Favourites
For Word
[n] E. L. Wright et al., “Test Results for a 10-MW, L-band, Multiple-beam Klystron for TESLA”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF077, pp. 1117-1119.
[n] M. N. Nguyen and R. L. Cassel, “High Power Switch for the SMTF Modulator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS044, pp. 2445-2447.
[n] P. I. Reinhardt-Nickoulin, S. Bragin, A. Feschenko, S. A. Gavrilov, I. V. Vasilyev, and O. Volodkevich, “Beam Parameters Measurements by Ionization Cross Section Monitor on Proton LINAC of INR RAS”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD49, pp. 161-163.
[n] O. Mohsen et al., “Recent Progress Toward a Conduction-Cooled Superconducting Radiofrequency Electron Gun”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1604-1607. doi:10.18429/JACoW-IPAC2021-TUPAB098
[n] D. T. Touchard et al., “The Spiral2 Command Control Software Organisation and Management.”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP014, pp. 703-705.
[n] E. B. Blum and R. Nawrocky, “Tune Measurement in the NSLS Booster Synchrotron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2246-2249.
[n] A. V. Feschenko, P. N. Ostroumov, S. A. Petronevich, and S. I. Sharamentov, “Precise Energy Measurement of the Continuous Proton Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1409-1411.
[n] N. Guillotin, J. Jacob, and V. Serriere, “Development of HOM Damped Copper Cavity for the ESRF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH099, pp. 1244-1246.
[n] A. W. Maschke, “Relativistic Heavy Ions for Fusion Applications”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1825-1826.
[n] D. Schirmer and K. Wille, “DELTA Optics”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2859-2862.
[n] S. Krinsky and J. M. Wang, “Longitudinal Instabilities of Long Gaussian Bunches”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2495-2498.
[n] P. N. Ostroumov, G. Apollinari, G. W. Foster, and R. C. Webber, “Physics Design of a Multi-GeV Superconducting H-minus Linac”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBY02, pp. 134-136.
[n] F.-J. Decker et al., “Towards Achieving the Design Number of Bunches in PEP-II”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B11, pp. 403-405.
[n] E. Pozdeyev, “First Acceleration at FRIB”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 615-619. doi:10.18429/JACoW-LINAC2018-WE2A01
[n] N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190.
[n] B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4336-4339. doi:10.18429/JACoW-IPAC2021-THPAB270
[n] V. Kamerdzhiev, J. Dietrich, F. Klehr, and K. Reimers, “Progress with the Scintillation Profile Monitor at COSY”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD51, pp. 164-166.
[n] A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2898-2901.
[n] W. A. Barletta, D. B. Cline, and C. Pellegrini, “High Luminosity BB Factories Using Novel Techniques”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 395-398.
[n] M. E. Angoletta, S. C. P. Albright, A. Findlay, M. Jaussi, J. C. Molendijk, and V. R. Myklebust, “A New Digital Low-Level RF and Longitudinal Diagnostic System for CERNÔÇÖs AD”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3966-3969. doi:10.18429/JACoW-IPAC2019-THPRB070
[n] R. Stassen, B. Breitkreutz, and N. Shurkhno, “Recent Results of HESR Original Stochastic Cooling Tanks at COSY”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 913-915. doi:10.18429/JACoW-IPAC2018-TUPAF078
[n] T. Saito, M. Inoue, A. Shimizu, H. Tamura, and I. Miura, “Aluminium RF Cavity for the RCNP Ring Cyclotron”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper J13, pp. 381-384.
[n] K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 809-814.
[n] K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
[n] N. F. Ziegler et al., “Status Report on the Oak Ridge 25 MV Tandem Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2672-2675.
[n] M. Wendt and T. Toyama, “Closing Plenary Summary of Working Group F: Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper CPL06, pp. 496-498.
[n] S. Banna, L. Schaechter, and R. H. Siemann, “Surface Roughness Effect on a Moving Bunch”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG036, pp. 1879-1881.
[n] B. Breitkreutz, R. Stassen, and H. Stockhorst, “Design of Stochastic Pick-Ups and Kickers for Low Beta Particle Beams”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 68-71. doi:10.18429/JACoW-COOL2017-TUP17
[n] E. Benedetto, I. V. Agapov, F. Follin, and V. Kain, “Fitting Algorithms for Optical and Beam Parameters in Transfer Lines with Application to the LHC Injection Line TI2”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP057, pp. 2647-2649.
[n] J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
[n] J. T. Bradley III, D. Rees, R. S. Przeklasa, and M. C. Scott, “Design, Construction and Operational Results of the IGBT Controlled Solid State Modulator High Voltage Power Supply Used in the High Power RF Systems of the Low Energy Demonstration Accelerator of the Accelerator Production of Tritium APT Project”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4071, pp. 561-563.
[n] S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309.
[n] Yu. N. Denisov, “Complex of Systems for Measuring the Characteristics and Stabilization of Static Magnetic Fields”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 482-487.
[n] J. W. Dodd et al., “SATURNUS: The UCLA Infrared Free-Election Laser Project”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2751-2754.
[n] Y. Mariette et al., “New Neutron Sensitive Beam Loss Monitor (nBLM)”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 136. doi:10.18429/JACoW-ICALEPCS2019-MOMPL008
For LaTeX
Use Complete Form
For BibTeX
References
- E. L. Wright et al., “Test Results for a 10-MW, L-band, Multiple-beam Klystron for TESLA”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF077, pp. 1117-1119.
- M. N. Nguyen and R. L. Cassel, “High Power Switch for the SMTF Modulator”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS044, pp. 2445-2447.
- P. I. Reinhardt-Nickoulin, S. Bragin, A. Feschenko, S. A. Gavrilov, I. V. Vasilyev, and O. Volodkevich, “Beam Parameters Measurements by Ionization Cross Section Monitor on Proton LINAC of INR RAS”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD49, pp. 161-163.
- O. Mohsen et al., “Recent Progress Toward a Conduction-Cooled Superconducting Radiofrequency Electron Gun”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1604-1607.
- D. T. Touchard et al., “The Spiral2 Command Control Software Organisation and Management.”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP014, pp. 703-705.
- E. B. Blum and R. Nawrocky, “Tune Measurement in the NSLS Booster Synchrotron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2246-2249.
- A. V. Feschenko, P. N. Ostroumov, S. A. Petronevich, and S. I. Sharamentov, “Precise Energy Measurement of the Continuous Proton Beam”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1409-1411.
- N. Guillotin, J. Jacob, and V. Serriere, “Development of HOM Damped Copper Cavity for the ESRF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH099, pp. 1244-1246.
- A. W. Maschke, “Relativistic Heavy Ions for Fusion Applications”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1825-1826.
- D. Schirmer and K. Wille, “DELTA Optics”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2859-2862.
- S. Krinsky and J. M. Wang, “Longitudinal Instabilities of Long Gaussian Bunches”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2495-2498.
- P. N. Ostroumov, G. Apollinari, G. W. Foster, and R. C. Webber, “Physics Design of a Multi-GeV Superconducting H-minus Linac”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUBY02, pp. 134-136.
- F.-J. Decker et al., “Towards Achieving the Design Number of Bunches in PEP-II”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B11, pp. 403-405.
- E. Pozdeyev, “First Acceleration at FRIB”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 615-619.
- N. Kuroda et al., “Development of MUSASHI, a Mono-energetic Ultra-slow Antiproton Beam Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC058, pp. 4188-4190.
- B. Naranjo et al., “Pair Spectrometer for FACET-II”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4336-4339.
- V. Kamerdzhiev, J. Dietrich, F. Klehr, and K. Reimers, “Progress with the Scintillation Profile Monitor at COSY”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD51, pp. 164-166.
- A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2898-2901.
- W. A. Barletta, D. B. Cline, and C. Pellegrini, “High Luminosity BB Factories Using Novel Techniques”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 395-398.
- M. E. Angoletta, S. C. P. Albright, A. Findlay, M. Jaussi, J. C. Molendijk, and V. R. Myklebust, “A New Digital Low-Level RF and Longitudinal Diagnostic System for CERNÔÇÖs AD”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3966-3969.
- R. Stassen, B. Breitkreutz, and N. Shurkhno, “Recent Results of HESR Original Stochastic Cooling Tanks at COSY”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 913-915.
- T. Saito, M. Inoue, A. Shimizu, H. Tamura, and I. Miura, “Aluminium RF Cavity for the RCNP Ring Cyclotron”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper J13, pp. 381-384.
- K. M. Terwilliger, “Polarized Proton Beams at the AGS”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 809-814.
- K. Jacobs et al., “Accelerator Beam Profile Measurements at the Bates Linac”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-44, pp. 424-426.
- N. F. Ziegler et al., “Status Report on the Oak Ridge 25 MV Tandem Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2672-2675.
- M. Wendt and T. Toyama, “Closing Plenary Summary of Working Group F: Diagnostics and Instrumentation for High-Intensity Beams”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper CPL06, pp. 496-498.
- S. Banna, L. Schaechter, and R. H. Siemann, “Surface Roughness Effect on a Moving Bunch”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG036, pp. 1879-1881.
- B. Breitkreutz, R. Stassen, and H. Stockhorst, “Design of Stochastic Pick-Ups and Kickers for Low Beta Particle Beams”, in Proc. 11th Workshop on Beam Cooling and Related Topics (COOL'17), Bonn, Germany, Sep. 2017, pp. 68-71.
- E. Benedetto, I. V. Agapov, F. Follin, and V. Kain, “Fitting Algorithms for Optical and Beam Parameters in Transfer Lines with Application to the LHC Injection Line TI2”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP057, pp. 2647-2649.
- J. Clark et al., “Design and Initial Operation of the ETA-II Induction Accelerator”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO2-01, pp. 19-23.
- J. T. Bradley III, D. Rees, R. S. Przeklasa, and M. C. Scott, “Design, Construction and Operational Results of the IGBT Controlled Solid State Modulator High Voltage Power Supply Used in the High Power RF Systems of the Low Energy Demonstration Accelerator of the Accelerator Production of Tritium APT Project”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4071, pp. 561-563.
- S. Deghaye, M. Lamont, L. Mestre, M. Misiowiec, W. Sliwinski, and G. Kruk, “LHC Software Architecture [LSA] -- Evolution Toward LHC Beam Commissioning”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOPA03, pp. 307-309.
- Yu. N. Denisov, “Complex of Systems for Measuring the Characteristics and Stabilization of Static Magnetic Fields”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 482-487.
- J. W. Dodd et al., “SATURNUS: The UCLA Infrared Free-Election Laser Project”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2751-2754.
- Y. Mariette et al., “New Neutron Sensitive Beam Loss Monitor (nBLM)”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 136.
Back to search