Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Lorkiewicz, “A Miniature H- Ion Source for the C-30 Compact Cyclotron at Swierk”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP086L, pp. 1528-1529.
[n] R. Kieffer et al., “The Beam Gas Vertex Profile Monitoring Station for HL-LHC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2672-2675. doi:10.18429/JACoW-IPAC2019-WEPGW082
[n] M. Schmoekel et al., “String Assembly for the EU-XFEL 3.9 GHz Module at DESY”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB105, pp. 869-873.
[n] A. Drago et al., “Multi-Bunch Longitudinal Dynamics and Diagnostics via a Digital Feedback System at PEP-II, DAFNE, ALS and SPEAR”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEOB01A, pp. 296-298.
[n] J. Gronberg, A. Abbott, C. G. Brown, J. A. Clarke, J. B. Javedani, and W. T. Piggott, “Design of a Pulsed Flux Concentrator for the ILC Positron Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC037, pp. 4137-4139.
[n] M. Wake et al., “Switching Power Supply for Induction Accelerators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN042, pp. 251-253.
[n] A. C. Caruso, F. Consoli, A. Longhitano, A. Spart?á, and L. Xia, “New PC-Based Control for the RF System at INFN/LNS”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP040, pp. 744-746.
[n] M. Chatterjee, D. Koley, and P. Y. Nabhiraj, “Development of an Ethernet Enabled Microcontroller Based Module for Superconducting Cyclotron ECR Beamline Control”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD39, pp. 73-75.
[n] D. Kelliher et al., “Adiabatic capture in high-intensity, high-power rings”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS005, unpublished.
[n] Z.-K. Liu et al., “Operation of TPS 300 kW solid-state amplifier”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1492-1494. doi:10.18429/JACoW-IPAC2024-TUPR32
[n] S. Wijethunga et al., “Electron cloud measurements in Fermilab booster”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2858-2861. doi:10.18429/JACoW-IPAC2023-WEPA093
[n] M. Bertucci et al., “Quench and Field Emission Diagnostics for the ESS Medium-Beta Prototypes Vertical Tests at LASA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1007-1010. doi:10.18429/JACoW-IPAC2017-MOPVA061
[n] W. Butcher, C. Welsch, H. Zhang, M. Patel, N. Kumar, and O. Stringer, “Experimental study into the invasiveness of a gas jet beam profile monitor for charged particle beams”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2229-2231. doi:10.18429/JACoW-IPAC2024-WEPG19
[n] A. Denker et al., “Status of the HZB Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT002, pp. 31-33.
[n] E. Kashy, P. S. Miller, and J. A. Nolen, “Beam Emittance Measurements with a Dispersion-Matched Magnetic Spectrograph”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-07, pp. 2334-2336.
[n] G. Bischof, A. M, B. A, and A. Walter, “A General Solution for Complex Vacuum System Controls”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 30-34. doi:10.18429/JACoW-PCaPAC2018-WEP03
[n] L. Bartelson et al., “A Second Long Pulse Modulator for TESLA Using IGBTs”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP048G, pp. 2585-2587.
[n] Y. Chung et al., “Local Beam Position Feedback Experiments on the ESRF Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ15, pp. 2699-2701.
[n] H. C. Chao, I. V. Agapov, and S. A. Antipov, “Design Considerations of a High Intensity Booster for PETRA IV”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1386-1389. doi:10.18429/JACoW-IPAC2021-TUPAB023
[n] A. Buechner et al., “Pulsed RF System for the ELBE Superconducting Accelerator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH151, pp. 411-412.
[n] M. Tomizawa et al., “Beam instability suppression during debunching process through slippage factor tuning in the J-PARC Main Ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM028, unpublished.
[n] C. W. O. Ostenfeld and M. Pedersen, “Wigglers at Danfysik”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA001, pp. 2123-2125.
[n] P. Denham et al., “Developments and characterization of a gas jet ionization imaging optical column”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4810-4813. doi:10.18429/JACoW-IPAC2023-THPL147
[n] J. F. Schmidt, O. Boldt, F. Frommberger, W. Hillert, and J.-P. Thiry, “Optimizing Polarization with an Improved Integer Resonance Correction Scheme at ELSA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1108-1110. doi:10.18429/JACoW-IPAC2014-TUPRO039
[n] P. Muggli et al., “Status of the Plasma Wakefield Acceleration Experiment at the Stanford Linear Accelerator Center”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPC008, pp. 122-125.
[n] E. S. Masunov and N. E. Vinogradov, “Methods of Ion Focusing and Acceleration in RF Field Containing Nonsynchronous Harmonics”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP05K, pp. 740-742.
[n] M. A. Nozdrin, N. Balalykin, V. F. Minashkin, G. Shirkov, and S. Weisse, “Diagnostics at JINR LHEP Photogun Bench”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 117-119. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO16
[n] E. Ciapala et al., “Longitudinal Feedback in LEP”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2358-2361.
[n] M. M. Karliner et al., “HIGH-CURRENT STANDING WAVE LINAC WITH GYROCON POWER SOURCE”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THCP02, pp. XX-XX.
[n] A. Nadji, M. Belgroune, P. Brunelle, and L. Nadolski, “Refined Tracking Procedure for the SOLEIL Energy Acceptance Calculations”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB034, pp. 896-898.
[n] Y. Hashimoto et al., “Multi-Ribbon Profile Monitor Using Carbon Graphite Foil for J-PARC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2A01, pp. 429-433.
[n] A. C. Crawford, S. Nagaitsev, A. Sharapa, and A. Shemyakin, “Successful MeV-Range Electron Beam Recirculation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP08C, pp. 1049-1051.
[n] L. P. Robertson, E. G. Auld, G. H. Mackenzie, and A. J. Otter, “Extraction of Multiple Beams of Various Energies from the TRIUMF Negative Ion Isochronous Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C10, pp. XX-XX.
[n] O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
[n] P.-C. Chiu, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and C. Wu, “TLS orbit feedback upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4798-4801. doi:10.18429/JACoW-IPAC2023-THPL141
[n] A. E. Wheelhouse et al., “Daresbury International Cryomodule Coupler Progress”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC048, pp. 2998-3000.
[n] H. R. Kremers, J. P. M. Beijers, S. Brandenburg, V. Mironov, and S. Saminathan, “Detailed Investigation of the 4D Phase-Space of an Ion Beam”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper TUZO02, pp. 30-33.
[n] R. A. Erickson, E. Guerra, M. Stanek, Z. Van Hoover, and J. Warren, “A New Control Room for SLAC Accelerators”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR029, pp. 4029-4031.
[n] M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3283-3285. doi:10.18429/JACoW-IPAC2019-WEPTS069
[n] P. Korysko et al., “VHEE FLASH radiotherapy: cutting-edge research at CLEAR, the CERN Linear Electron Accelerator for Research”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM002, unpublished.
[n] G. Asova et al., “Recent Measurements of the Longitudinal Phase Space at PITZ”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH009, pp. 342-345.
[n] J. R. Chen, C. K. Kuan, K. Y. Kuo, and D. J. Wang, “The Mechanical Stability of the Electron Beam Position Monitor at the Taiwan Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B16, pp. 2429-2431.
[n] V. G. Vaccaro et al., “Optimization Design of a Side Coupled Linac (SCL) for Protontherapy: a New Feeding Solution”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS048, pp. 1603-1605.
[n] S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2865-2868.
[n] P. K. Skowronski, E. Forest, F. Schmidt, and R. de Maria, “New Developments of MAD-X UsingPTC”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP12, pp. 209-212.
[n] L. R. Carver et al., “Usage of the Transverse Damper Observation Box for High Sampling Rate Transverse Position Data in the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 389-392. doi:10.18429/JACoW-IPAC2017-MOPAB113
[n] V. Leurent et al., “Ultra-short x-ray Radiation coming from a Laser Wakefield Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP134, pp. 2809-2811.
[n] M. A. Hofstee, S. Brandenburg, H. Post, R. A. Schellekens, and J. E. de Jong, “Improving the Energy Efficiency, Reliability and Performance of AGOR”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO2PB04, pp. 25-27.
[n] M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2515-2518.
[n] M. Arnold, T. Kuerzeder, J. Pforr, N. Pietralla, M. Steinhorst, and F. Hug, “Construction of a Third Recirculation for the S-DALINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 168-170. doi:10.18429/JACoW-LINAC2016-MOPLR014
[n] M. Attal et al., “Commissioning of SESAME Booster”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2880-2882. doi:10.18429/JACoW-IPAC2016-WEPOW024
[n] H. L. Andrews et al., “An Investigation of Electron Beam Divergence from a Single DFEA Emitter Tip”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4662-4664. doi:10.18429/JACoW-IPAC2018-THPML007
[n] T. Ladzinski, F. Havart, P. Ninin, E. Sanchez-Corral Mena, F. Valentini, and D. Vaxelaire, “New Concepts for Access Devices in the SPS Personnel Protection System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1608-1612. doi:10.18429/JACoW-ICALEPCS2017-THPHA099
[n] E. A. Medvedko, R. G. Johnson, S. R. Smith, and G. R. White, “New Beam Monitoring Instrumentation at ATF2, KEK”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM027, pp. 173-176.
[n] Q. L. Peng et al., “Development of a Quadrupole Magnet for CSNS DTL”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP062, pp. 551-553.
[n] N. Steinhau-Kuehl, R. Bandelmann, D. Kostin, A. Matheisen, M. Schmoekel, and J. K. Sekutowicz, “Vertical Electro-Polishing at DESY of a 1.3 GHz Gun Cavity for CW Application”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB103, pp. 399-403.
[n] R. Apiwatwaja, P. Songsiriritthigul, W. Pairsuwan, T. Ishii, and G. Isoyama, “The Recent Progress of Siam Photon Laboratory”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper WEM104, pp. XX-XX.
[n] L. P. Roobol, S. Brandenburg, and H. Post, “Vertical Perturbation of High Energy Proton Beams in the AGOR Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P4-10, pp. XX-XX.
[n] S. Prabhakar, J. D. Fox, and D. Teytelman, “New Diagnostics and Cures for Coupled-Bunch Instabilities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAA002, pp. 300-304.
[n] S. Brandenburg and L. de Vries, “A Subharmonic Buncher for the AGOR-Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-11, pp. 193-195.
[n] D. Shuman, E. Henestroza, G. Ritchie, D. L. Vanecek, W. Waldron, and S. Yu, “A Pulsed Solenoid for Intense Ion Beam Transport”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT069, pp. 3798-3800.
[n] T. Saeki et al., “The first processing of capacitive-coupling coupler at room temperature in a cryomodule at STF”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WEP45, pp. XX-XX.
[n] G. Stover, “Beam Profile Monitor System for the Bevalac Transfer Line”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1988-1991.
[n] L. Shang, W. Wang, J. Hong, Y. M. Lu, and Y. Zhang, “The Upgrading of HLS Linac Modulators”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU451, pp. 434-436.
[n] C. W. O. Ostenfeld and M. Pedersen, “Cryogenic In-vacuum Undulator at Danfysik”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD006, pp. 3093-3095.
[n] K. McGee et al., “Flux expulsion and material properties of Niobium explored in 644-650 MHz cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3018-3021. doi:10.18429/JACoW-IPAC2023-WEPA157
[n] M. K. Dey et al., “Coil Centering Of The Kolkata Superconducting Cyclotron Magnet”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 438-440.
[n] V. V. Danilov et al., “The Concept of Round Colliding Beams”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP007L, pp. 1149-1151.
[n] I. Neththikumara, R. M. Bodenstein, S. A. Bogacz, T. Satogata, and A. Vandenhoeke, “Linac Optics Optimization with Multi-Objective Optimization”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 572-575. doi:10.18429/JACoW-IPAC2022-MOPOTK050
[n] G. Georgsson, N. Hauge, and S. P. M?©ller, “A STATE-OF-THE-ART 3 GEV BOOSTER FOR ASP”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF024, pp. 2317-2319.
[n] E. M?â and G. Franchetti, “Summary of Working Group A on Beam Dynamics in High-Intensity Circular Machines”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper FROP01, pp. 691-695.
[n] S. Condamoor et al., “Machine Studies with Libera Instruments at the SLAC Spear3 Accelerators”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 284-288. doi:10.18429/JACoW-IBIC2018-TUPB12
[n] K. Poor Rezaei, R. B. Fiorito, and R. A. Kishek, “New Technique to Measure the Emittance of Beams with Space Charge”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA20, pp. 931-933.
[n] T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2249-2251. doi:10.18429/JACoW-IPAC2021-TUPAB322
[n] E. C. Hartwig, “PEP II RF System”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3621-3623.
[n] B. Z. L. Moreno, R. M. Caliari, R. R. Geraldes, and M. A. L. Moraes, “Rapid Control Prototyping Tool for the Sirius High-Dynamic DCM Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1941-1946. doi:10.18429/JACoW-ICALEPCS2017-THPHA214
[n] D. V. Pestrikov, “On Landau Damping of Collective Beam-Beam Modes”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3687-3690.
[n] F. Naito et al., “Mechanical and RF Properties of The DTL for The JAERI/KEK Joint Project”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU424, pp. 359-361.
[n] M. McGee and Y. M. Pischalnikov, “Mechanical Stability Study of Capture Cavity II at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN103, pp. 2274-2276.
[n] J. C. Huang et al., “A Mechanical Undulator Frame to Minimize Intrinsic Phase Errors”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 69-71. doi:10.18429/JACoW-MEDSI2018-TUPH19
[n] P. Ilinski, “Optimization of NSLS-II Blade X-ray Beam Position Monitors: From Photoemission Type to Diamond Detector”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC10, pp. 67-70.
[n] J. A. Diaz Cruz, S. Biedron, M. Mart?¡nez-Ram??n, R. Pirayesh, and S. Sosa, “Machine Learning-Based LLRF and Resonance Control of Superconducting Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 920-923. doi:10.18429/JACoW-IPAC2021-MOPAB290
[n] E. Boggasch et al., “A Plasma Lens for the CERN Antiproton Collector Scaled from Model and Experiment”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1975-1978.
[n] Y. Yu et al., “The X-Band Linear Compression System in Dalian Coherent Light Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 625-628. doi:10.18429/JACoW-FEL2019-THP015
[n] H. Ghasem, E. Ahmadi, and F. Saeidi, “Preliminary Design of Transfer Lines for the ILSF Accelerator Complex”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA012, pp. 2153-2155.
[n] E. Ros, L. Malin, R. DeMott, S. Teitelbaum, S. Tilton, and W. Graves, “Simulation of CXFEL with MITHRA code”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 327-330. doi:10.18429/JACoW-IPAC2024-MOPG13
[n] D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
[n] O. Silveira and F. de Sá, “MENT algorithm for transverse phase space reconstruction at SIRIUS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM035, unpublished.
[n] R. Kuroda et al., “Characterization of Electron Beam from a Mg Photo-cathode RF Gun System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI074, pp. 1783-1785.
[n] A. Ghiorso et al., “The Bevalac--An Economical Facility for Very Energetic Heavy Particle Research”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 155-159.
[n] B. Singh, A. Ramezani Moghaddam, and I. Martin, “Further investigations into the impacts of insertion devices on the Diamond-II lattice”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1258-1261. doi:10.18429/JACoW-IPAC2024-TUPG21
[n] V. B. Zilli et al., “Installation and Commissioning of the Exactly-Constrained X-Ray Mirror Systems for Sirius/LNLS”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 33. doi:10.18429/JACoW-MEDSI2020-MOPB06
[n] K. Vijayan, M. T. Heron, and S. J. Singleton, “Diamond Light Source Control Systems Relational RDB”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD52, pp. 87-89.
[n] N. A. Mezentsev et al., “Design of a Superconducting Wiggler for the PLS”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2751-2754.
[n] J. H. Yue et al., “Consideration and Design of HEPS Beam Instrumentation”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper THPP31, unpublished.
[n] N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
[n] S. R. Carriere, D. Beauregard, B. A. Schneider, G. A. Steel, and D. M. Taylor, “A Novel Filter Auto-Mounter for the BioXAS Beamlines at the CLS”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 357-359. doi:10.18429/JACoW-MEDSI2016-WEPE29
[n] L. S?©by, G. Baud, M. Bozzolan, and R. Scrivens, “New Beam Position Monitors for the CERN LINAC3 to LEIR Ion Beam Transfer Line”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 293-296. doi:10.18429/JACoW-IBIC2018-TUPB14
[n] M. R. A. Zuboraj et al., “High Gradient Conditioning and Performance of C-Band ?ƒ=0.5 Proton Normal- Conducting Copper and Copper-Silver Radio-Frequency Accelerating Cavities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1567-1569. doi:10.18429/JACoW-IPAC2022-TUPOMS060
[n] M. Koujili et al., “Fast and High Accuracy Wire Scanner”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB11, pp. 188-190.
[n] P. Schmueser, “Field Quality Issues in Superconducting Magnets”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 37-42.
[n] W. Kaabi et al., “PERLE: a novel facility for ERL development and applications in multi-turn configuration and high-power regime”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEOGC3, unpublished.
[n] Q. A. Kerns and H. W. Miller, “100 kW RF Power Amplifier”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 246-249.
[n] J. R. Hoffman, B. Blue, F. M. Espiau, C. Joshi, K. Marsh, and P. Muggli, “On the Possibility of a 1016 cm-3 Density, 1 Meter Long Plasma for Accelerator Applications”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH151, pp. 4026-4028.
[n] N. Alinovsky et al., “A Hydrogen Ion Beam Method of Molecular Density Measurement Inside a 4.2 K. Beam Tube”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2509-2512.
[n] R. Johnson, S. Smith, N. Kurita, K. Kishiyama, and J. Hinkson, “Calibration of the Beam-Position Monitor System for the SLAC PEP-II B Factory”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P083, pp. 2110-2112.
[n] A. C. de Lira, P. Bellomo, J. J. Lipari, and F. S. Rafael, “PEP-II Large Power Supplies Rebuild Program at SLAC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE066, pp. 3685-3687.
[n] H. Hayano, “The KEK Accelerator Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY03T, pp. 27-31.
[n] M. Shibata, T. Ishii, S. Kanazawa, Y. Sugiyama, S. Takeuchi, and T. Yoshida, “RF Performances of Superconducting Resonators for the JAERI Tandem Booster”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I35, pp. XX-XX.
[n] K. Tsuchiya et al., “Cryomodule Development for Superconducting RF Test Facility (STF) at KEK”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH190, pp. 505-507.
[n] M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1707-1710.
[n] M. Sosin, T. Blaszczyk, A. Herty, J. Jaros, and H. Mainaud Durand, “Design and Study of a 6 Degree-Of-Freedom Universal Adjustment Platform for HL-LHC Components”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3720-3722. doi:10.18429/JACoW-IPAC2019-THPGW058
[n] W. P. Jones and G. P. A. Berg, “Design of a Beam Transport System for a Proton Radiation Therapy Facility”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP115, pp. 2519-2521.
[n] Q. A. Kerns, J. E. Katz, and G. S. Tool, “Ferrite Measurements for Synchrotron RF Accelerating System Design”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 185-191.
[n] A. Chabert, G. Gendreau, P. Lapostolle, and P. Yvon, “Bunch Length Compression Inside a Separated Sector Isochronous Cyclotron and Related Problems”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2122-2125.
[n] A. Fontenille, M. Laamyem, V. Nibart, and J. M. de Conto, “The PIAFE Project at Grenoble: Beam Transport of a Very Low Energy Radioactive Beam”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP068G, pp. 2423-2425.
[n] C. D. Moore et al., “Single Bunch Intensity Monitoring System Using an Improved Wall Current Monitor”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1513-1516.
[n] C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1138-1142. doi:10.18429/JACoW-ICALEPCS2015-THHC3O03
[n] P. Fournier et al., “CERN PS Laser Ion Source Development”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODR5, pp. 103-105.
[n] D. S. Todd et al., “High Current Beam Extraction from the 88-Inch Cyclotron at LBNL”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MO2PB02, pp. 19-21.
[n] A. A. Sahai, T. C. Katsouleas, W. B. Mori, and F. S. Tsung, “Long Term Evolution of Plasma Wakefields”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC10, pp. 90-92.
[n] F. Gerigk et al., “Production Design of the Drift Tube Linac for the CERN Linac4”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper TUP066, pp. 560-562.
[n] D. L. Friesel, J. C. Collins, and W. P. Jones, “Isochronization Studies of the IUCF 200 MeV Cyclotron”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3389-3392.
[n] H. Akiyama, K. Hiramoto, and H. Kubo, “Development of Magnet Power Supply System for Fast Pattern Excitation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A04, pp. 2196-2198.
[n] T. Bergmark et al., “Activities at CELSIUS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 202-205.
[n] A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2948-2951. doi:10.18429/JACoW-IPAC2019-WEPRB060
[n] C. T. Chen, K. T. Hsu, K. H. Hu, C. H. Kuo, and K. K. Lin, “Compensation Scheme of Elliptical Polarization from Bending Magnet at SRRC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP32C, pp. 1664-1666.
[n] A. Krasnykh, V. Ivanov, L. Ives, G. Miram, G. Scheitrum, and D. Sprehn, “3D Modeling Activity for Novel High Power Electron Guns at SLAC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB011, pp. 3312-3314.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Lorkiewicz, “A Miniature H- Ion Source for the C-30 Compact Cyclotron at Swierk”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP086L, pp. 1528-1529.
- R. Kieffer et al., “The Beam Gas Vertex Profile Monitoring Station for HL-LHC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2672-2675.
- M. Schmoekel et al., “String Assembly for the EU-XFEL 3.9 GHz Module at DESY”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB105, pp. 869-873.
- A. Drago et al., “Multi-Bunch Longitudinal Dynamics and Diagnostics via a Digital Feedback System at PEP-II, DAFNE, ALS and SPEAR”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEOB01A, pp. 296-298.
- J. Gronberg, A. Abbott, C. G. Brown, J. A. Clarke, J. B. Javedani, and W. T. Piggott, “Design of a Pulsed Flux Concentrator for the ILC Positron Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC037, pp. 4137-4139.
- M. Wake et al., “Switching Power Supply for Induction Accelerators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN042, pp. 251-253.
- A. C. Caruso, F. Consoli, A. Longhitano, A. Spart?á, and L. Xia, “New PC-Based Control for the RF System at INFN/LNS”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP040, pp. 744-746.
- M. Chatterjee, D. Koley, and P. Y. Nabhiraj, “Development of an Ethernet Enabled Microcontroller Based Module for Superconducting Cyclotron ECR Beamline Control”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD39, pp. 73-75.
- D. Kelliher et al., “Adiabatic capture in high-intensity, high-power rings”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS005, this conference.
- Z.-K. Liu et al., “Operation of TPS 300 kW solid-state amplifier”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR32, pp. 1492-1494.
- S. Wijethunga et al., “Electron cloud measurements in Fermilab booster”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA093, pp. 2858-2861.
- M. Bertucci et al., “Quench and Field Emission Diagnostics for the ESS Medium-Beta Prototypes Vertical Tests at LASA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1007-1010.
- W. Butcher, C. Welsch, H. Zhang, M. Patel, N. Kumar, and O. Stringer, “Experimental study into the invasiveness of a gas jet beam profile monitor for charged particle beams”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPG19, pp. 2229-2231.
- A. Denker et al., “Status of the HZB Cyclotron”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT002, pp. 31-33.
- E. Kashy, P. S. Miller, and J. A. Nolen, “Beam Emittance Measurements with a Dispersion-Matched Magnetic Spectrograph”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-07, pp. 2334-2336.
- G. Bischof, A. M, B. A, and A. Walter, “A General Solution for Complex Vacuum System Controls”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 30-34.
- L. Bartelson et al., “A Second Long Pulse Modulator for TESLA Using IGBTs”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP048G, pp. 2585-2587.
- Y. Chung et al., “Local Beam Position Feedback Experiments on the ESRF Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ15, pp. 2699-2701.
- H. C. Chao, I. V. Agapov, and S. A. Antipov, “Design Considerations of a High Intensity Booster for PETRA IV”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1386-1389.
- A. Buechner et al., “Pulsed RF System for the ELBE Superconducting Accelerator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH151, pp. 411-412.
- M. Tomizawa et al., “Beam instability suppression during debunching process through slippage factor tuning in the J-PARC Main Ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM028, this conference.
- C. W. O. Ostenfeld and M. Pedersen, “Wigglers at Danfysik”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA001, pp. 2123-2125.
- P. Denham et al., “Developments and characterization of a gas jet ionization imaging optical column”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL147, pp. 4810-4813.
- J. F. Schmidt, O. Boldt, F. Frommberger, W. Hillert, and J.-P. Thiry, “Optimizing Polarization with an Improved Integer Resonance Correction Scheme at ELSA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1108-1110.
- P. Muggli et al., “Status of the Plasma Wakefield Acceleration Experiment at the Stanford Linear Accelerator Center”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPC008, pp. 122-125.
- E. S. Masunov and N. E. Vinogradov, “Methods of Ion Focusing and Acceleration in RF Field Containing Nonsynchronous Harmonics”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP05K, pp. 740-742.
- M. A. Nozdrin, N. Balalykin, V. F. Minashkin, G. Shirkov, and S. Weisse, “Diagnostics at JINR LHEP Photogun Bench”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 117-119.
- E. Ciapala et al., “Longitudinal Feedback in LEP”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2358-2361.
- M. M. Karliner et al., “HIGH-CURRENT STANDING WAVE LINAC WITH GYROCON POWER SOURCE”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THCP02, pp. XX-XX.
- A. Nadji, M. Belgroune, P. Brunelle, and L. Nadolski, “Refined Tracking Procedure for the SOLEIL Energy Acceptance Calculations”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB034, pp. 896-898.
- Y. Hashimoto et al., “Multi-Ribbon Profile Monitor Using Carbon Graphite Foil for J-PARC”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2A01, pp. 429-433.
- A. C. Crawford, S. Nagaitsev, A. Sharapa, and A. Shemyakin, “Successful MeV-Range Electron Beam Recirculation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP08C, pp. 1049-1051.
- L. P. Robertson, E. G. Auld, G. H. Mackenzie, and A. J. Otter, “Extraction of Multiple Beams of Various Energies from the TRIUMF Negative Ion Isochronous Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C10, pp. XX-XX.
- O. Boldt, A. Dieckmann, F. Frommberger, and W. Hillert, “A New Correction Scheme to Compensate Depolarizing Integer Resonances at ELSA”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP003, pp. 1507-1509.
- P.-C. Chiu, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and C. Wu, “TLS orbit feedback upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL141, pp. 4798-4801.
- A. E. Wheelhouse et al., “Daresbury International Cryomodule Coupler Progress”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEC048, pp. 2998-3000.
- H. R. Kremers, J. P. M. Beijers, S. Brandenburg, V. Mironov, and S. Saminathan, “Detailed Investigation of the 4D Phase-Space of an Ion Beam”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper TUZO02, pp. 30-33.
- R. A. Erickson, E. Guerra, M. Stanek, Z. Van Hoover, and J. Warren, “A New Control Room for SLAC Accelerators”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR029, pp. 4029-4031.
- M. A. Gordon, Y. K. Kim, and J. M. Maxson, “The Effects of Stochastic Space Charge in High Brightness Photolectron Beamlines for Ultrafast Electron Diffraction”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3283-3285.
- P. Korysko et al., “VHEE FLASH radiotherapy: cutting-edge research at CLEAR, the CERN Linear Electron Accelerator for Research”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM002, this conference.
- G. Asova et al., “Recent Measurements of the Longitudinal Phase Space at PITZ”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper WEPPH009, pp. 342-345.
- J. R. Chen, C. K. Kuan, K. Y. Kuo, and D. J. Wang, “The Mechanical Stability of the Electron Beam Position Monitor at the Taiwan Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B16, pp. 2429-2431.
- V. G. Vaccaro et al., “Optimization Design of a Side Coupled Linac (SCL) for Protontherapy: a New Feeding Solution”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS048, pp. 1603-1605.
- S. Baird and J. Safranek, “Commissioning of the SSRL Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2865-2868.
- P. K. Skowronski, E. Forest, F. Schmidt, and R. de Maria, “New Developments of MAD-X UsingPTC”, in Proc. 9th Int. Computational Accelerator Physics Conf. (ICAP'06), Chamonix, Switzerland, Oct. 2006, paper WEPPP12, pp. 209-212.
- L. R. Carver et al., “Usage of the Transverse Damper Observation Box for High Sampling Rate Transverse Position Data in the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 389-392.
- V. Leurent et al., “Ultra-short x-ray Radiation coming from a Laser Wakefield Accelerator”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP134, pp. 2809-2811.
- M. A. Hofstee, S. Brandenburg, H. Post, R. A. Schellekens, and J. E. de Jong, “Improving the Energy Efficiency, Reliability and Performance of AGOR”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MO2PB04, pp. 25-27.
- M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2515-2518.
- M. Arnold, T. Kuerzeder, J. Pforr, N. Pietralla, M. Steinhorst, and F. Hug, “Construction of a Third Recirculation for the S-DALINAC”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 168-170.
- M. Attal et al., “Commissioning of SESAME Booster”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2880-2882.
- H. L. Andrews et al., “An Investigation of Electron Beam Divergence from a Single DFEA Emitter Tip”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4662-4664.
- T. Ladzinski, F. Havart, P. Ninin, E. Sanchez-Corral Mena, F. Valentini, and D. Vaxelaire, “New Concepts for Access Devices in the SPS Personnel Protection System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1608-1612.
- E. A. Medvedko, R. G. Johnson, S. R. Smith, and G. R. White, “New Beam Monitoring Instrumentation at ATF2, KEK”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM027, pp. 173-176.
- Q. L. Peng et al., “Development of a Quadrupole Magnet for CSNS DTL”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP062, pp. 551-553.
- N. Steinhau-Kuehl, R. Bandelmann, D. Kostin, A. Matheisen, M. Schmoekel, and J. K. Sekutowicz, “Vertical Electro-Polishing at DESY of a 1.3 GHz Gun Cavity for CW Application”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB103, pp. 399-403.
- R. Apiwatwaja, P. Songsiriritthigul, W. Pairsuwan, T. Ishii, and G. Isoyama, “The Recent Progress of Siam Photon Laboratory”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper WEM104, pp. XX-XX.
- L. P. Roobol, S. Brandenburg, and H. Post, “Vertical Perturbation of High Energy Proton Beams in the AGOR Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P4-10, pp. XX-XX.
- S. Prabhakar, J. D. Fox, and D. Teytelman, “New Diagnostics and Cures for Coupled-Bunch Instabilities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOAA002, pp. 300-304.
- S. Brandenburg and L. de Vries, “A Subharmonic Buncher for the AGOR-Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-11, pp. 193-195.
- D. Shuman, E. Henestroza, G. Ritchie, D. L. Vanecek, W. Waldron, and S. Yu, “A Pulsed Solenoid for Intense Ion Beam Transport”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPT069, pp. 3798-3800.
- T. Saeki et al., “The first processing of capacitive-coupling coupler at room temperature in a cryomodule at STF”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WEP45, pp. XX-XX.
- G. Stover, “Beam Profile Monitor System for the Bevalac Transfer Line”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1988-1991.
- L. Shang, W. Wang, J. Hong, Y. M. Lu, and Y. Zhang, “The Upgrading of HLS Linac Modulators”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU451, pp. 434-436.
- C. W. O. Ostenfeld and M. Pedersen, “Cryogenic In-vacuum Undulator at Danfysik”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD006, pp. 3093-3095.
- K. McGee et al., “Flux expulsion and material properties of Niobium explored in 644-650 MHz cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA157, pp. 3018-3021.
- M. K. Dey et al., “Coil Centering Of The Kolkata Superconducting Cyclotron Magnet”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 438-440.
- V. V. Danilov et al., “The Concept of Round Colliding Beams”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP007L, pp. 1149-1151.
- I. Neththikumara, R. M. Bodenstein, S. A. Bogacz, T. Satogata, and A. Vandenhoeke, “Linac Optics Optimization with Multi-Objective Optimization”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 572-575.
- G. Georgsson, N. Hauge, and S. P. M?©ller, “A STATE-OF-THE-ART 3 GEV BOOSTER FOR ASP”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF024, pp. 2317-2319.
- E. M?â and G. Franchetti, “Summary of Working Group A on Beam Dynamics in High-Intensity Circular Machines”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper FROP01, pp. 691-695.
- S. Condamoor et al., “Machine Studies with Libera Instruments at the SLAC Spear3 Accelerators”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 284-288.
- K. Poor Rezaei, R. B. Fiorito, and R. A. Kishek, “New Technique to Measure the Emittance of Beams with Space Charge”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPBA20, pp. 931-933.
- T. Hakulinen, S. Di Luca, G. Godineau, R. Nunes, and G. Smith, “Redesign and Upgrade of the LHC Access Control System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2249-2251.
- E. C. Hartwig, “PEP II RF System”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3621-3623.
- B. Z. L. Moreno, R. M. Caliari, R. R. Geraldes, and M. A. L. Moraes, “Rapid Control Prototyping Tool for the Sirius High-Dynamic DCM Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1941-1946.
- D. V. Pestrikov, “On Landau Damping of Collective Beam-Beam Modes”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3687-3690.
- F. Naito et al., “Mechanical and RF Properties of The DTL for The JAERI/KEK Joint Project”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU424, pp. 359-361.
- M. McGee and Y. M. Pischalnikov, “Mechanical Stability Study of Capture Cavity II at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN103, pp. 2274-2276.
- J. C. Huang et al., “A Mechanical Undulator Frame to Minimize Intrinsic Phase Errors”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 69-71.
- P. Ilinski, “Optimization of NSLS-II Blade X-ray Beam Position Monitors: From Photoemission Type to Diamond Detector”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC10, pp. 67-70.
- J. A. Diaz Cruz, S. Biedron, M. Mart?¡nez-Ram??n, R. Pirayesh, and S. Sosa, “Machine Learning-Based LLRF and Resonance Control of Superconducting Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 920-923.
- E. Boggasch et al., “A Plasma Lens for the CERN Antiproton Collector Scaled from Model and Experiment”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1975-1978.
- Y. Yu et al., “The X-Band Linear Compression System in Dalian Coherent Light Source”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 625-628.
- H. Ghasem, E. Ahmadi, and F. Saeidi, “Preliminary Design of Transfer Lines for the ILSF Accelerator Complex”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA012, pp. 2153-2155.
- E. Ros, L. Malin, R. DeMott, S. Teitelbaum, S. Tilton, and W. Graves, “Simulation of CXFEL with MITHRA code”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPG13, pp. 327-330.
- D. J. Martin, S. Allison, B. Scott, J. J. Sebek, and T. A. Trautwein, “Evaluation of Bergoz Instrumentation NPCT”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP034, pp. 4021-4023.
- O. Silveira and F. de Sá, “MENT algorithm for transverse phase space reconstruction at SIRIUS”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM035, this conference.
- R. Kuroda et al., “Characterization of Electron Beam from a Mg Photo-cathode RF Gun System”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI074, pp. 1783-1785.
- A. Ghiorso et al., “The Bevalac--An Economical Facility for Very Energetic Heavy Particle Research”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 155-159.
- B. Singh, A. Ramezani Moghaddam, and I. Martin, “Further investigations into the impacts of insertion devices on the Diamond-II lattice”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG21, pp. 1258-1261.
- V. B. Zilli et al., “Installation and Commissioning of the Exactly-Constrained X-Ray Mirror Systems for Sirius/LNLS”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 33.
- K. Vijayan, M. T. Heron, and S. J. Singleton, “Diamond Light Source Control Systems Relational RDB”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper WEPD52, pp. 87-89.
- N. A. Mezentsev et al., “Design of a Superconducting Wiggler for the PLS”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2751-2754.
- J. H. Yue et al., “Consideration and Design of HEPS Beam Instrumentation”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper THPP31, unpublished.
- N. Dikansky, V. Parkhomchuk, A. Skrinsky, and V. Yakimenko, “Novosibirsk Tau-Charm Factory Design Study”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAR11, pp. 819-821.
- S. R. Carriere, D. Beauregard, B. A. Schneider, G. A. Steel, and D. M. Taylor, “A Novel Filter Auto-Mounter for the BioXAS Beamlines at the CLS”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 357-359.
- L. S?©by, G. Baud, M. Bozzolan, and R. Scrivens, “New Beam Position Monitors for the CERN LINAC3 to LEIR Ion Beam Transfer Line”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 293-296.
- M. R. A. Zuboraj et al., “High Gradient Conditioning and Performance of C-Band ?ƒ=0.5 Proton Normal- Conducting Copper and Copper-Silver Radio-Frequency Accelerating Cavities”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1567-1569.
- M. Koujili et al., “Fast and High Accuracy Wire Scanner”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB11, pp. 188-190.
- P. Schmueser, “Field Quality Issues in Superconducting Magnets”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 37-42.
- W. Kaabi et al., “PERLE: a novel facility for ERL development and applications in multi-turn configuration and high-power regime”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEOGC3, unpublished.
- Q. A. Kerns and H. W. Miller, “100 kW RF Power Amplifier”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 246-249.
- J. R. Hoffman, B. Blue, F. M. Espiau, C. Joshi, K. Marsh, and P. Muggli, “On the Possibility of a 1016 cm-3 Density, 1 Meter Long Plasma for Accelerator Applications”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH151, pp. 4026-4028.
- N. Alinovsky et al., “A Hydrogen Ion Beam Method of Molecular Density Measurement Inside a 4.2 K. Beam Tube”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2509-2512.
- R. Johnson, S. Smith, N. Kurita, K. Kishiyama, and J. Hinkson, “Calibration of the Beam-Position Monitor System for the SLAC PEP-II B Factory”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P083, pp. 2110-2112.
- A. C. de Lira, P. Bellomo, J. J. Lipari, and F. S. Rafael, “PEP-II Large Power Supplies Rebuild Program at SLAC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE066, pp. 3685-3687.
- H. Hayano, “The KEK Accelerator Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY03T, pp. 27-31.
- M. Shibata, T. Ishii, S. Kanazawa, Y. Sugiyama, S. Takeuchi, and T. Yoshida, “RF Performances of Superconducting Resonators for the JAERI Tandem Booster”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I35, pp. XX-XX.
- K. Tsuchiya et al., “Cryomodule Development for Superconducting RF Test Facility (STF) at KEK”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH190, pp. 505-507.
- M. K. Craddock et al., “The TRIUMF Kaon Factory”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1707-1710.
- M. Sosin, T. Blaszczyk, A. Herty, J. Jaros, and H. Mainaud Durand, “Design and Study of a 6 Degree-Of-Freedom Universal Adjustment Platform for HL-LHC Components”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3720-3722.
- W. P. Jones and G. P. A. Berg, “Design of a Beam Transport System for a Proton Radiation Therapy Facility”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP115, pp. 2519-2521.
- Q. A. Kerns, J. E. Katz, and G. S. Tool, “Ferrite Measurements for Synchrotron RF Accelerating System Design”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 185-191.
- A. Chabert, G. Gendreau, P. Lapostolle, and P. Yvon, “Bunch Length Compression Inside a Separated Sector Isochronous Cyclotron and Related Problems”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2122-2125.
- A. Fontenille, M. Laamyem, V. Nibart, and J. M. de Conto, “The PIAFE Project at Grenoble: Beam Transport of a Very Low Energy Radioactive Beam”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP068G, pp. 2423-2425.
- C. D. Moore et al., “Single Bunch Intensity Monitoring System Using an Improved Wall Current Monitor”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1513-1516.
- C. Pascual-Izarra et al., “Effortless Creation of Control & Data Acquisition Graphical User Interfaces with Taurus”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1138-1142.
- P. Fournier et al., “CERN PS Laser Ion Source Development”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MODR5, pp. 103-105.
- D. S. Todd et al., “High Current Beam Extraction from the 88-Inch Cyclotron at LBNL”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MO2PB02, pp. 19-21.
- A. A. Sahai, T. C. Katsouleas, W. B. Mori, and F. S. Tsung, “Long Term Evolution of Plasma Wakefields”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC10, pp. 90-92.
- F. Gerigk et al., “Production Design of the Drift Tube Linac for the CERN Linac4”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper TUP066, pp. 560-562.
- D. L. Friesel, J. C. Collins, and W. P. Jones, “Isochronization Studies of the IUCF 200 MeV Cyclotron”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3389-3392.
- H. Akiyama, K. Hiramoto, and H. Kubo, “Development of Magnet Power Supply System for Fast Pattern Excitation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A04, pp. 2196-2198.
- T. Bergmark et al., “Activities at CELSIUS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 202-205.
- A. Salom, J. M. Alvarez, B. Bravo, and F. P?®rez, “HOM Damped Normal Conducting 1.5 GHz Cavity Design Evolution for the 3rd Harmonic System of the ALBA Storage Ring”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2948-2951.
- C. T. Chen, K. T. Hsu, K. H. Hu, C. H. Kuo, and K. K. Lin, “Compensation Scheme of Elliptical Polarization from Bending Magnet at SRRC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP32C, pp. 1664-1666.
- A. Krasnykh, V. Ivanov, L. Ives, G. Miram, G. Scheitrum, and D. Sprehn, “3D Modeling Activity for Novel High Power Electron Guns at SLAC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB011, pp. 3312-3314.
Back to search