JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Harrison et al., “First Steps Towards a Single-Shot Longitudinal Profile Monitor: Study of the Properties of Coherent Smith-Purcell Radiation Using the Surface Current Model”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 340-343. doi:10.18429/JACoW-IPAC2016-MOPMR040
[n]	F. Ludwig et al., “Drift Calibration Techniques for Future FELs”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA041, pp. 1419-1421. 
[n]	B. C. Kuske and M. McAteer, “Adjusting BERLinPro Optics to Commissioning Needs”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 165-170. doi:10.18429/JACoW-ERL2019-FRCOXBS05
[n]	A. Santamar?¡a Garc?¡a et al., “Systematic Studies of Transverse Emittance Measurements Along the CERN PS Booster Cycle”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 806-809. doi:10.18429/JACoW-IPAC2018-TUPAF047
[n]	G. Sterbini, B. Dehning, S. S. Gilardoni, and A. Guerrero, “Beam-based Measurements of the CPS Wire Scanner Precision and Accuracy”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3674-3676. doi:10.18429/JACoW-IPAC2014-THPME173
[n]	A. N. Pham et al., “Design of a Compact All-Permanent Magnet ECR Ion Source Injector for ReA at MSU NSCL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4054-4056. doi:10.18429/JACoW-IPAC2015-THPF141
[n]	S. Hojo et al., “Present Status of Cyclotrons (NIRS-930, HM-18) at NIRS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT008, pp. 46-48. 
[n]	F. Gougnaud et al., “Slow Control for Micromegas and Drift Chambers”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP013, pp. XX-XX. 
[n]	H. Karadeniz and S. Sultansoy, “QCD Explorer Proposal: E-linac versus E-ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS056, pp. 673-675. 
[n]	P. J. Chou, C. H. Kuo, C.-C. Kuo, and M.-H. Wang, “Collective Effects in the Storage Ring of Taiwan Photon Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH062, pp. 2928-2930. 
[n]	A. D. Palczewski, R. L. Geng, and C. E. Reece, “Analysis of New High-Q0 SRF Cavity Tests by Nitrogen Gas Doping at Jefferson Lab”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP138, pp. 736-739. 
[n]	O. Etisken, F. Antoniou, A. De Santis, C. Milardi, and F. Zimmermann, “Collective Effects Estimates for the Damping Ring Design of the FCC-ee”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2435-2438. doi:10.18429/JACoW-IPAC2022-THPOST003
[n]	M. J. Yang, “Lattice Function Measurement with TBT BPM Data”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ20, pp. 2500-2502. 
[n]	T. Momose, H. Ishimaru, K. Kanazawa, H. Mizuno, K. Narushima, and H. Watanabe, “Operational Characteristics of the TRISTAN Accumulation Ring Vacuum System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3809-3812. 
[n]	M. Krishnan et al., “Energetic Condensation Growth of Nb Thin-films”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUIOB01, pp. 309-318. 
[n]	C. Y. Yoshikawa et al., “Design and Simulation of a Matching System into the Helical Cooling Channel”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1382-1385. doi:10.18429/JACoW-IPAC2014-TUPME017
[n]	K. Hanke et al., “Status of the LIU Project at CERN”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3397-3399. doi:10.18429/JACoW-IPAC2014-THPME070
[n]	P. Gerhard, W. Barth, L. A. Dahl, A. Schempp, and K. Tinschert, “Status of the Unilac-upgrade Programme for the Heavy Element Research at GSI-Ship”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP021, pp. 3416-3418. 
[n]	G. Horikoshi, T. Kubo, H. Mizuno, K. Satoh, and H. Watanabe, “Vacuum System for the KEK Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1290-1293. 
[n]	F. Furuta et al., “Experimental Comparison at KEK of High Gradient Performance of Different Single Cell Superconducting Cavity Designs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS084, pp. 750-752. 
[n]	Z. H. Bai et al., “Initial Lattice Design for Hefei Advanced Light Source: A VUV and Soft X-ray Diffraction-limited Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2889-2891. doi:10.18429/JACoW-IPAC2016-WEPOW027
[n]	R. Bracco, B. Diviacco, D. Millo, R. P. Walker, M. Zalateu, and D. Zangrando, “Development of Elliptical Undulators for ELETTRA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B10, pp. 2322-2324. 
[n]	R. Xiang et al., “A Step Closer to the CW High Brilliant Beam with the ELBE SRF-Gun-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1456-1458. doi:10.18429/JACoW-IPAC2015-TUPWA023
[n]	Y. Lee, V. Gandel, D. C. Kiselev, D. Reggiani, M. Seidel, and S. Teichmann, “Simulation based optimization of a collimator system at the PSI proton accelerator facilities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC088, pp. 4260-4262. 
[n]	S. B. van der Geer and M. J. de Loos, “Multi-objective Genetic Optimization with the General Particle Tracer (GPT) Code”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 492-494. doi:10.18429/JACoW-IPAC2015-MOPJE076
[n]	C. D. Nantista, V. A. Dolgashev, and S. G. Tantawi, “Novel Accelerator Structure Couplers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB036, pp. 1276-1278. 
[n]	K. Oide, “Overview of High Energy e+e- Factories”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 1-3. doi:10.18429/JACoW-eeFACT2016-MOOTH1
[n]	L. Serafini et al., “Electron Linac Optimization for Driving Bright Gamma-ray Sources based on Compton Back-scattering”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO008, pp. 1461-1463. 
[n]	A. V. Zlobin, Y. I. Alexahin, V. V. Kapin, V. V. Kashikhin, N. V. Mokhov, and I. S. Tropin, “Preliminary Design of a Higgs Factory +- Storage Ring”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI061, pp. 1487-1489. 
[n]	S. S. Gilardoni and M. Giovannozzi, “First Observations of Intensity-dependent Effects for Transversally Split Beams”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS016, pp. 631-633. 
[n]	V. Kain et al., “Origin of the Damage to the Internal High Energy Beam Dump in the CERN SPS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3927-3929. doi:10.18429/JACoW-IPAC2015-THPF096
[n]	H. T. Edwards et al., “Comparison of Buffered Chemical Polished and Electropolished 3.9 GHz Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO063, pp. 379-383. 
[n]	H. Ishimaru, Z. Igarashi, K. Muto, and S. Shibata, “Beam Profile Measurements for KEK 12 GeV Proton Synchrotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1821-1824. 
[n]	Ya. V. Shashkov, I. V. Konoplev, and N. Yu. Samarokov, “Electromagnetic Design of a Superconducting dual axis Spoke Cavity”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 94-97. doi:10.18429/JACoW-ERL2019-WEPNEC14
[n]	C. P. Stoll and F. Hug, “Beam Breakup Limit Estimations and Higher Order Mode Characterisation for MESA”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 134-137. doi:10.18429/JACoW-ERL2019-THCOWBS06
[n]	B. L. Bures et al., “X-ray Pole Figure Analysis on Fiber Textured Epitaxial Niobium Films for SRF Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO080, pp. 418-421. 
[n]	G. Ha et al., “Demonstration of Current Profile Shaping using Double Dog-Leg Emittance Exchange Beam Line at Argonne Wakefield Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1065-1066. doi:10.18429/JACoW-IPAC2016-TUOBB01
[n]	N. Banerjee et al., “Essential Instrumentation for the Characterization of ERL Beams”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 150-154. doi:10.18429/JACoW-ERL2019-FRCOWBS04
[n]	C. Hessler, E. Chevallay, M. Divall Csatari, S. Doebert, and V. Fedosseev, “Lifetime Studies of Cs2Te Cathodes at the PHIN RF Photoinjector at CERN”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD066, pp. 1554-1556. 
[n]	T. Suwada, K. Furukawa, and F. Miyahara, “Development of FPBA-Based TDC With Wide Dynamic Range for Monitoring the Trigger Timing Distribution System at the KEKB Injector Linac”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 70-74. doi:10.18429/JACoW-IBIC2015-MOPB017
[n]	M. J. Yang, “A Beamline Analysis Program for Main Injector Commissioning”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP30, pp. 723-725. 
[n]	A. Huschauer et al., “Approaching the High-Intensity Frontier Using the Multi-Turn Extraction at the CERN Proton Synchrotron”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 231-236. doi:10.18429/JACoW-HB2018-WEA1WA02
[n]	T. Nishikawa and G. Horikoshi, “Status of KEK TRISTAN Project”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 1983-1988. 
[n]	R. Ichimiya, K. Furukawa, F. Miyahara, M. Satoh, and T. Suwada, “Development of High Precision Beam Position Monitor Readout System with Narrow Bandpass Filters for the KEKB Injector Linac Towards the SuperKEKB”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC14, pp. 698-701. 
[n]	K. Hanke et al., “High-Brightness Challenges for the Operation of the CERN Injector Complex”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 352-356. doi:10.18429/JACoW-HB2018-THA1WD04
[n]	L. Groening et al., “Comparison of Different Simulation Codes with UNILAC Measurements for High Beam Currents”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TU1IOPK02, pp. 48-52. 
[n]	K. Zengin, A. K. ?çift?ºi, and R. ?çift?ºi, “A Study of Lattice Structure and Insertion Devices at the Positron Ring of the TAC Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP001, pp. 1081-1083. 
[n]	A. O. Sidorin et al., “Design of the Nuclotron Booster in the NICA Project”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD007, pp. 681-683. 
[n]	T. Suwada, “Signal Transmission Characteristics in Stripline-Type Beam Position Monitor”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA25, pp. 394-398. 
[n]	B. Ketenoglu et al., “Technical Design Studies of TAC SASE FEL Proposal”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC39, pp. 325-328. 
[n]	G. S. Staats et al., “Kicker Development at the ELBE Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 520-522. doi:10.18429/JACoW-IPAC2014-MOPME067
[n]	Z. H. Yang, Z. H. Bai, W. Li, G. Liu, and L. Wang, “Study of GF Symplectic Tracking Method and Compensation for the EPU104 at the HLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3603-3605. doi:10.18429/JACoW-IPAC2018-THPAK152
[n]	M. Abo-Bakr and M. Arnold, “Working Group Summary: ERL Facilities”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 171-176. doi:10.18429/JACoW-ERL2019-FRCOYBS01
[n]	S. Fukumoto et al., “Operation of KEK Preinjector”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D03, pp. 193-196. 
[n]	B. R. Blomberg et al., “Planned High-brightness Channeling Radiation Experiment at Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1457-1459. doi:10.18429/JACoW-IPAC2014-TUPME044
[n]	M. G. Hoffmann et al., “Performance of the New Coupled Bunch Feedback System at HERA-p”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN018, pp. 185-187. 
[n]	M. G. Hoffmann, M. Hoffmann, F. Ludwig, P. Morozov, and Ch. Schmidt, “Recent LLRF Measurements of the 3rd Harmonic System for FLASH”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA042, pp. 1422-1424. 
[n]	N. V. Mokhov, Y. I. Alexahin, V. V. Kashikhin, S. I. Striganov, I. S. Tropin, and A. V. Zlobin, “Mitigating Radiation Impact on Superconducting Magnets of the Higgs Factory Muon Collider”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1084-1086. doi:10.18429/JACoW-IPAC2014-TUPRO030
[n]	C. E. Reece, S. Castagnola, P. Denny, and A. L. A. Mitchell, “New Improved Horizontal Electropolishing System for SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 237. doi:10.18429/JACoW-SRF2021-MOPTEV014
[n]	T. J. Shen et al., “SSRF Magnet Power Supply System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP130, pp. 3667-3669. 
[n]	F. Marhauser et al., “Status and Test Results of High Current 5-cell SRF Cavities Developed at JLAB”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP140, pp. 886-888. 
[n]	J.-C. Denard, C. Herbeaux, M. Labat, V. Leroux, A. Loulergue, and J. L. Marlats, “BPM System Interlock for Machine Protection at SOLEIL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC169, pp. 2379-2381. 
[n]	M. Borland, L. Emery, W. Guo, V. Sajaev, and A. Xiao, “Application of Direct Methods of Optimizing Storage Ring Dynamic and Momentum Apertures”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper FR1IOPK09, pp. 255-258. 
[n]	Y. Chen et al., “Space-Charge Dominated Photoemission in High Gradient Photocathode RF Guns”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 941-944. doi:10.18429/JACoW-LINAC2018-THPO116
[n]	S. C. Alverson, D. E. Anderson, and S. Gilevich, “LCLS-II Injector Laser System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1397-1399. doi:10.18429/JACoW-ICALEPCS2017-THPHA025
[n]	N/A, “N/A”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper FR1IOPK02, pp. XX-XX. 
[n]	V. A. Dolgashev, “High Magnetic Fields in Couplers of X-Band Accelerating Structures”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB032, pp. 1267-1269. 
[n]	Y. Alexahin and E. Gianfelice-Wendt, “A 3 TeV Muon Collider Lattice Design”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC041, pp. 1254-1256. 
[n]	K. André, J. Keintzel, S. Liuzzo, P. Raimondi, R. Tomas, and S. White, “Tuning Strategies for the FCC-ee Local Chromaticity Correction Collider Lattice”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1079, unpublished. 
[n]	R. J. England et al., “Applications for Optical-Scale Dielectric Laser Accelerators”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC28, pp. 129-131. 
[n]	B. Diviacco, R. Bracco, D. Millo, R. P. Walker, M. Zalateu, and D. Zangrando, “New Insertion Devices for ELETTRA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH011, pp. 2468-2470. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search