Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Thomas et al., “X-Ray Absorber Design and Calculations for the EBS Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 257-261. doi:10.18429/JACoW-MEDSI2016-WEAA02
[n] A. A. Sidorin et al., “A Method for Measuring the Positron Lifetime in Solid Matter with a Continuous Positron Beam”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 267-269. doi:10.18429/JACoW-RUPAC2018-TUPSA58
[n] E. Bulyak and A. Mytsykov, “Method of Defining the Tolerances of Storage Ring Lenses for Imperfections and Misalignments”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1619-1622.
[n] S. Golge and B. Vlahovic, “REVIEWOF LOW-ENERGY POSITRON BEAM FACILITIES”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD025, pp. 1464-1466.
[n] H. C. Liu et al., “High Power Conditioning of the DTL-1 for CSNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4207-4209. doi:10.18429/JACoW-IPAC2017-THPIK049
[n] S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 329-331. doi:10.18429/JACoW-SRF2019-MOP101
[n] M. BastaniNejad et al., “Field Emission Measurements from Niobium Electrodes”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP287, pp. 2020-2022.
[n] H. V. Smith Jr and J. D. Schneider, “Status Update on the Low-Energy Demonstration Accelerator LEDA”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4014, pp. 418-420.
[n] R. S. Livingston, “Session IV Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182.
[n] P. Sichta, J. Dong, G. Oliaro, and P. Roney, “Overview of the NSTX Control System”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUBT004, pp. XX-XX.
[n] J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527.
[n] J. J. Kritzinger, A. M??ller, and H. A. Smit, “Experience with Electrical Contact Systems for Radio Frequencies at NAC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-25, pp. 261-264.
[n] J. DeLong, J. M. Brennan, T. Hayes, N. Le, and K. S. Smith, “A Bunch to Bucket Phase Detector Using Digital Receiver Technology”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB025, pp. 3341-3343.
[n] E. S. Kotov, A. M. Batrakov, G. A. Fatkin, A. V. Pavlenko, K. S. Shtro, and M. Yu. Vasilyev, “VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator (LIA-20)”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1291-1293. doi:10.18429/JACoW-ICALEPCS2017-THMPL09
[n] J. W. Angle, E. M. Lechner, A. D. Palczewski, C. E. Reece, M. J. Kelley, and F. A. Stevie, “A SIMS Approach for the Analysis of Furnace Contamination”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 406. doi:10.18429/JACoW-SRF2021-TUPFDV004
[n] M. Y. Park, H. J. Kwon, Y. H. Kim, J. H. Jang, and Y. S. Cho, “DTL Fabrication Status of PEFP Linac”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21008, pp. XX-XX.
[n] H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Thomas et al., “X-Ray Absorber Design and Calculations for the EBS Storage Ring”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 257-261.
- A. A. Sidorin et al., “A Method for Measuring the Positron Lifetime in Solid Matter with a Continuous Positron Beam”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 267-269.
- E. Bulyak and A. Mytsykov, “Method of Defining the Tolerances of Storage Ring Lenses for Imperfections and Misalignments”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1619-1622.
- S. Golge and B. Vlahovic, “REVIEWOF LOW-ENERGY POSITRON BEAM FACILITIES”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD025, pp. 1464-1466.
- H. C. Liu et al., “High Power Conditioning of the DTL-1 for CSNS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4207-4209.
- S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 329-331.
- M. BastaniNejad et al., “Field Emission Measurements from Niobium Electrodes”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP287, pp. 2020-2022.
- H. V. Smith Jr and J. D. Schneider, “Status Update on the Low-Energy Demonstration Accelerator LEDA”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4014, pp. 418-420.
- R. S. Livingston, “Session IV Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59D02, pp. 182-182.
- P. Sichta, J. Dong, G. Oliaro, and P. Roney, “Overview of the NSTX Control System”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUBT004, pp. XX-XX.
- J. M. Han et al., “Design and Fabrication of the KOMAC RFQ”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA61, pp. 3525-3527.
- J. J. Kritzinger, A. M??ller, and H. A. Smit, “Experience with Electrical Contact Systems for Radio Frequencies at NAC”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-25, pp. 261-264.
- J. DeLong, J. M. Brennan, T. Hayes, N. Le, and K. S. Smith, “A Bunch to Bucket Phase Detector Using Digital Receiver Technology”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB025, pp. 3341-3343.
- E. S. Kotov, A. M. Batrakov, G. A. Fatkin, A. V. Pavlenko, K. S. Shtro, and M. Yu. Vasilyev, “VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator (LIA-20)”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1291-1293.
- J. W. Angle, E. M. Lechner, A. D. Palczewski, C. E. Reece, M. J. Kelley, and F. A. Stevie, “A SIMS Approach for the Analysis of Furnace Contamination”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 406.
- M. Y. Park, H. J. Kwon, Y. H. Kim, J. H. Jang, and Y. S. Cho, “DTL Fabrication Status of PEFP Linac”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21008, pp. XX-XX.
- H. N. Jungwirth and D. P. Brombach, “A Novel Concept for Superconducting Ring-Cyclotron Magnets”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper G2-10, pp. 498-501.
Back to search