Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Kaspar, “The Prestripper Accelerator of the Unilac”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper B04, pp. 73-80.
[n] J. V. Quentino, M. B. Alves, and F. H. de S?í, “Emittance Exchange at Sirius Booster for Storage Ring Injection Improvement”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2722-2725. doi:10.18429/JACoW-IPAC2022-THPOPT056
[n] J. Saunders et al., “Status of SRF Facilities at SNS”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC108, pp. 2471-2473.
[n] K. Ohmi et al., “Study of Beam-beam Issue for KEKB Crab Crossing”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP035, pp. 2596-2598.
[n] Y. H. Chin et al., “Performance of Transverse Intra-Bunch Feedback System at J-PAC MR”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO3AB01, pp. 384-388.
[n] K. Sakaue, K. Tamai, M. Washio, and J. Urakawa, “Design of a Chirping Cell Attached RF Gun for Ultrashort Electron Generation”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC058, pp. 1129-1131.
[n] Y. Jongen, M. Abs, S. Zaremba, T. Delvigne, and A. Herer, “Realignment of a Diverging Electron Beam: A New Beam Delivery System for Rhodotrons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P103, pp. 3857-3859.
[n] D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3621-3623. doi:10.18429/JACoW-IPAC2017-WEPVA150
[n] I. Carvalho de Almeida, A. Pontes Barbosa Lima, and B. Ramos, “Impedance characterization of the RF-shielded bellows for Sirius SRF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3439-3441. doi:10.18429/JACoW-IPAC2023-WEPL143
[n] T. Tajima, H. Miwa, Co. Ltd, and H. Ohta, “Evaluation of Dust Particles in the KEK Clean Room and Cleaning Methods Used for SC Cavity Assembly”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I38, pp. XX-XX.
[n] J. Kamenik, “Management System Based on Open Source Tools”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_010.
[n] K. Mernick, M. Blaskiewicz, and J. M. Brennan, “Full 3D Stochastic Cooling at RHIC”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOZAA2, pp. 41-45.
[n] F. Massimo et al., “Efficient Plasma Wakefield Acceleration Simulations via Kinetic-Hydro Code Architect”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 175-177. doi:10.18429/JACoW-ICAP2015-THDWC1
[n] E. D. van Garderen, G. LeBlanc, A. C. Starritt, K. Zingre, and M. L. M. ten Have, “Upgrade of the Timing System at the Australian Synchrotron”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD27, pp. 357-359.
[n] D. J. Adams, A. I. Borden, A. H. Kershaw, C. M. Warsop, and D. M. Wright, “Development of the ISIS Synchrotron Diagnostics”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP24C, pp. 1629-1631.
[n] A. R. D. Rodrigues et al., “Sirius Status Update”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1381-1384. doi:10.18429/JACoW-IPAC2019-TUPGW003
[n] A. Endo et al., “Cryogenically Cooled 1J, ps Yb:YAG Slab Laser for High-brightness Laser-Compton X-Ray Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2056-2058. doi:10.18429/JACoW-IPAC2014-WEPRO050
[n] P. V. Verdier, R. Bourtembourg, J-F. B. Bouteille, P. Falaise, and J. M. Koch, “ESRF Ramping Injector Power Supply Controlled by Tango”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 739-740. doi:10.18429/JACoW-ICALEPCS2017-TUPHA139
[n] G. F. Dell, “Studies of the Chromatic Properties and Dynamic Aperture of the BNL Colliding Beam Accelerator”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2469-2472.
[n] M. Furman, “Formation and Dissipation of the Electron Cloud”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPC001, pp. 297-301.
[n] P. Bauer, G. Ambrosio, L. Imbasciati, V. V. Kashikhin, M. Lamm, and A. V. Zlobin, “Quench Protection of High Field Nb3Sn Magnets for VLHC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH095, pp. 3454-3456.
[n] K. Hatanaka et al., “Developments of HTS Magnets at RCNP”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TUPSH011, pp. 242-244.
[n] K. P. Wootton, H. Cease, M. Erdmann, S. M. Oprondek, M. Ramanathan, and B. X. Yang, “X-Ray Beam Position Monitor Silicon Photodiode Measurements for the Advanced Photon Source Upgrade”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 46-50. doi:10.18429/JACoW-IBIC2020-TUPP10
[n] L. Crescimbeni et al., “Axial Cryogenic Current Comparator (CCC) for FAIR”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 259-262. doi:10.18429/JACoW-IBIC2023-TUP034
[n] E. Schneidmiller and M. V. Yurkov, “Studies of Harmonic Lasing Self-seeded FEL at FLASH2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 725-728. doi:10.18429/JACoW-IPAC2016-MOPOW009
[n] V. Ziemann, “Modeling and Tuning the Beam Lines of the Svedberg Laboratory”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP117G, pp. 2480-2481.
[n] R. T. Dowd, G. LeBlanc, and K. Zingre, “Linac Waveguide Upgrade at the Australian Synchrotron Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC001, pp. 62-64.
[n] B. J. Liu, G. Bassato, M. G. Giacchini, M. Montis, and M. Poggi, “Upgrade of Beam Diagnostics System of ALPI-PIAVE Accelerator's Complex at LNL”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO018, pp. 72-74.
[n] A. Feschenko, L. V. Kravchuk, and V. L. Serov, “INR High Intensity Proton Linac. Status and Prospects.”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 49-51. doi:10.18429/JACoW-RUPAC2016-TUZMH02
[n] L. J. Mao et al., “Electron Cooling Force Measurements with Variable Profile Electron Beam in HIRFL-CSRm”, in Proc. COOL'09, Lanzhou, China, Aug.-Sep. 2009, paper THM1MCCO03, pp. 107-110.
[n] R. Bourtembourg, J. L. Pons, and P. V. Verdier, “How Cassandra Improves Performances and Availability of HDB++ Tango Archiving System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 685-688. doi:10.18429/JACoW-ICALEPCS2015-WEM310
[n] A. Kuhl et al., “Sensitivity and Tolerance Analysis of a New Bunch Arrival-time Monitor Pickup Design for FLASH and XFEL”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC079, pp. 1186-1188.
[n] S. Y. Lee, “A Multiple Expansion for the Field of Vacuum Chamber EDDY Currents”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1771-1774.
[n] Yu. A. Bashmakov, K. A. Belovintsev, V. A. Karpov, and P. N. Lebedev, “An Extraction of Electrons from a Synchrotron on Fourth Order Resonance”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1601-1604.
[n] M. Pivi and M. Furman, “Mitigation of the Electron-Cloud Effect in the PSR and SNS Proton Storage Rings by Tailoring the Bunch Profile”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPG024, pp. 3222-3224.
[n] S. V. Shchelkunov, J. L. Hirshfield, S. Kazakov, N. Solyak, V. P. Yakovlev, and V. E. Teryaev, “High-Power Low-Voltage Multi-Beam Klystrons for ILC and Project-X”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO19, pp. 978-980.
[n] A. E. Candel et al., “Numerical Verification of the Power Transfer and Wakefield Coupling in the CLIC Two-beam Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOOCS2, pp. 51-55.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Kaspar, “The Prestripper Accelerator of the Unilac”, in Proc. 1976 Proton Linear Accelerator Conf. (LINAC'76), Chalk River, Canada, Sep. 1976, paper B04, pp. 73-80.
- J. V. Quentino, M. B. Alves, and F. H. de S?í, “Emittance Exchange at Sirius Booster for Storage Ring Injection Improvement”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2722-2725.
- J. Saunders et al., “Status of SRF Facilities at SNS”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC108, pp. 2471-2473.
- K. Ohmi et al., “Study of Beam-beam Issue for KEKB Crab Crossing”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP035, pp. 2596-2598.
- Y. H. Chin et al., “Performance of Transverse Intra-Bunch Feedback System at J-PAC MR”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO3AB01, pp. 384-388.
- K. Sakaue, K. Tamai, M. Washio, and J. Urakawa, “Design of a Chirping Cell Attached RF Gun for Ultrashort Electron Generation”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC058, pp. 1129-1131.
- Y. Jongen, M. Abs, S. Zaremba, T. Delvigne, and A. Herer, “Realignment of a Diverging Electron Beam: A New Beam Delivery System for Rhodotrons”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P103, pp. 3857-3859.
- D. L. Brown, X. Geng, S. W. Lee, M. Wezensky, and A. P. Zhukov, “New Controller for High Voltage Converter Modulator at Spallation Neutron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3621-3623.
- I. Carvalho de Almeida, A. Pontes Barbosa Lima, and B. Ramos, “Impedance characterization of the RF-shielded bellows for Sirius SRF cavities”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL143, pp. 3439-3441.
- T. Tajima, H. Miwa, Co. Ltd, and H. Ohta, “Evaluation of Dust Particles in the KEK Clean Room and Cleaning Methods Used for SC Cavity Assembly”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I38, pp. XX-XX.
- J. Kamenik, “Management System Based on Open Source Tools”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O3_010.
- K. Mernick, M. Blaskiewicz, and J. M. Brennan, “Full 3D Stochastic Cooling at RHIC”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOZAA2, pp. 41-45.
- F. Massimo et al., “Efficient Plasma Wakefield Acceleration Simulations via Kinetic-Hydro Code Architect”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. 175-177.
- E. D. van Garderen, G. LeBlanc, A. C. Starritt, K. Zingre, and M. L. M. ten Have, “Upgrade of the Timing System at the Australian Synchrotron”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD27, pp. 357-359.
- D. J. Adams, A. I. Borden, A. H. Kershaw, C. M. Warsop, and D. M. Wright, “Development of the ISIS Synchrotron Diagnostics”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP24C, pp. 1629-1631.
- A. R. D. Rodrigues et al., “Sirius Status Update”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1381-1384.
- A. Endo et al., “Cryogenically Cooled 1J, ps Yb:YAG Slab Laser for High-brightness Laser-Compton X-Ray Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2056-2058.
- P. V. Verdier, R. Bourtembourg, J-F. B. Bouteille, P. Falaise, and J. M. Koch, “ESRF Ramping Injector Power Supply Controlled by Tango”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 739-740.
- G. F. Dell, “Studies of the Chromatic Properties and Dynamic Aperture of the BNL Colliding Beam Accelerator”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2469-2472.
- M. Furman, “Formation and Dissipation of the Electron Cloud”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPC001, pp. 297-301.
- P. Bauer, G. Ambrosio, L. Imbasciati, V. V. Kashikhin, M. Lamm, and A. V. Zlobin, “Quench Protection of High Field Nb3Sn Magnets for VLHC”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH095, pp. 3454-3456.
- K. Hatanaka et al., “Developments of HTS Magnets at RCNP”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TUPSH011, pp. 242-244.
- K. P. Wootton, H. Cease, M. Erdmann, S. M. Oprondek, M. Ramanathan, and B. X. Yang, “X-Ray Beam Position Monitor Silicon Photodiode Measurements for the Advanced Photon Source Upgrade”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 46-50.
- L. Crescimbeni et al., “Axial Cryogenic Current Comparator (CCC) for FAIR”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper TUP034, pp. 259-262.
- E. Schneidmiller and M. V. Yurkov, “Studies of Harmonic Lasing Self-seeded FEL at FLASH2”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 725-728.
- V. Ziemann, “Modeling and Tuning the Beam Lines of the Svedberg Laboratory”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP117G, pp. 2480-2481.
- R. T. Dowd, G. LeBlanc, and K. Zingre, “Linac Waveguide Upgrade at the Australian Synchrotron Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC001, pp. 62-64.
- B. J. Liu, G. Bassato, M. G. Giacchini, M. Montis, and M. Poggi, “Upgrade of Beam Diagnostics System of ALPI-PIAVE Accelerator's Complex at LNL”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO018, pp. 72-74.
- A. Feschenko, L. V. Kravchuk, and V. L. Serov, “INR High Intensity Proton Linac. Status and Prospects.”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 49-51.
- L. J. Mao et al., “Electron Cooling Force Measurements with Variable Profile Electron Beam in HIRFL-CSRm”, in Proc. 7th Workshop on Beam Cooling and Related Topics (COOL'09), Lanzhou, China, Aug.-Sep. 2009, paper THM1MCCO03, pp. 107-110.
- R. Bourtembourg, J. L. Pons, and P. V. Verdier, “How Cassandra Improves Performances and Availability of HDB++ Tango Archiving System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 685-688.
- A. Kuhl et al., “Sensitivity and Tolerance Analysis of a New Bunch Arrival-time Monitor Pickup Design for FLASH and XFEL”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC079, pp. 1186-1188.
- S. Y. Lee, “A Multiple Expansion for the Field of Vacuum Chamber EDDY Currents”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1771-1774.
- Yu. A. Bashmakov, K. A. Belovintsev, V. A. Karpov, and P. N. Lebedev, “An Extraction of Electrons from a Synchrotron on Fourth Order Resonance”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1601-1604.
- M. Pivi and M. Furman, “Mitigation of the Electron-Cloud Effect in the PSR and SNS Proton Storage Rings by Tailoring the Bunch Profile”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPG024, pp. 3222-3224.
- S. V. Shchelkunov, J. L. Hirshfield, S. Kazakov, N. Solyak, V. P. Yakovlev, and V. E. Teryaev, “High-Power Low-Voltage Multi-Beam Klystrons for ILC and Project-X”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPHO19, pp. 978-980.
- A. E. Candel et al., “Numerical Verification of the Power Transfer and Wakefield Coupling in the CLIC Two-beam Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOOCS2, pp. 51-55.
Back to search