JaCoW Logo

Reference Search

Favourites


For Word

[n]	A. Noda, “Colliding or Merging Beam Section”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP33F, pp. 538-540. 
[n]	P. Girault, “The 3pi/4 Backward TW Structure for the ELETTRA 1.5 GeV Electron Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3005-3008. 
[n]	K. Mizushima, T. Furukawa, K. Noda, and T. Shirai, “Insensitive Method to Power Supply Ripple in Resonant Slow Extraction”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB008, pp. 3894-3896. 
[n]	T. Ohshima, N. Hosoda, H. Maesaka, and S. Matsubara, “Timing Synchronization System for Beam Injection from the SACLA Linac to the SPring-8 Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3882-3885. doi:10.18429/JACoW-IPAC2019-THPRB034
[n]	I. Will, G. Klemz, F. Staufenbiel, and J. Teichert, “Photocathode Laser for the Superconducting Photo Injector at the Forschungszentrum Rossendorf”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH006, pp. 564-566. 
[n]	V. Baranauskas, “Solution to the Einstein and Poincare  Paradox of Superluminal Addition of Velocities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP50C, pp. 835-837. 
[n]	J. A. Johnstone, “BTeV Low-Beta Optics in the Tevatron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH133, pp. 3159-3161. 
[n]	T. Shirai, “Performance of the 100 MeV Injector Linac for the Electron Storage Ring at Kyoto University”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP74, pp. 240-242. 
[n]	J. H. Han and K. Floettmann, “Dark Current Collimation and Modified Gun Geometry for the European X-Ray FEL Project”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH012, pp. 579-582. 
[n]	M. Huening and S. N. Simrock, “System Identification for the Digital RF Control System at the TESLA Test Facility”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP36G, pp. 1732-1734. 
[n]	K. Kubo, K. Oide, J. Urakawa, and T. Okugi, “Test of Optics Diagnostics in ATF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V043, pp. 1484-1486. 
[n]	T. Shirai et al., “A 100 MeV Injector for the Electron Storage Ring at Kyoto University”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA13, pp. 1079-1081. 
[n]	H. Someya et al., “Application of a GTO Thyristor to a Dual Resonant Frequency Circuit for the Magnet of a Rapid-Cycling Synchrotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3775-3778. 
[n]	F. Marhauser et al., “A High Average Power RF-Photoinjector Gun Cavity Developed for the BESSY Soft X-ray FEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH003, pp. 560-563. 
[n]	Y. Otake et al., “Development Activities of Accelerator Instruments for SACLA”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP123, pp. 342-344. 
[n]	H. Koiso and K. Oide, “Lattice Design for KEKB Colliding Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG11, pp. 2780-2782. 
[n]	T. I. Parker and P. C. Peck, “Greening for Bosons”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT5A3, pp. 54-58. 
[n]	R. I. Saban, “LHC Hardware Commissioning Summary”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOZDM01, pp. 56-60. 
[n]	Y. Nosochkov et al., “Design of ILC Extraction Line for 20 mrad Crossing Angle”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP030, pp. 2134-2136. 
[n]	D. Janssen, F. Marhauser, and V. Volkov, “High Peak Current Design of a Superconducting Cavity for a SRF Photoinjector”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH008, pp. 571-574. 
[n]	F. Marcellini, D. Alesini, and A. Ghigo, “Kicker and Monitor for CTF3 Phase Feed Forward”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC007, pp. 1000-1002. 
[n]	M. Krasilnikov, “Impact of the Cathode Roughness on the Emittance of an Electron Beam”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH013, pp. 583-586. 
[n]	T. Sen, “Dynamic Aperture in the Luminosity Upgraded HERA-e Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP34G, pp. 424-426. 
[n]	Y. Otake et al., “Development Status of Beam-Monitor System at XFEL/SPring-8 (Its Temporal Resolution Issue)”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP042, pp. 4045-4047. 
[n]	L. Corner, L. J. Nevay, and R. Walczak, “A High Power Fibre Laser for Electron Beam Emittance Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD058, pp. 3227-3229. 
[n]	K. Tinschert, R. Lang, J. Maeder, F. Maimone, and J. Ro?ƒbach, “Metal Ion Beam Production with Improved Evaporation Ovens”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEPP15, pp. 140-142. 
[n]	N. Ouchi et al., “Superconducting Cavity Development for High Intensity Proton Linac in JAERI”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP020, pp. 450-458. 
[n]	H. Maesaka et al., “Electron Beam Diagnostic System for the Japanese XFEL, SACLA”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOIC02, pp. 38-46. 
[n]	M. Lieuvin, “Commissioning of SPIRAL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEX03A, pp. 68-72. 
[n]	Y. Z. Lin, “Three Types of Linacs for Customs Large Container Inspection Application”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH319, pp. 2808-2810. 
[n]	C. G. Beetham, R. J. Lauckner, and C. Saltmarsh, “Overview of the SPS/LEP Fast Broadcast Message Timing System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 766-769. 
[n]	Y. Funakoshi, “Commissioning of SuperKEKB”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 4-8. doi:10.18429/JACoW-eeFACT2016-MOOTH2
[n]	G. Lanza et al., “The HIE-ISOLDE Superconducting Cavities: Surface Treatment and Niobium Thin Film Coating”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO075, pp. 801-805. 
[n]	D. C. Hagerman, “Operating Results on the 800-MeV Proton Linac at the Los Alamos Scientific Laboratory”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 905-910. 
[n]	J. A. MacLachlan, “Application of Scaling Properties of the Vlasov and Fokker-Planck Equations to Improved Macroparticle Models”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH301, pp. 3180-3181. 
[n]	F. Zimmermann, “Two-Beam Resistive-Wall Wake Field”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMN079, pp. 4237-4239. 
[n]	L. J. Nevay et al., “LHC Collimation and Energy Deposition Studies Using Beam Delivery Simulation (BDSIM)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3101-3103. doi:10.18429/JACoW-IPAC2016-WEPOY047
[n]	M. Nomura et al., “Influence of Core Winding Tension and Ribbon Quality on the MA Core RF Characteristics”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI021, pp. 2747-2749. 
[n]	Yu. V. Korotaev, I. N. Meshkov, S. V. Mironov, A. O. Sidorin, and E. Syresin, “The Modified Betatron Prototype Dedicated to Electron Cooling”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP06J, pp. 1061-1063. 
[n]	S. D. Walker et al., “A Holistic Approach to Simulating Beam Losses in the Large Hadron Collider Using BDSIM”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 221-226. doi:10.18429/JACoW-ICAP2018-TUPAF15
[n]	N. V. Mokhov and I. L. Rakhno, “Protecting LHC Components against Radiation Resulting from Colliding Beam Interactions”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH135, pp. 3165-3167. 
[n]	T. Shirai et al., “Electron Cooling Experiments at S-LSR”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THM1I02, pp. 139-143. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search