Favourites
For Word
[n] A. Noda, “Colliding or Merging Beam Section”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP33F, pp. 538-540.
[n] P. Girault, “The 3pi/4 Backward TW Structure for the ELETTRA 1.5 GeV Electron Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3005-3008.
[n] K. Mizushima, T. Furukawa, K. Noda, and T. Shirai, “Insensitive Method to Power Supply Ripple in Resonant Slow Extraction”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB008, pp. 3894-3896.
[n] T. Ohshima, N. Hosoda, H. Maesaka, and S. Matsubara, “Timing Synchronization System for Beam Injection from the SACLA Linac to the SPring-8 Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3882-3885. doi:10.18429/JACoW-IPAC2019-THPRB034
[n] I. Will, G. Klemz, F. Staufenbiel, and J. Teichert, “Photocathode Laser for the Superconducting Photo Injector at the Forschungszentrum Rossendorf”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH006, pp. 564-566.
[n] V. Baranauskas, “Solution to the Einstein and Poincare Paradox of Superluminal Addition of Velocities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP50C, pp. 835-837.
[n] J. A. Johnstone, “BTeV Low-Beta Optics in the Tevatron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH133, pp. 3159-3161.
[n] T. Shirai, “Performance of the 100 MeV Injector Linac for the Electron Storage Ring at Kyoto University”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP74, pp. 240-242.
[n] J. H. Han and K. Floettmann, “Dark Current Collimation and Modified Gun Geometry for the European X-Ray FEL Project”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH012, pp. 579-582.
[n] M. Huening and S. N. Simrock, “System Identification for the Digital RF Control System at the TESLA Test Facility”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP36G, pp. 1732-1734.
[n] K. Kubo, K. Oide, J. Urakawa, and T. Okugi, “Test of Optics Diagnostics in ATF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V043, pp. 1484-1486.
[n] T. Shirai et al., “A 100 MeV Injector for the Electron Storage Ring at Kyoto University”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA13, pp. 1079-1081.
[n] H. Someya et al., “Application of a GTO Thyristor to a Dual Resonant Frequency Circuit for the Magnet of a Rapid-Cycling Synchrotron”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3775-3778.
[n] F. Marhauser et al., “A High Average Power RF-Photoinjector Gun Cavity Developed for the BESSY Soft X-ray FEL”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH003, pp. 560-563.
[n] Y. Otake et al., “Development Activities of Accelerator Instruments for SACLA”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP123, pp. 342-344.
[n] H. Koiso and K. Oide, “Lattice Design for KEKB Colliding Rings”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAG11, pp. 2780-2782.
[n] T. I. Parker and P. C. Peck, “Greening for Bosons”, in Proc. HF'14, Beijing, China, Oct. 2014, paper THT5A3, pp. 54-58.
[n] R. I. Saban, “LHC Hardware Commissioning Summary”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOZDM01, pp. 56-60.
[n] Y. Nosochkov et al., “Design of ILC Extraction Line for 20 mrad Crossing Angle”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP030, pp. 2134-2136.
[n] D. Janssen, F. Marhauser, and V. Volkov, “High Peak Current Design of a Superconducting Cavity for a SRF Photoinjector”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH008, pp. 571-574.
[n] F. Marcellini, D. Alesini, and A. Ghigo, “Kicker and Monitor for CTF3 Phase Feed Forward”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC007, pp. 1000-1002.
[n] M. Krasilnikov, “Impact of the Cathode Roughness on the Emittance of an Electron Beam”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH013, pp. 583-586.
[n] T. Sen, “Dynamic Aperture in the Luminosity Upgraded HERA-e Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP34G, pp. 424-426.
[n] Y. Otake et al., “Development Status of Beam-Monitor System at XFEL/SPring-8 (Its Temporal Resolution Issue)”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP042, pp. 4045-4047.
[n] L. Corner, L. J. Nevay, and R. Walczak, “A High Power Fibre Laser for Electron Beam Emittance Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD058, pp. 3227-3229.
[n] K. Tinschert, R. Lang, J. Maeder, F. Maimone, and J. Ro?ƒbach, “Metal Ion Beam Production with Improved Evaporation Ovens”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEPP15, pp. 140-142.
[n] N. Ouchi et al., “Superconducting Cavity Development for High Intensity Proton Linac in JAERI”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP020, pp. 450-458.
[n] H. Maesaka et al., “Electron Beam Diagnostic System for the Japanese XFEL, SACLA”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOIC02, pp. 38-46.
[n] M. Lieuvin, “Commissioning of SPIRAL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEX03A, pp. 68-72.
[n] Y. Z. Lin, “Three Types of Linacs for Customs Large Container Inspection Application”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH319, pp. 2808-2810.
[n] C. G. Beetham, R. J. Lauckner, and C. Saltmarsh, “Overview of the SPS/LEP Fast Broadcast Message Timing System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 766-769.
[n] Y. Funakoshi, “Commissioning of SuperKEKB”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 4-8. doi:10.18429/JACoW-eeFACT2016-MOOTH2
[n] G. Lanza et al., “The HIE-ISOLDE Superconducting Cavities: Surface Treatment and Niobium Thin Film Coating”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO075, pp. 801-805.
[n] D. C. Hagerman, “Operating Results on the 800-MeV Proton Linac at the Los Alamos Scientific Laboratory”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 905-910.
[n] J. A. MacLachlan, “Application of Scaling Properties of the Vlasov and Fokker-Planck Equations to Improved Macroparticle Models”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH301, pp. 3180-3181.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Noda, “Colliding or Merging Beam Section”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP33F, pp. 538-540.
- P. Girault, “The 3pi/4 Backward TW Structure for the ELETTRA 1.5 GeV Electron Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3005-3008.
- K. Mizushima, T. Furukawa, K. Noda, and T. Shirai, “Insensitive Method to Power Supply Ripple in Resonant Slow Extraction”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB008, pp. 3894-3896.
- T. Ohshima, N. Hosoda, H. Maesaka, and S. Matsubara, “Timing Synchronization System for Beam Injection from the SACLA Linac to the SPring-8 Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3882-3885.
- I. Will, G. Klemz, F. Staufenbiel, and J. Teichert, “Photocathode Laser for the Superconducting Photo Injector at the Forschungszentrum Rossendorf”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH006, pp. 564-566.
- V. Baranauskas, “Solution to the Einstein and Poincare Paradox of Superluminal Addition of Velocities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP50C, pp. 835-837.
- J. A. Johnstone, “BTeV Low-Beta Optics in the Tevatron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH133, pp. 3159-3161.
- T. Shirai, “Performance of the 100 MeV Injector Linac for the Electron Storage Ring at Kyoto University”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP74, pp. 240-242.
- J. H. Han and K. Floettmann, “Dark Current Collimation and Modified Gun Geometry for the European X-Ray FEL Project”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH012, pp. 579-582.
- M. Huening and S. N. Simrock, “System Identification for the Digital RF Control System at the TESLA Test Facility”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP36G, pp. 1732-1734.
- K. Kubo, K. Oide, J. Urakawa, and T. Okugi, “Test of Optics Diagnostics in ATF”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V043, pp. 1484-1486.
- T. Shirai et al., “A 100 MeV Injector for the Electron Storage Ring at Kyoto University”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPA13, pp. 1079-1081.
- H. Someya et al., “Application of a GTO Thyristor to a Dual Resonant Frequency Circuit for the Magnet of a Rapid-Cycling Synchrotron”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3775-3778.
- F. Marhauser et al., “A High Average Power RF-Photoinjector Gun Cavity Developed for the BESSY Soft X-ray FEL”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH003, pp. 560-563.
- Y. Otake et al., “Development Activities of Accelerator Instruments for SACLA”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP123, pp. 342-344.
- H. Koiso and K. Oide, “Lattice Design for KEKB Colliding Rings”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAG11, pp. 2780-2782.
- T. I. Parker and P. C. Peck, “Greening for Bosons”, in Proc. 55th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders - Higgs Factory (HF'14), Beijing, China, Oct. 2014, paper THT5A3, pp. 54-58.
- R. I. Saban, “LHC Hardware Commissioning Summary”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOZDM01, pp. 56-60.
- Y. Nosochkov et al., “Design of ILC Extraction Line for 20 mrad Crossing Angle”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP030, pp. 2134-2136.
- D. Janssen, F. Marhauser, and V. Volkov, “High Peak Current Design of a Superconducting Cavity for a SRF Photoinjector”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH008, pp. 571-574.
- F. Marcellini, D. Alesini, and A. Ghigo, “Kicker and Monitor for CTF3 Phase Feed Forward”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC007, pp. 1000-1002.
- M. Krasilnikov, “Impact of the Cathode Roughness on the Emittance of an Electron Beam”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH013, pp. 583-586.
- T. Sen, “Dynamic Aperture in the Luminosity Upgraded HERA-e Lattice”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP34G, pp. 424-426.
- Y. Otake et al., “Development Status of Beam-Monitor System at XFEL/SPring-8 (Its Temporal Resolution Issue)”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP042, pp. 4045-4047.
- L. Corner, L. J. Nevay, and R. Walczak, “A High Power Fibre Laser for Electron Beam Emittance Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD058, pp. 3227-3229.
- K. Tinschert, R. Lang, J. Maeder, F. Maimone, and J. Ro?ƒbach, “Metal Ion Beam Production with Improved Evaporation Ovens”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEPP15, pp. 140-142.
- N. Ouchi et al., “Superconducting Cavity Development for High Intensity Proton Linac in JAERI”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP020, pp. 450-458.
- H. Maesaka et al., “Electron Beam Diagnostic System for the Japanese XFEL, SACLA”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOIC02, pp. 38-46.
- M. Lieuvin, “Commissioning of SPIRAL”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEX03A, pp. 68-72.
- Y. Z. Lin, “Three Types of Linacs for Customs Large Container Inspection Application”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH319, pp. 2808-2810.
- C. G. Beetham, R. J. Lauckner, and C. Saltmarsh, “Overview of the SPS/LEP Fast Broadcast Message Timing System”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 766-769.
- Y. Funakoshi, “Commissioning of SuperKEKB”, in Proc. 58th ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'16), Daresbury, UK, Oct. 2016, pp. 4-8.
- G. Lanza et al., “The HIE-ISOLDE Superconducting Cavities: Surface Treatment and Niobium Thin Film Coating”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO075, pp. 801-805.
- D. C. Hagerman, “Operating Results on the 800-MeV Proton Linac at the Los Alamos Scientific Laboratory”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 905-910.
- J. A. MacLachlan, “Application of Scaling Properties of the Vlasov and Fokker-Planck Equations to Improved Macroparticle Models”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH301, pp. 3180-3181.
Back to search