JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y.-T. Li et al., “The record of RF transmitter power supply module maintenance in NSRRC”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3613-3614. doi:10.18429/JACoW-IPAC2023-WEPM021
[n]	M. Patil, J. Song, M. Reaume, M. Larmann, N. Bultman, and R. Quispe-Abad, “Thermal analysis of rotating single slice graphite target system for FRIB”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3827-3829. doi:10.18429/JACoW-IPAC2024-THPS41
[n]	S. G. Biedron et al., “The Operation of the BNL/ATF GUN-IV Photocathode RF Gun at the Advanced Photon Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA59, pp. 2024-2026. 
[n]	P. Krejcik, R. Assmann, F.-J. Decker, S. Hartman, R. Miller, and T. Raubenheimer, “Direct Measurement of Transverse Wakefields in the SLC Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPB02, pp. 659-661. 
[n]	J. J. Song et al., “LIGA-Fabrication of mm-Wave Accelerating Cavity Structures at the Advanced Photon Source (APS)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5B010, pp. 461-463. 
[n]	S. Khan, “Future Plans for DELTA”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP023, pp. 1144-1146. 
[n]	G. Portmann and D. Robin, “Beam Based Alignment Of C-Shaped Quadrupole Magnets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP45C, pp. 620-622. 
[n]	I. Kriznar et al., “The Upgrade of the ANKA Control System to ACS (Advanced Control System)”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP541, pp. XX-XX. 
[n]	H. Abe et al., “Initial Results of RF Gun Experiment”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA56, pp. 2015-2017. 
[n]	Y. Ishi, Y. Kuriyama, Y. Mori, M. Sakamoto, and T. Uesugi, “KURRI FFAG's Future Project as ADSR Proton Driver”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 366-370. doi:10.18429/JACoW-Cyclotrons2016-THC01
[n]	C. J. Bocchetta et al., “One and a Half Years of Experience with the Operation of the Synchrotron Light Source ELETTRA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAR21, pp. 309-311. 
[n]	M. Kadunc et al., “Deployment of Abeans Release 3 for the TINE Control System at DESY”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP506, pp. XX-XX. 
[n]	K. Kostro, J. Andersson, F. Di Maio, S. Jensen, and N. Trofimov, “The Controls Middleware (CMW) at CERN - Status and Usage”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WE201, pp. XX-XX. 
[n]	A. Brynes, “Characterisation of microbunching instability at the FERMI Free Electron Laser”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 47-52. doi:10.18429/JACoW-IPAC2023-MOOG2
[n]	C. Benvenuti, “Invited Paper: Cryopumping for Cyclotrons”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper D-02, pp. 2128-2132. 
[n]	R. A. Legg, M. V. Fisher, K. J. Kleman, T. L. Grimm, R. Jecks, and B. Kuhlman, “Development of a Frequency Map for the WiFEL SRF Gun”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO032, pp. 151-153. 
[n]	J. Zhou, J. C. McNeur, J. B. Rosenzweig, G. Travish, and R. B. Yoder, “Fabrication of a Laser-based Microstructure for Particle Acceleration”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD045, pp. 4381-4383. 
[n]	C. Johnstone, D. Bogert, J. Lackey, and R. Tomlin, “Stripping Foil Losses and Space Charge Blowup in the FNAL Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 860-863. 
[n]	Ph. Guimbal et al., “Status of the ELSA-2 Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI066, pp. 1768-1770. 
[n]	T. Ilg et al., “Mechanical Design of the Drift-Tube Linac (DTL) for the Spallation Neutron Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB051, pp. 2841-2843. 
[n]	G. Westenskow et al., “A Chopper Driven 11.4-GHz Traveling-Wave RF Generator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 646-649. 
[n]	D. J. Liska, N. Bultman, and L. O. Carlisle, “Thermal Design of Drift Tubes for High-Gradient Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-4, pp. 46-47. 
[n]	D. Shu, P. K. Job, T. M. Kuzay, and S. Korenev, “CVD-Diamond-Based Position-Sensitive Detector Test with Electron Beam from a RhodotronTM Accelerator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH316, pp. 2435-2437. 
[n]	D. Capatina et al., “APS 2-ID Beamline, Upgrade to Canted Configuration”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 342-344. doi:10.18429/JACoW-MEDSI2016-WEPE18

For LaTeX

Use Complete Form

For BibTeX

References

Back to search