JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. An, Y.-S. Cho, B. H. Choi, Y. M. Li, Y. Z. Tang, and L. Zhang, “Prototyping PEFP Low-Beta Copper Cavity and HOM Coupler”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP035, pp. 2070-2072. 
[n]	T. X. Liang et al., “Design of the 500 kA Linear Transformer Driver Stage”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA017, pp. 696-698. 
[n]	S. W. Jang et al., “The High Position Resolution Cavity BPM Developments and Measurement for ILC Final Focus System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3599-3601. doi:10.18429/JACoW-IPAC2014-THPME147
[n]	M. Sjöström, J. Ahlback, M. A. G. Johansson, S. C. Leemann, and R. Nilsson, “Orbit Feedback System for the MAX IV 3 GeV Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPO010, pp. 499-501. 
[n]	M. Li and S. Ohnuma, “Comparison of Analytical and Computational Estimates of Reduction in Linear Aperture in the Presence of Sextupole Field”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 897-900. 
[n]	J. H. Bj?Ârklund Svensson and M. A. G. Johansson, “Relative Alignment Within the MAX IV 3 GeV Storage Ring Magnet Blocks”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 57-59. doi:10.18429/JACoW-IPAC2015-MOAD3
[n]	H. Fares, Y. Kuwamura, and M. Yamada, “Classical and Quantum Mechanical Analyses on Electromagnetic Wave Emissions in the Planar Cherenkov Free Electron Laser”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE026, pp. 2197-2199. 
[n]	C. M. Baffes et al., “Design Considerations for an MEBT Chopper Absorber of 2.1MeV H- at the Project X Injector Experiment at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD035, pp. 2585-2587. 
[n]	C. Johnstone, C. Gattuso, D. Johnson, K. Paul, and M. Syphers, “Analysis and Measurements of Emittance Dilution from Vacuum Windows in the Fermilab Recycler Transfer Lines”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG019, pp. 2931-2933. 
[n]	D. Y. Lee, B. H. Choi, C. O. Choi, H. Jang, H. C. Jung, and K. T. Son, “RF Stability Test of RFQ Cavity with Prototype Low-level Radio Frequency in RAON”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 204-206. doi:10.18429/JACoW-LINAC2018-MOPO094
[n]	S. DeSantis, J. Corlett, A. Wolski, and A. Zholents, “Collective Effects Analysis for the Berkeley Femtosource”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB017, pp. 866-868. 
[n]	D. McCormick, “Fast Ion Chambers for SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1240-1243. 
[n]	S. Mori, D. Satoh, and M. Yoshida, “The RF Gun Adopting the Dielectric Assist Accelerating Structure”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 54-58. doi:10.18429/JACoW-LINAC2018-MOPO008
[n]	M. Tanaka and Y. Y. Lee, “The AGS New Fast Extraction System for the g-2 Experiment and RHIC Injection”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 958-961. 
[n]	M. Fouaidy et al., “Copper Plasma Sprayed Niobium Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C21, pp. 606-614. 
[n]	V. Belov, A. Makarov, V. Nikogosian, H. Symonian, and N. Zapolsky, “The Slow Extraction of Electrons from Synchrotrons and Storage Ring using Synchrotron Radiation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1231-1233. 
[n]	S. P. M?©ller, N. Hertel, and J. S. Nielsen, “ASTRID2 -The New Low-Emmitance Light Source in Denmark”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA008, pp. 2487-2489. 
[n]	A. Bertarelli, G. Arnau-Izquierdo, F. Carra, A. Dallocchio, M. Gil Costa, and N. Mariani, “Research and Development of Novel Advanced Materials for Next-generation Collimators”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THOBB03, pp. 2888-2890. 
[n]	A-M. Valente-Feliciano, H. L. Phillips, S. Popovic, M. Ra?íkovic, J. Upadhyay, and L. Vu?íkovic, “Plasma Etching of a Single-Cell RF Cavity ÔÇô Asymmetric Electronegative Discharge”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO083, pp. 427-430. 
[n]	N. V. Smolyakov, A. Hiraya, T. Muneyoshi, G. V. Rybalchenko, and K. Shirasawa, “Experimental Study of Edge Radiation at HiSOR”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH100, pp. 2698-2700. 
[n]	M. A. G. Johansson, “Design of the MAX IV/Solaris 1.5 GeV Storage Ring Magnets”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO016, pp. 2430-2432. 
[n]	S. Bousson, “Advances in Superconducting RF Cavity Stiffening by Thermal Spraying”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper THA003, pp. 542-549. 
[n]	R. B. Agustsson, Y. C. Chen, T. J. Grandsaert, A. Y. Murokh, F. H. O, and V. Solovyov, “Praseodymium Iron-Boron Undulator With Textured Dysprosium Poles for Compact X-Ray FEL Applications”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP086, pp. 756-758. 
[n]	J. Shi, S. Ohnuma, and G. Wang, “Multi-parameter Sorting of Dipoles for Large Superconducting Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1051-1054. 
[n]	L. R. Prost and A. V. Shemyakin, “Summary of Fermilab's Recycler Electron Cooler Operation and Studies”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUOBA01, pp. 1068-1070. 
[n]	A. Aksoy et al., “The Status of TAC IR FEL & Bremsstrahlung Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE045, pp. 2242-2244. 
[n]	M. A. G. Johansson, Y. Cai, and V. Yakimenko, “SLAC FACET-II Positron Damping Ring Magnet Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1154-1156. doi:10.18429/JACoW-IPAC2016-TUPMB021
[n]	R. M. Bionta, “Characterization of X-Ray FEL Radiation”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THOB003, pp. XX-XX. 
[n]	M. Syphers and L. Michelotti, “Estimates of Dispersive Effects in a Bent NLC Main Linac”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH049, pp. 3786-3788. 
[n]	R. B. Agustsson et al., “Normal Conducting Radio Frequency X-band Deflecting Cavity Fabrication, Validation and Tuning”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI086, pp. 2899-2901. 
[n]	Y.-S. Cho and B. H. Choi, “Design of 20MeV DTL for KOMAC Test Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH105, pp. 3921-3923. 
[n]	G. Andonian et al., “Electron Beam Longitudinal Diagnostic With Sub-Femtosecond Resolution”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 173-175. doi:10.18429/JACoW-IBIC2016-MOPG51
[n]	H. Saugnac et al., “Spoke Cryomodule Prototyping for the MINERVA Project”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 315-319. doi:10.18429/JACoW-SRF2019-MOP098
[n]	M. Fouaidy, S. Bousson, N. Hammoudi, T. Junquera, J. C. Le Scornet, and J. Lesrel, “Kapitza Conductance and Thermal Conductivity of Materials used for SRF Cavities Fabrication”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP028, pp. 263-266. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search