Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Q. Yang, Y. Bao, J. Y. Tang, and Y. Zou, “Study on the Collimation Method for a Future Proton-Proton Collider”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1004-1007. doi:10.18429/JACoW-IPAC2018-TUPAK018
[n] M. Boege and J. Chrin, “Integrating Control Systems to Beam Dynamics Applications with CORBA”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPB010, pp. 291-293.
[n] W. A. Reass et al., “Operational Results of the Spallation Neutron Source (SNS) Polyphase Converter-Modulator for the 140 KV Klystron RF System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH110, pp. 1029-1031.
[n] Y. Bao, G. G. Hanson, R. B. Palmer, and D. Stratakis, “End-to-End Simulation of Bunch Merging for a Muon Collider”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2336-2338. doi:10.18429/JACoW-IPAC2015-TUPWI040
[n] J.-Y. Hemery, F. Lemeilleur, R. Olsen, and K. Potter, “Background and Luminosity Monitoring at the CERN ISR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3034-3037.
[n] H. Schopper, “Research with AVF Cyclotrons in Europe”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-002, pp. XX-XX.
[n] J. W. Wang et al., “Fabrication Technologies of the High Gradient Accelerator Structures at 100MV/m Range”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA064, pp. 3819-3821.
[n] C. Bovet, “Present Performance of the CERN 800 MeV PS Booster (PSB)”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 221-226.
[n] J. T. Volk et al., “Correction Magnets for the Fermilab Recycler Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB072, pp. 1766-1768.
[n] S. Appel et al., “Automatized Optimization of Beam Lines Using Evolutionary Algorithms”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1906-1910. doi:10.18429/JACoW-ICALEPCS2017-THPHA196
[n] J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1213-1216.
[n] T. Tajima et al., “LANSCE Vacuum System Improvements in the Last ~10 Years”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1375-1377. doi:10.18429/JACoW-IPAC2019-TUPMP056
[n] T. Okada et al., “Observation of Precise Distribution of Trapped Magnetic Flux Due to Quench by M&T Mapping System”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper TUOFDV02, pp..
[n] W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 380-382. doi:10.18429/JACoW-IPAC2016-MOPMR058
[n] F.-J. Decker et al., “High Intensity Bunch Length Instabilities in the SLC Damping Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3240-3243.
[n] C. Bovet, “Advanced Beam Observation Methods for LEP”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 259-264.
[n] S. V. Sinyatkin et al., “Bending Magnets for the SAGA Storage Ring: Manufacturing and Magnetic Measurements”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF060, pp. 1738-1740.
[n] T. Tajima, L. Civale, and R. K. Schulze, “Research on MgB2 at LANL for the Application to SRF Structures”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB053, pp. 700-702.
[n] S.-H. Wang, J. Corlett, S. M. Lidia, J. Staples, and A. Zholents, “Flat Beam Production in Low Energy Injectors”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG011, pp. 3198-3200.
[n] Y. Ivanyushenkov et al., “Development of a Superconducting Helical Undulator for the ILC Positron Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS069, pp. 706-708.
[n] W. D. Reass et al., “Design and Status of The Polyphase Resonant Converter Modulator System for The Spallation Neutron Source Linear Accelerator”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper WE202, pp. 544-548.
[n] L. H. Yu, J. Galayda, and R. J. Nawrocky, “Studies of Positional Stability of the Electron Beam in the NSLS Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3394-3397.
[n] W. Chupp et al., “Operating Experience with a High Current Cs! Injector for Heavy Ion Fusion”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3389-3392.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Q. Yang, Y. Bao, J. Y. Tang, and Y. Zou, “Study on the Collimation Method for a Future Proton-Proton Collider”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1004-1007.
- M. Boege and J. Chrin, “Integrating Control Systems to Beam Dynamics Applications with CORBA”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPB010, pp. 291-293.
- W. A. Reass et al., “Operational Results of the Spallation Neutron Source (SNS) Polyphase Converter-Modulator for the 140 KV Klystron RF System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH110, pp. 1029-1031.
- Y. Bao, G. G. Hanson, R. B. Palmer, and D. Stratakis, “End-to-End Simulation of Bunch Merging for a Muon Collider”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2336-2338.
- J.-Y. Hemery, F. Lemeilleur, R. Olsen, and K. Potter, “Background and Luminosity Monitoring at the CERN ISR”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3034-3037.
- H. Schopper, “Research with AVF Cyclotrons in Europe”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-002, pp. XX-XX.
- J. W. Wang et al., “Fabrication Technologies of the High Gradient Accelerator Structures at 100MV/m Range”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA064, pp. 3819-3821.
- C. Bovet, “Present Performance of the CERN 800 MeV PS Booster (PSB)”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 221-226.
- J. T. Volk et al., “Correction Magnets for the Fermilab Recycler Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB072, pp. 1766-1768.
- S. Appel et al., “Automatized Optimization of Beam Lines Using Evolutionary Algorithms”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1906-1910.
- J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1213-1216.
- T. Tajima et al., “LANSCE Vacuum System Improvements in the Last ~10 Years”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1375-1377.
- T. Okada et al., “Observation of Precise Distribution of Trapped Magnetic Flux Due to Quench by M&T Mapping System”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper TUOFDV02, pp..
- W. X. Cheng, K. Ha, Y. Tian, and L.-H. Yu, “Precise Beam Orbit Response Measurement with AC Excitation”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 380-382.
- F.-J. Decker et al., “High Intensity Bunch Length Instabilities in the SLC Damping Rings”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3240-3243.
- C. Bovet, “Advanced Beam Observation Methods for LEP”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 259-264.
- S. V. Sinyatkin et al., “Bending Magnets for the SAGA Storage Ring: Manufacturing and Magnetic Measurements”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPKF060, pp. 1738-1740.
- T. Tajima, L. Civale, and R. K. Schulze, “Research on MgB2 at LANL for the Application to SRF Structures”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB053, pp. 700-702.
- S.-H. Wang, J. Corlett, S. M. Lidia, J. Staples, and A. Zholents, “Flat Beam Production in Low Energy Injectors”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG011, pp. 3198-3200.
- Y. Ivanyushenkov et al., “Development of a Superconducting Helical Undulator for the ILC Positron Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS069, pp. 706-708.
- W. D. Reass et al., “Design and Status of The Polyphase Resonant Converter Modulator System for The Spallation Neutron Source Linear Accelerator”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper WE202, pp. 544-548.
- L. H. Yu, J. Galayda, and R. J. Nawrocky, “Studies of Positional Stability of the Electron Beam in the NSLS Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3394-3397.
- W. Chupp et al., “Operating Experience with a High Current Cs! Injector for Heavy Ion Fusion”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3389-3392.
Back to search