnostic X Beam Transport System”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB20, pp. 485-487.
- P. V. Livdahl, “The Livermore MTA Project and its Influence on Modern Linacs”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper A101, pp. 5-11.
- I. V. Chuvilo et al., “APF Accelerating Structures for Light and Heavy Ions”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1024-1027.
- A. Alexander et al., “Improved modelling and characterization of the LANSCE PSR stripper foils”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS35, pp. 1722-1725.
- F. Lackner et al., “Status of the low-Z SPS slow extraction electrostatic septum development”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB058, this conference.
- O. R. Sander et al., “Performance Report on the Ground Test Accelerator Radio Frequency Quadrupole”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-97, pp. 308-310.
- J. H. Yue, “Invitation to IBIC 2024”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TH2I04, unpublished.
- L. Steder and D. Reschke, “Statistical Analysis of the 120??C Bake Procedure of Superconducting Radio Frequency Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 444-447.
- H. G. Blosser, D. A. Johnson, R. J. Burleigh, R. C. Niemann, and J. R. Purcell, “Superconducting Cyclotrons (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-03, pp. 584-594.
- K. Whitham, J. Manca, E. Gower, J. Hall, M. Curtin, and P. Metty, “Acceptance Test Performance of the Rocketdyne Radio Frequency Power System”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1244-1247.
- M. Wake, D. Blatchley, D. A. Gross, M. Kumada, and A. V. Tollestrup, “Recent Measurement Results of Energy Doubler Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3894-3899.
- S. Xiong, Y. Tan, W. Man, and Y. Yang, “PLC- and SCADA-based Equipment Protection Systems for the New Beamlines at BSRF”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP516, pp. XX-XX.
- J. M. Schippers, “Fast Scanning Techniques for Cancer Therapy with Hadrons - a Domain of Cyclotrons”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper FRM1CIO04, pp. 410-415.
- W. Myers and J. Abraham, “Use of a Debuncher to Obtain Variable Energy from A Linear Accelerator Beam”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 666-670.
- P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
- C. Marchand et al., “Performances of Spiral2 Low and High Beta Cryomodules”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper WEBA04, pp. 967-972.
- L. Cseppento, V. Baggiolini, E. Fejes, Zs. Kovari, and N. Stapley, “CBNG - The New Build Tool Used to Build Millions of Lines of Java Code at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 789-793.
- S. R. Marques et al., “Improvements on Sirius Beam Stability”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 226-229.
- J. Choinski, J. Miszczak, and J. Sura, “The Warsaw K=160 Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-30, pp. XX-XX.
- S. L. Kramer and P. Cameron, “Beam Loss Monitors for NSLS-II Storage Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP274, pp. 621-623.
- T. Mitsumoto et al., “BNCT System Using 30 MeV H- Cyclotron”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper FRM2CCO04, pp. 430-432.
- D. I. Kaltchev and E. A. Perelstein, “Gain Calculation for the Synchrotron Radiation Free Electron Maser”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 626-629.
- E. Effinger, B. Dehning, J. E. Emery, G. Ferioli, and C. Zamantzas, “Single gain radiation tolerant LHC beam loss acquisition card”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC06, pp. 319-321.
- M. J. Yang, A. Marchionni, and C. S. Mishra, “Lattice Function Measurements of Fermilab Recycler Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB074, pp. 3440-3442.
- G. Brautti et al., “BRIC: an Electron Beam Ion Source as Charge State Breeder for Radioactive Ion Beam Facilities”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B01, pp. 1619-1621.
- J. Cheng and J. Zhang, “DESIGN OF BEPC-II POWER CONVERTER SYSTEM”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper THP026, pp. XX-XX.
- M. A. Tiunov et al., “5-10 MEV Industrial High Power Electron Accelerator”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO039, pp. 2813-2815.
- B. D. Hartsell, K. Anderson, J. Hylen, V. I. Sidorov, and S. Tariq, “LBNF Hadron Absorber: Mechanical Design and Analysis for 2.4MW Operation”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3318-3320.
- D. Shu et al., “Conceptual Design of the Cavity Mechanical System for Cavity-Based X-Ray Free Electron Laser”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 103.
- D. Alves, C. Lannoy, N. Mounet, and T. Pieloni, “Extraction of LHC Beam Parameters from Schottky Signals”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THC2I2, pp. 382-388.
- R. Husain, R. Fielder, I. Martin, P. Burrows, and S. Wang, “Studies for single bunch and multi-bunch beam instabilities in the Diamond-II booster”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG18, pp. 1246-1249.
- A. C. Paul, “Reconstruction of Initial Beam Conditions at the Exit of the DARHT II Accelerator”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TUB10, pp. 455-457.
- N. Madsen and J. S. Nielsen, “Laser-Cooling for Light Ion Accumulation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B13, pp. 1253-1255.
- T. Kramer et al., “Feasibility of kicker systems for FCC-ee and injectors”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM065, this conference.
- J. M. Schippers, “RESULTS OF 3D BEAM DYNAMIC STUDIES IN DISTORTED FIELDS OF A 250 MeV SUPERCONDUCTING CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 21A3, pp. XX-XX.
- N. Kurita, D. Martin, S. Smith, C. Ng, M. Nordby, and C. Perkins, “Design of the Button Beam Position Monitor for PEP-II”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ25, pp. 2512-2514.
- M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834.
- L. K. Grob et al., “Dust Analysis from LHC Vacuum System to Identify the Source of Macro-Particle-Beam-Interactions”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1082-1085.
- N. R. Lobanov, P. Linardakis, D. Tsifakis, and T. Tunningley, “Ultra High Impedance Diagnostics of Electrostatic Accelerators with Improved Resolution”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper THM2C01, pp. 282-284.
- P. Tenenbaum, H. H. Braun, and F. Chautard, “Nulling Emittance Measurement Technique for CLIC Test Facility”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8W017, pp. 479-481.
- P.-E. Bernaudin et al., “Results of the IPHI Drift Tube Linac's Hot Model CW Tests”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAB033, pp. 2799-2801.
- K. Popov, A. Aryshev, N. Terunuma, and J. Urakawa, “KEK LUCX facility Laser-to-RF&RF-to-RF stability study and optimization”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper TUPV018, unpublished.
- F. Caspers, B. Franzke, F. Nolden, and A. Schwinn, “First Experiments on Stochastic Cooling of Heavy Ion Beams at the ESR”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP39G, pp. 1052-1054.
- M. Siano et al., “FOCUS: Fast Monte-CarlO Approach to Coherence of Undulator Sources”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 257-260.
- W. Wittmer, W. S. Colocho, and G. R. White, “A Parallel Controls Software Approach for PEP II: AIDA & Matlab Middle Layer”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS058, pp. 566-568.
- M. Rojak, E. Shurina, Yu. Soloveichik, A. Grudiev, M. Tiunov, and P. Vobly, “MASTAC - New Code for Solving Three-Dimensional Non-linear Magnetostatic Problems”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPB09, pp. 2291-2293.
- W. Fan, C. Feng, and Y. Lu, “Design of an isochronous achromat using transverse gradient undulators”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC34, unpublished.
- K. Schindl and H. Schoenauer, “A Pulsed Spallation Source in Central Europe”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 432-435.
- E. I. Simakov, “X-Band Photonic Band Gap Accelerating Structures with Improved Wakefield Suppression”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 307-309.
- H. Suzuki et al., “ECR Ion Source for the KEK All-ion Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC156, pp. 442-444.
- T. K. Charles, R. M. Bodenstein, and A. Castilla, “Need for Portable Accelerators in Cultural Heritage”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 808-810.
- D. Domange, C. Hernalsteens, J. Uythoven, C. Wiesner, and D. Wollmann, “Criticality of powering failure of the main bend circuits in the FCC-ee at the Z-pole energy”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM022, this conference.
- F. Schlander et al., “The Superconducting Accelerator for the ESS Project”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 24-28.
- W. A. Wurtz et al., “Upgrades to the Booster to Storage Ring Transfer Line at the Canadian Light Source”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2881-2884.
- M. Hosaka, K. Chen, T. He, and W. Xu, “Comparison of BBA methods for commissioning of fourth generation light sources”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG54, pp. 1369-1371.
- H. F. Ouyang et al., “A High-Duty Factor Radio-Frequency Quadrupole Accelerator for ADS Study in China”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4PBC03, pp. 1955-1957.
- C. I. Briegel et al., “ACSys in a Box”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMU039, pp. 522-524.
- A. V. Savilov, I. V. Bandurkin, V. L. Bratman, A. K. Kaminsky, N. Yu. Peskov, and S. N. Sedykh, “Terahertz Electron Masers with Frequency Multiplication”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC77, pp. 420-423.
- T. A. Trainor, E. G. Adelberger, W. B. Ingalls, and H. E. Swanson, “A Comparison of Sona and Spin-Filter Polarization Schemes for a Lamb-Shift Polarized Ion Source”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1527-1530.
- F. Lackner et al., “A novel approach to qualify the straightness of electrostatic septa for the SPS slow extraction”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB057, this conference.
- R. Martinie et al., “Cooling and thermomechanical studies for the impact tattoos beam dump design”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM126, pp. 2522-2525.
- Y. Gao, T. G. Robertazzi, K. A. Brown, J. Morris, and R. H. Olsen, “A New Simulation Architecture for Improving Software Reliability in Collider-Accelerator Control Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1261-1265.
- B. N. Merh, R. K. Agrawal, K. G. Barpande, P. Fatnani, and C. P. Navathe, “API Manager Implementation and its Use for Indus Accelerator Control”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD17, pp. 175-177.
- C.-K. Ng, R. J. England, R. J. Noble, and J. E. Spencer, “Simulation of Power Coupling and Wakefield in Photonic Bandgap Fibers for Dielectric Laser Acceleration”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC31, pp. 135-137.
- S. Kashiwagi et al., “Development of a conduction cooling system for S-band niobium-tin superconducting RF cavities using cryocoolers”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB051, this conference.
- T. Akagi et al., “Development of an Optical Cavity for LCS Sources at the Compact ERL”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1204-1206.
- J. M. Schippers, “Accelerators for Medical Application: What Is So Special”, presented at the 23rd Int. Conf. Cyclotrons Appl. (Cyclotrons'22), Beijing, China, Dec. 2022, paper THBO04, unpublished.
- T. Thuillier et al., “Challenges and Prospects of Electron Cyclotron Resonance Charge Breeding”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 14-19.
- C. Henkel, W. Hillert, V. Miltchev, and K. Floettmann, “Design Studies of an S-Band Multipacting Electron Gun”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4759-4762.
- T. Tan, M. A. Wolak, X. Xi, L. Civale, and T. Tajima, “Increase in Vortex Penetration Field on Nb Ellipsoid Coated With a MbB2 Thin Film”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUBA06, pp. 512-515.
- B. Odegard, D. Stuart, and P. Freeman, “Development of a Modular X-ray Detector for Beamline Diagnostics at Los Alamos National Lab”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA008, unpublished.
- O. A. Shevchenko et al., “The VUV/UV OK-5 Duke Storage Ring FEL with Variable Polarization”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH330, pp. 2833-2835.
- J. C. Juillard and E. Peschardt, “Damping of Longitudinal Coupled Dipole Bunch Oscillations in LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1554-1557.
- R. W. Castor and J. Abraham, “Performance Characteristics of the Zero Gradient Synchrotron Linac Automatic Gradient Stabilizer”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper II-07, pp. 78-82.
- J. Willard, “A High Current Electron Gun Suitable for Use Down to 1 Nanosecond Pulse Length”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 87-93.
- A. Piwinski, “Satellite Resonances due to Beam-Beam Interaction”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1408-1411.
- M. Bieler et al., “Thin Film Cathode for a Hollow Beam Gun”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 670-673.
- S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
- G. Velev et al., “A Conceptual Design of the 2+ MW LBNE Beam Absorber”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP297, pp. 2041-2043.
- Ph. Bernard, A. Chincarini, G. Gemme, R. Parodi, and E. Picasso, “RFSC Cavities for the Detection of Gravitational Waves: Recent Updates and Future Trends”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PZ001, pp. XX-XX.
- M. Kobal, D. Golob, T. Kusterle, M. Pelko, M. Plesko, and A. Podborsek, “High-voltage Power Supply Distribution System”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP146, pp. 3708-3710.
- A. Bellandi et al., “Overview of CW R&D With a European XFEL Cryomodule”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPFAV001, pp..
- O. J. Mokone and T. Gatsi, “Controlling Camera and PDU”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 743-745.
- M. H. Cho et al., “Status of PLS 2-GeV Electron Linac Performance”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4024, pp. 445-447.
- T. Shibata et al., “The leakage field of the new high-field septum magnets for fast extraction in Main Ring of J-PARC”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM103, pp. 2459-2462.
- N. U. Saqib and F. Sher, “Virtualized Control System Infrastructure at LINAC Project, PINSTECH”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 975-977.
- T. Habermann, A. G?Âhl, D. Nau, G. M??ller, H. Piel, and M. Wedel, “Influence of Adsorbates and Surface Compounds on the Field Emission of Niobium”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D20, pp. 972-980.
Back to search