Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. B. Gonz?â et al., “NCD-SWEET Beamline Upgrade”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 374-376. doi:10.18429/JACoW-MEDSI2018-THPH17
[n] M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834.
[n] E. Acerbi et al., “Acceleration of H- Ions and Extracted Beam Measurements in the Milan Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper G-003, pp. XX-XX.
[n] J. Kim and H. Blosser, “Optimized Magnet for a 250 MeV Proton Radiotherapy Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-26, pp. XX-XX.
[n] M. Valette et al., “Effect of Quench Heater and CLIQ Firing on the Circulating HL-LHC Beam”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2101-2104. doi:10.18429/JACoW-IPAC2017-TUPVA023
[n] S. J. Werkema, “Record Luminosities at the Tevatron amp; Future Potentiality”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUXMA02, pp. 51-55.
[n] K. Johnson and W. J. Ramler, “Cyclotron Beam Position Sensor”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63F12, pp. XX-XX.
[n] G. Ha et al., “Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1065-1066. doi:10.18429/JACoW-IPAC2016-TUOBB01
[n] P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 210-213. doi:10.18429/JACoW-SRF2019-MOP061
[n] T. Kramer et al., “Delivery of Special Magnets for the MedAustron Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3403-3405. doi:10.18429/JACoW-IPAC2014-THPME072
[n] E. Tanabe, M. Bayer, S. D. Ireton, and G. Kalkanis, “An X-Band Coaxial Standing-Wave Linear Accelerator Structure”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-10, pp. 455-457.
[n] X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4298-4300. doi:10.18429/JACoW-IPAC2019-THPTS077
[n] B. Han et al., “Doubling the SNS H- Beam Current with the Baseline LBNL H- Ion Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2GRC02, pp. 1866-1868.
[n] M. Vossberg, W. A. Barth, L. A. Dahl, N. Mueller, and A. Schempp, “The New GSI HLI-RFQ for CW-Operation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP064, pp. 4920-4922.
[n] D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
[n] P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546.
[n] C. Celata, P. B. Lee, A. M. Sessler, B. A. Shadwick, and J. Wurtele, “A Moment Equation Approach to a Muon Collider Cooling Lattice”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP23C, pp. 1058-1060.
[n] Z. Guo, T. Risselada, and W. Scandale, “Dynamic Behaviour of the CERN Large Hadron Collider (LHC)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 637-640.
[n] M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
[n] Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454.
[n] J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 79-83. doi:10.18429/JACoW-RUPAC2016-WEYMH02
[n] B. G. Chidley, “Beam Transport Design Using a Thin Lens Approximation”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper P07, pp. 338-342.
[n] M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
[n] C. W. Potts, F. R. Brumwell, Y. Cho, A. V. Rauchas, and G. J. Volk, “Status Report on the Rapid Cycling Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2104-2107.
[n] M. Teichmann, B. C. Heisen, K. Weger, and J. Wiggins, “Karabo-GUI: A Multi-Purpose Graphical Front-End for the Karabo Framework”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1063-1065. doi:10.18429/JACoW-ICALEPCS2015-WEPGF153
[n] D. P. Rusthoi and E. A. Wadlinger, “First-, Second-, and Third-Order Achromatic Bend Systems for Free-Electron Laser Applications”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 607-610.
[n] M. Vieille Grosjean et al., “Reconstruction of Longitudinal Electrons Bunch Profiles at FACET, SLAC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3453-3455. doi:10.18429/JACoW-IPAC2014-THPME093
[n] S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Gas Jet Profile Monitor for Use in IOTA Proton Beam”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 347-349. doi:10.18429/JACoW-IBIC2017-WEPCC05
[n] J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 595-598.
[n] W. Roberts and B. Aikens, “A 256 Channel Digital Filter for a Data Acquisition System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1455-1458.
[n] P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
[n] M. Jablonka et al., “Beam Performances of MACSE, the Saclay Superconducting Test Accelerator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 713-716.
[n] J. Rahighi et al., “Progress Status of the Iranian Light Source Facility Laboratory”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 240-242. doi:10.18429/JACoW-IPAC2014-MOPRO069
[n] C.-Y. Tan et al., “Status of the Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4366-4369. doi:10.18429/JACoW-IPAC2017-THPIK115
[n] A. Halavanau et al., “Progress in High Power High Brightness Double Bunch Self-Seeding at LCLS-II”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 726-729. doi:10.18429/JACoW-FEL2019-THP071
[n] G. D'Auria et al., “X-band Technology for FEL Sources”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP023, pp. 101-104.
[n] J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 489-491. doi:10.18429/JACoW-IPAC2014-MOPME050
[n] J. A. Caggiano et al., “Design of the Neutron Imaging Differential Pumping Line at LLNL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1312-1314. doi:10.18429/JACoW-IPAC2019-TUPMP033
[n] W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2296-2299. doi:10.18429/JACoW-IPAC2019-WEZZPLS3
[n] L. Yang et al., “Low Q Cavity BPM Study for the Beam Position Measurement of Nanosecond Spaced Electron Bunches”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1881-1883. doi:10.18429/JACoW-IPAC2018-WEPAF027
[n] A. V. Kulikov and S. D. Ecklund, “SLC Positron Source Pulsed Flux Concentrator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2005-2008.
[n] D. Spence and K. R. Lykke, “Production of Negative Hydrogen and Deuterium Ions in Microwave-Driven Ion Sources”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4048, pp. 508-510.
[n] J.-F. Ostiguy and L. Michelotti, “CHEF: A Framework for Accelerator Optics and Simulation”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper TUAPMP02, pp. 153-156.
[n] F. Brandeberry, G. Gunderson, M. Knott, and A. Rauchas, “A Mini-Computer Based DIgital RF Control System for the ZGS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1756-1759.
[n] J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 618-621. doi:10.18429/JACoW-ICALEPCS2017-TUPHA088
[n] H. N. Jungwirth, “A Formulation of the Mass of Cyclotron Magnets in Terms of Ion Characteristics and Maximum Field”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-13, pp. 325-328.
[n] Y. Yano, A. Goto, K. Hatanaka, S. Motonaga, and H. Takebe, “Beam Injection and Extraction System of RIKEN Ring Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-01, pp. 470-472.
[n] K. D. Jacobs and B. G. McAllister, “Turn-by-Turn Transverse Phase Space Measurements in Real Time”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH133, pp. 2395-2396.
[n] M. M. Gordon, “Limitations on Duty-Factor Improvement (via Phase-Shifting) Using H- Ions”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63E11, pp. XX-XX.
[n] T. M. Taylor, “Superconducting Magnets for a Super LHC”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOYGB002, pp. 129-133.
[n] V. M. Tsakanov, M. Ivanyan, and Y. L. Martirosyan, “Beam Physics Issues in CANDLE Synchrotron Light Source Project”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG101, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- J. B. Gonz?â et al., “NCD-SWEET Beamline Upgrade”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 374-376.
- M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834.
- E. Acerbi et al., “Acceleration of H- Ions and Extracted Beam Measurements in the Milan Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper G-003, pp. XX-XX.
- J. Kim and H. Blosser, “Optimized Magnet for a 250 MeV Proton Radiotherapy Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-26, pp. XX-XX.
- M. Valette et al., “Effect of Quench Heater and CLIQ Firing on the Circulating HL-LHC Beam”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2101-2104.
- S. J. Werkema, “Record Luminosities at the Tevatron amp; Future Potentiality”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUXMA02, pp. 51-55.
- K. Johnson and W. J. Ramler, “Cyclotron Beam Position Sensor”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63F12, pp. XX-XX.
- G. Ha et al., “Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1065-1066.
- P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 210-213.
- T. Kramer et al., “Delivery of Special Magnets for the MedAustron Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3403-3405.
- E. Tanabe, M. Bayer, S. D. Ireton, and G. Kalkanis, “An X-Band Coaxial Standing-Wave Linear Accelerator Structure”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-10, pp. 455-457.
- X. D. Tu et al., “Beam Instability Induced by RF System of an FEL-THZ Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4298-4300.
- B. Han et al., “Doubling the SNS H- Beam Current with the Baseline LBNL H- Ion Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE2GRC02, pp. 1866-1868.
- M. Vossberg, W. A. Barth, L. A. Dahl, N. Mueller, and A. Schempp, “The New GSI HLI-RFQ for CW-Operation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP064, pp. 4920-4922.
- D. J. Nicklaus et al., “An Erlang-Based Front End Framework for Accelerator Controls”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THDAUST02, pp. 1264-1266.
- P. Walstrom and E. G. Cook, “A 50 kV Solid State Multipulse Kicker Modulator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAC004, pp. 544-546.
- C. Celata, P. B. Lee, A. M. Sessler, B. A. Shadwick, and J. Wurtele, “A Moment Equation Approach to a Muon Collider Cooling Lattice”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP23C, pp. 1058-1060.
- Z. Guo, T. Risselada, and W. Scandale, “Dynamic Behaviour of the CERN Large Hadron Collider (LHC)”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 637-640.
- M. A. Brubaker, C. A. Ekdahl, and C. P. Yakymyshyn, “Electro-Optic Beam Position and Pulsed Power Monitors for the Second Axis of DARHT”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper ROAB007, pp. 534-538.
- Y. Chung, D. Barr, G. Decker, K. Evans Jr., and E. Kahana, “Sensitivity and Offset Calibration for the Beam Position Monitors at the Advanced Photon Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPQ03, pp. 2452-2454.
- J. L. Conradie et al., “A Radioactive Ion Beam and Isotope Production Facility for iThemba LABS”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 79-83.
- B. G. Chidley, “Beam Transport Design Using a Thin Lens Approximation”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper P07, pp. 338-342.
- M. Xiao, “Recycler Chromaticities and End Shims for NOvA at Fermilab”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPR085, pp. 2023-2025.
- C. W. Potts, F. R. Brumwell, Y. Cho, A. V. Rauchas, and G. J. Volk, “Status Report on the Rapid Cycling Synchrotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2104-2107.
- M. Teichmann, B. C. Heisen, K. Weger, and J. Wiggins, “Karabo-GUI: A Multi-Purpose Graphical Front-End for the Karabo Framework”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1063-1065.
- D. P. Rusthoi and E. A. Wadlinger, “First-, Second-, and Third-Order Achromatic Bend Systems for Free-Electron Laser Applications”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 607-610.
- M. Vieille Grosjean et al., “Reconstruction of Longitudinal Electrons Bunch Profiles at FACET, SLAC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3453-3455.
- S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Gas Jet Profile Monitor for Use in IOTA Proton Beam”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 347-349.
- J. Haimson, C. P. Sargent, and J. N. Weaver, “Highly Phase-Stable RF Power Circuits for the MIT-LNS Linac”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 595-598.
- W. Roberts and B. Aikens, “A 256 Channel Digital Filter for a Data Acquisition System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1455-1458.
- P. Asboe-Hansen et al., “Acceleration and Stacking of Deuterons in the CERN PS and ISR”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1557-1561.
- M. Jablonka et al., “Beam Performances of MACSE, the Saclay Superconducting Test Accelerator”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 713-716.
- J. Rahighi et al., “Progress Status of the Iranian Light Source Facility Laboratory”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 240-242.
- C.-Y. Tan et al., “Status of the Perpendicular Biased 2nd Harmonic Cavity for the Fermilab Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4366-4369.
- A. Halavanau et al., “Progress in High Power High Brightness Double Bunch Self-Seeding at LCLS-II”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 726-729.
- G. D'Auria et al., “X-band Technology for FEL Sources”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP023, pp. 101-104.
- J. C. Garnier et al., “Reliable Software Development for Machine Protection Systems”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 489-491.
- J. A. Caggiano et al., “Design of the Neutron Imaging Differential Pumping Line at LLNL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1312-1314.
- W. H. Tan, P. Piot, and A. Zholents, “Longitudinal-Phase-Space Manipulation for Efficient Beam-Driven Structure Wakefield Acceleration”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2296-2299.
- L. Yang et al., “Low Q Cavity BPM Study for the Beam Position Measurement of Nanosecond Spaced Electron Bunches”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1881-1883.
- A. V. Kulikov and S. D. Ecklund, “SLC Positron Source Pulsed Flux Concentrator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2005-2008.
- D. Spence and K. R. Lykke, “Production of Negative Hydrogen and Deuterium Ions in Microwave-Driven Ion Sources”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4048, pp. 508-510.
- J.-F. Ostiguy and L. Michelotti, “CHEF: A Framework for Accelerator Optics and Simulation”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper TUAPMP02, pp. 153-156.
- F. Brandeberry, G. Gunderson, M. Knott, and A. Rauchas, “A Mini-Computer Based DIgital RF Control System for the ZGS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1756-1759.
- J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 618-621.
- H. N. Jungwirth, “A Formulation of the Mass of Cyclotron Magnets in Terms of Ion Characteristics and Maximum Field”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I1-13, pp. 325-328.
- Y. Yano, A. Goto, K. Hatanaka, S. Motonaga, and H. Takebe, “Beam Injection and Extraction System of RIKEN Ring Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-01, pp. 470-472.
- K. D. Jacobs and B. G. McAllister, “Turn-by-Turn Transverse Phase Space Measurements in Real Time”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH133, pp. 2395-2396.
- M. M. Gordon, “Limitations on Duty-Factor Improvement (via Phase-Shifting) Using H- Ions”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63E11, pp. XX-XX.
- T. M. Taylor, “Superconducting Magnets for a Super LHC”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOYGB002, pp. 129-133.
- V. M. Tsakanov, M. Ivanyan, and Y. L. Martirosyan, “Beam Physics Issues in CANDLE Synchrotron Light Source Project”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG101, pp. XX-XX.
Back to search