Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Bogacz et al., “CEBAF Energy Recovery Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC006, pp. 195-197.
[n] A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 251-254. doi:10.18429/JACoW-ICALEPCS2015-MOPGF070
[n] W. Wu et al., “Development of a Superconducting Focusing Solenoid for CADS”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPB079, pp. 1011-1013.
[n] H. Winick, “Overview of Synchrotron Radiation Facilities”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 7-12.
[n] J. Safranek, “A Low Emittance Lattice for the NSLS X-Ray Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR02, pp. 266-268.
[n] K. Chen, M. Hosaka, and W. Xu, “Preliminary design for the JHLS storage ring”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC36, unpublished.
[n] W. Corbett et al., “SPEAR 3 Upgrade Project: A Status Report”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH091, pp. 2674-2676.
[n] N. Mityanina, “The Code MBIM1 for the Calculation of the Multibunch Beams Coherent Oscillations Stability (in Approach of Short Bunches)”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP028, pp. 2009-2011.
[n] R. Valdiviez et al., “The Final Mechanical Design, Fabrication, and Commissioning of a Wire Scanner and Scraper Assembly for Halo-Formation Measurements in a Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH045, pp. 1324-1326.
[n] T. Mottershead et al., “Design and Operation of a Proton Microscope for Radiography at 800 MeV”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FOAA004, pp. 702-704.
[n] D. Dunning et al., “The UK XFEL conceptual design and options analysis project”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 754-757. doi:10.18429/JACoW-LINAC2024-THPB059
[n] C. S. Park, “BEAM DYNAMICS STUDY OF HIGH INTENSITY COMPACT CYCLOTRON FOR NEUTRON GENERATOR AT KIRAMS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P09, pp. XX-XX.
[n] M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 348-350. doi:10.18429/JACoW-Cyclotrons2016-THP18
[n] J. H. Lee, J. H. Han, J. H. Hong, C. H. Kim, I. S. Ko, and S. J. Lee, “Laser Heater System Test at PAL-XFEL ITF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3048-3050. doi:10.18429/JACoW-IPAC2016-WEPOY028
For LaTeX
Use Complete Form
For BibTeX
References
- A. Bogacz et al., “CEBAF Energy Recovery Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC006, pp. 195-197.
- A. S. Palaha et al., “Report on Control/DAQ Software Design and Current State of Implementation for the Percival Detector”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 251-254.
- W. Wu et al., “Development of a Superconducting Focusing Solenoid for CADS”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPB079, pp. 1011-1013.
- H. Winick, “Overview of Synchrotron Radiation Facilities”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 7-12.
- J. Safranek, “A Low Emittance Lattice for the NSLS X-Ray Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAR02, pp. 266-268.
- K. Chen, M. Hosaka, and W. Xu, “Preliminary design for the JHLS storage ring”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC36, unpublished.
- W. Corbett et al., “SPEAR 3 Upgrade Project: A Status Report”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH091, pp. 2674-2676.
- N. Mityanina, “The Code MBIM1 for the Calculation of the Multibunch Beams Coherent Oscillations Stability (in Approach of Short Bunches)”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP028, pp. 2009-2011.
- R. Valdiviez et al., “The Final Mechanical Design, Fabrication, and Commissioning of a Wire Scanner and Scraper Assembly for Halo-Formation Measurements in a Proton Beam”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH045, pp. 1324-1326.
- T. Mottershead et al., “Design and Operation of a Proton Microscope for Radiography at 800 MeV”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FOAA004, pp. 702-704.
- D. Dunning et al., “The UK XFEL conceptual design and options analysis project”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 754-757.
- C. S. Park, “BEAM DYNAMICS STUDY OF HIGH INTENSITY COMPACT CYCLOTRON FOR NEUTRON GENERATOR AT KIRAMS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P09, pp. XX-XX.
- M. Schneider, A. Adelmann, N. Pogue, and L. Stingelin, “Suppression of RF Radiation Originating from the Flattop Cavity in the PSI Ring Cyclotron”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 348-350.
- J. H. Lee, J. H. Han, J. H. Hong, C. H. Kim, I. S. Ko, and S. J. Lee, “Laser Heater System Test at PAL-XFEL ITF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3048-3050.
Back to search