Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Hu, D. Bafia, and Y.-K. Kim, “Origins of quench in buffered chemical polished and low temperature baked SRF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3082-3085. doi:10.18429/JACoW-IPAC2023-WEPA190
[n] M. Munoz and D. B. Beltran, “Initial Design of a Global Fast Orbit Feedback System for the ALBA Synchrotron”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA23, pp. 561-563.
[n] K. H. Park, D. E. Kim, B. K. Kang, J. S. Chai, Y. S. Kim, and I. S. Jung, “Current Mode Transimpedance Amplifier for Beam Current Measurement”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP13002, pp. XX-XX.
[n] V. S. Kashikhin et al., “Magnets for the MANX 6-D Muon Cooling Demonstration Experiment”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS012, pp. 461-463.
[n] O. A. Anderson and B. Grant Logan, “Low Emittance Beam Extraction from Laser-Driven Multicharged Ion Sources”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP44C, pp. 1385-1387.
[n] G. Paraskaki et al., “Impact of Electron Beam Energy Chirp on Seeded FELs”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 238-241. doi:10.18429/JACoW-FEL2019-TUP078
[n] S. Ackermann et al., “High-Repetition-Rate Seeding Schemes Using a Resonator-Amplifier Setup”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 222-225. doi:10.18429/JACoW-FEL2019-TUP073
[n] S. G. Seddon-Stettler, M. Liepe, T. E. Oseroff, N. Sitaraman, and Z. Sun, “Surface Characterization Studies of Gold-Plated Niobium”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 290-292. doi:10.18429/JACoW-SRF2023-MOPMB076
[n] C. C. Lo, J. Julian, K. Baptiste, and B. Taylor, “A New Window Coating System and a New Window for the ALS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA168, pp. 1471-1473.
[n] M. Mu??oz and D. Einfeld, “Optics for the ALBA Lattice”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE069, pp. 3777-3779.
[n] P. Berkvens, M. Renouf, and T. Ring, “The ESRF Accelerator Facility Personnel Safety System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1637-1639.
[n] Y. Morozumi, F. Furuta, T. Higo, T. Saeki, and K. Saito, “Revision of Accelerating and Damping Structures for KEK STF 45 MV/m Accelerator Modules”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAKI03, pp. 2575-2577.
[n] P. Niknejadi et al., “FLASHforward Findings for the EuPRAXIA Design Study and the Next-Generation of Compact Accelerator Facilities”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3619-3623. doi:10.18429/JACoW-IPAC2019-THPGW019
[n] A. L. Li, Z. Peng, and J. Zheng, “Design and Implementation of Superconducting Booster Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1293. doi:10.18429/JACoW-ICALEPCS2019-WEPHA089
[n] I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92.
[n] H. Fujimori et al., “Online Analyzer System for the Development of the Long-lived Charge-Stripping Foil at the J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB058, pp. 1653-1655.
[n] K. Koba, “Status of the Fermilab Main Injector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MOPA005, pp. 27-29.
[n] S. Korenev, “The Concept of Beam Lines from Rhodotron for Radiation Technologies”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB092, pp. 1015-1016.
[n] F. Brandeberry, G. Gunderson, M. Knott, and A. Rauchas, “A Mini-Computer Based DIgital RF Control System for the ZGS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1756-1759.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Hu, D. Bafia, and Y.-K. Kim, “Origins of quench in buffered chemical polished and low temperature baked SRF cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA190, pp. 3082-3085.
- M. Munoz and D. B. Beltran, “Initial Design of a Global Fast Orbit Feedback System for the ALBA Synchrotron”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA23, pp. 561-563.
- K. H. Park, D. E. Kim, B. K. Kang, J. S. Chai, Y. S. Kim, and I. S. Jung, “Current Mode Transimpedance Amplifier for Beam Current Measurement”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP13002, pp. XX-XX.
- V. S. Kashikhin et al., “Magnets for the MANX 6-D Muon Cooling Demonstration Experiment”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS012, pp. 461-463.
- O. A. Anderson and B. Grant Logan, “Low Emittance Beam Extraction from Laser-Driven Multicharged Ion Sources”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP44C, pp. 1385-1387.
- G. Paraskaki et al., “Impact of Electron Beam Energy Chirp on Seeded FELs”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 238-241.
- S. Ackermann et al., “High-Repetition-Rate Seeding Schemes Using a Resonator-Amplifier Setup”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 222-225.
- S. G. Seddon-Stettler, M. Liepe, T. E. Oseroff, N. Sitaraman, and Z. Sun, “Surface Characterization Studies of Gold-Plated Niobium”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB076, pp. 290-292.
- C. C. Lo, J. Julian, K. Baptiste, and B. Taylor, “A New Window Coating System and a New Window for the ALS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA168, pp. 1471-1473.
- M. Mu??oz and D. Einfeld, “Optics for the ALBA Lattice”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE069, pp. 3777-3779.
- P. Berkvens, M. Renouf, and T. Ring, “The ESRF Accelerator Facility Personnel Safety System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1637-1639.
- Y. Morozumi, F. Furuta, T. Higo, T. Saeki, and K. Saito, “Revision of Accelerating and Damping Structures for KEK STF 45 MV/m Accelerator Modules”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THOAKI03, pp. 2575-2577.
- P. Niknejadi et al., “FLASHforward Findings for the EuPRAXIA Design Study and the Next-Generation of Compact Accelerator Facilities”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3619-3623.
- A. L. Li, Z. Peng, and J. Zheng, “Design and Implementation of Superconducting Booster Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1293.
- I. Saleh, Y. S. Dabain, A. Ismail, and M. Mansouri Sharifabad, “Clients Development of SESAME's Control System based on CSS”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO024, pp. 90-92.
- H. Fujimori et al., “Online Analyzer System for the Development of the Long-lived Charge-Stripping Foil at the J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB058, pp. 1653-1655.
- K. Koba, “Status of the Fermilab Main Injector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MOPA005, pp. 27-29.
- S. Korenev, “The Concept of Beam Lines from Rhodotron for Radiation Technologies”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB092, pp. 1015-1016.
- F. Brandeberry, G. Gunderson, M. Knott, and A. Rauchas, “A Mini-Computer Based DIgital RF Control System for the ZGS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1756-1759.
Back to search