Favourites
For Word
[n] H.-W. Glock et al., “Progress of the BESSY VSR Cold String Development and Testing”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1434-1436. doi:10.18429/JACoW-IPAC2019-TUPGW019
[n] K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3815-3818. doi:10.18429/JACoW-IPAC2017-THPAB047
[n] R. Assmann et al., “Design Status of the CLIC 3-TeV Beam Delivery System and Damping Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A20, pp. 522-526.
[n] G. Olry et al., “Development of a Beta 0.12, 88 MHz, Quarter Wave Resonator and its Cryomodule for the SPIRAL2 Project”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP37, pp. 323-327.
[n] F. Gl?Âckner et al., “The VSR Demo Module Design -- A Spaceframe-Based Module for Cavities with Warm Waveguide HOM Absorbers”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 233. doi:10.18429/JACoW-SRF2021-MOPTEV013
[n] M. Biagini et al., “Upgrade of the PEP-II Low Beta Optics”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP5B08, pp. 430-432.
[n] Y.-H. Lin et al., “Data Acquisition and Monitoring for TPS SRF Module Horizontal Test”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA053, pp. 3264-3266.
[n] C. Limborg et al., “Achieved Performance of an All X-band Photo-injector”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4253-4257. doi:10.18429/JACoW-IPAC2016-FRXBB01
[n] E. d and V. Tikhonchuk, “High Efficiency Laser Ion Acceleration in Low Density Plasmas”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP153, pp. 376-378.
[n] Y. Nosochkov, J. Corbett, and T. Rabedeau, “Study of Low βy Straight Section in SPEAR 3”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH086, pp. 2659-2661.
[n] K. Hirosawa, T. Okada, N. Kuroo, K. Ohmi, N. Ohuchi, and D. Zhou, “The Influence of Higher Order Multipoles of IR Magnets on Luminosity for SuperKEKB”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3463-3465. doi:10.18429/JACoW-IPAC2018-THPAK099
[n] J. D. Fox et al., “A 4.2 GS/s Synchronized Vertical Excitation System for SPS Studies - Steps Toward Wideband Feedback”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR090, pp. 3144-3146.
[n] T. Katoh et al., “Control Computer System for KEK Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1789-1792.
[n] M. C. Thompson et al., “Observation of Multi-GeV Breakdown Thresholds in Dielectric Wakefield Structures”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS015, pp. 3026-3028.
[n] G. Le Bec, J. Chavanne, and P. N, “Shape Optimization for the ESRF II Magnets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1232-1234. doi:10.18429/JACoW-IPAC2014-TUPRO082
[n] A. Novokhatski et al., “A New Q2-Bellows Absorber for the PEP-II SLAC B-Factory”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS076, pp. 4219-4221.
[n] E. I. Simakov, C. H. Boulware, and T. L. Grimm, “Design of a Superconducting Photonic Band Gap Structure Cell”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP042, pp. 178-180.
[n] C. Benabderrahmane et al., “Magnets for the ESRF-EBS Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1096-1099. doi:10.18429/JACoW-IPAC2016-TUPMB001
[n] K. Johnsen, “Experiences in During the Early Running-in Phase of the ISR”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 199-204.
[n] R. Bartolini et al., “Measurements of the Tune Variations induced by Non-linearities in Lepton Machines”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP032L, pp. 917-919.
[n] T. Schultheiss, J. Rathke, V. Ravindranath, J. Rose, and S. K. Sharma, “CESR-type SRF Cavity - Meeting the ASME Pressure Vessel Criteria by Analysis”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP271, pp. 1328-1330.
[n] C. D. Beard et al., “EMMA RF Cavity Design and Prototype Testing at Daresbury”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP002, pp. 3374-3376.
[n] J. Corbett and A. Terebilo, “Interactive Orbit Control Program in MATLAB”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH022, pp. 813-815.
[n] Y. C. Yang et al., “Manufacturing and Vacuum Testing of Aluminum Bending Chambers for TPS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS030, pp. 1596-1598.
[n] E. N. Zaplatin, T. L. Grimm, A. Rogacki, A. Kanareykin, and V. P. Yakovlev, “Euclid Modified SRF Conical Half-wave Resonator Design”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2502-2504. doi:10.18429/JACoW-IPAC2014-WEPRI012
[n] P. Royer, R. Corsini, A. Ferrari, L. Rinolfi, T. Risselada, and F. Tecker, “Beam Dynamics for the Preliminary Phase of the New CLIC Test Facility (CTF3)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH046, pp. 3777-3779.
For LaTeX
Use Complete Form
For BibTeX
References
- H.-W. Glock et al., “Progress of the BESSY VSR Cold String Development and Testing”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1434-1436.
- K. N. Sjobak et al., “New Features of the 2017 SixTrack Release”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3815-3818.
- R. Assmann et al., “Design Status of the CLIC 3-TeV Beam Delivery System and Damping Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A20, pp. 522-526.
- G. Olry et al., “Development of a Beta 0.12, 88 MHz, Quarter Wave Resonator and its Cryomodule for the SPIRAL2 Project”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP37, pp. 323-327.
- F. Gl?Âckner et al., “The VSR Demo Module Design -- A Spaceframe-Based Module for Cavities with Warm Waveguide HOM Absorbers”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 233.
- M. Biagini et al., “Upgrade of the PEP-II Low Beta Optics”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP5B08, pp. 430-432.
- Y.-H. Lin et al., “Data Acquisition and Monitoring for TPS SRF Module Horizontal Test”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPEA053, pp. 3264-3266.
- C. Limborg et al., “Achieved Performance of an All X-band Photo-injector”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4253-4257.
- E. d and V. Tikhonchuk, “High Efficiency Laser Ion Acceleration in Low Density Plasmas”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP153, pp. 376-378.
- Y. Nosochkov, J. Corbett, and T. Rabedeau, “Study of Low βy Straight Section in SPEAR 3”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH086, pp. 2659-2661.
- K. Hirosawa, T. Okada, N. Kuroo, K. Ohmi, N. Ohuchi, and D. Zhou, “The Influence of Higher Order Multipoles of IR Magnets on Luminosity for SuperKEKB”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3463-3465.
- J. D. Fox et al., “A 4.2 GS/s Synchronized Vertical Excitation System for SPS Studies - Steps Toward Wideband Feedback”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR090, pp. 3144-3146.
- T. Katoh et al., “Control Computer System for KEK Proton Synchrotron”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1789-1792.
- M. C. Thompson et al., “Observation of Multi-GeV Breakdown Thresholds in Dielectric Wakefield Structures”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS015, pp. 3026-3028.
- G. Le Bec, J. Chavanne, and P. N, “Shape Optimization for the ESRF II Magnets”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1232-1234.
- A. Novokhatski et al., “A New Q2-Bellows Absorber for the PEP-II SLAC B-Factory”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS076, pp. 4219-4221.
- E. I. Simakov, C. H. Boulware, and T. L. Grimm, “Design of a Superconducting Photonic Band Gap Structure Cell”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP042, pp. 178-180.
- C. Benabderrahmane et al., “Magnets for the ESRF-EBS Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1096-1099.
- K. Johnsen, “Experiences in During the Early Running-in Phase of the ISR”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 199-204.
- R. Bartolini et al., “Measurements of the Tune Variations induced by Non-linearities in Lepton Machines”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP032L, pp. 917-919.
- T. Schultheiss, J. Rathke, V. Ravindranath, J. Rose, and S. K. Sharma, “CESR-type SRF Cavity - Meeting the ASME Pressure Vessel Criteria by Analysis”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP271, pp. 1328-1330.
- C. D. Beard et al., “EMMA RF Cavity Design and Prototype Testing at Daresbury”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP002, pp. 3374-3376.
- J. Corbett and A. Terebilo, “Interactive Orbit Control Program in MATLAB”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH022, pp. 813-815.
- Y. C. Yang et al., “Manufacturing and Vacuum Testing of Aluminum Bending Chambers for TPS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS030, pp. 1596-1598.
- E. N. Zaplatin, T. L. Grimm, A. Rogacki, A. Kanareykin, and V. P. Yakovlev, “Euclid Modified SRF Conical Half-wave Resonator Design”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2502-2504.
- P. Royer, R. Corsini, A. Ferrari, L. Rinolfi, T. Risselada, and F. Tecker, “Beam Dynamics for the Preliminary Phase of the New CLIC Test Facility (CTF3)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH046, pp. 3777-3779.
Back to search