Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Xiao and V. Sajaev, “Simulation Study of Injection Performance for the Advanced Photon Source Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1816-1818. doi:10.18429/JACoW-IPAC2015-TUPJE075
[n] X. P. Ding et al., “Generation and Analysis of Subpicosecond Double Electron Bunch at the Brookhaven Accelerator Test Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS059, pp. 4132-4134.
[n] J. M. Kr?ñmer et al., “Electron Beam Final Focus System for Thomson Scattering at ELBE”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2995-2997. doi:10.18429/JACoW-IPAC2014-THPRO055
[n] V. Gubin et al., “Experimental Facility for E-Beam Irradiation Test of Prototype IF Target in RISP”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 254-256. doi:10.18429/JACoW-RUPAC2016-TUPSA018
[n] P. Jain, R. Kumar, P. K. Nema, P. Singh, and V. L. SR. sista, “Thermo-structural Analysis of 400 KeV Deuteron RFQ Components”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA093, pp. 235-237.
[n] C. Chen, B. Zhang, Z. Xu, R. Liu, R. Yang, and P. Ding, “Laser transport and stabilization for the CSNS laser wire profile monitor prototype”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 442-445. doi:10.18429/JACoW-IBIC2025-TUPCO38
[n] S. Myers, “Stabilization of the Fast Head-Tail Instability by Feedback”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 503-508.
[n] D. T. Fourie, “NEW BEAM LINES FOR THE PRODUCTION OF RADIOISOTOPES AT ITHEMBA LABS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P08, pp. XX-XX.
[n] B. J. A. Shepherd, J. A. Clarke, and N. A. Collomb, “Construction and Measurement of Novel Adjustable Permanent Magnet Quadrupoles for CLIC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD016, pp. 3530-3532.
[n] W. Wan, J. Feng, and H. A. Padmore, “Design Study on a New Separator for PEEM3”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPE076, pp. 3985-3987.
[n] E. Acerbi, C. Birattari, M. Castiglioni, C. DeMartinis, and F. G. Resmini, “H- Beam Intensity Improvements at the Milan AVF Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper E-13, pp. 386-389.
[n] W. Lu et al., “Designing LWFA in the Blowout Regime”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS023, pp. 3050-3051.
[n] R. N. Litunovsky and V. Nikolaev, “Central Region of 240 - cm Variable Energy Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-004, pp. XX-XX.
[n] C. K. Sinclair et al., “The Cornell ERL Prototype Project”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOAC005, pp. 192-194.
[n] P. Rauer, I. Bahns, W. Decking, W. Hillert, J. Ro?ƒbach, and H. Sinn, “Integration of an XFELO at the European XFEL Facility”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 62-65. doi:10.18429/JACoW-FEL2019-TUP009
[n] J. D. Fox, T. Mastorides, C. H. Rivetta, D. Teytelman, and D. Van Winkle, “Lessons Learned from PEP-II LLRF and Longitudinal Feedback”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEOBM02, pp. 1953-1955.
[n] K. Yu, V. Samulyak, M. Chung, B. T. Freemire, A. V. Tollestrup, and K. Yonehara, “Simulation of Beam-Induced Plasma in Gas Filled Cavities”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 731-733. doi:10.18429/JACoW-IPAC2015-MOPMN013
[n] C. Montag et al., “Observation of Beam-induced Abort Kicker Ferrite Heating in RHIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3648-3650. doi:10.18429/JACoW-IPAC2016-THPMW043
For LaTeX
Use Complete Form
For BibTeX
References
- A. Xiao and V. Sajaev, “Simulation Study of Injection Performance for the Advanced Photon Source Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1816-1818.
- X. P. Ding et al., “Generation and Analysis of Subpicosecond Double Electron Bunch at the Brookhaven Accelerator Test Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS059, pp. 4132-4134.
- J. M. Kr?ñmer et al., “Electron Beam Final Focus System for Thomson Scattering at ELBE”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2995-2997.
- V. Gubin et al., “Experimental Facility for E-Beam Irradiation Test of Prototype IF Target in RISP”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 254-256.
- P. Jain, R. Kumar, P. K. Nema, P. Singh, and V. L. SR. sista, “Thermo-structural Analysis of 400 KeV Deuteron RFQ Components”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA093, pp. 235-237.
- C. Chen, B. Zhang, Z. Xu, R. Liu, R. Yang, and P. Ding, “Laser transport and stabilization for the CSNS laser wire profile monitor prototype”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 442-445.
- S. Myers, “Stabilization of the Fast Head-Tail Instability by Feedback”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 503-508.
- D. T. Fourie, “NEW BEAM LINES FOR THE PRODUCTION OF RADIOISOTOPES AT ITHEMBA LABS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P08, pp. XX-XX.
- B. J. A. Shepherd, J. A. Clarke, and N. A. Collomb, “Construction and Measurement of Novel Adjustable Permanent Magnet Quadrupoles for CLIC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD016, pp. 3530-3532.
- W. Wan, J. Feng, and H. A. Padmore, “Design Study on a New Separator for PEEM3”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPE076, pp. 3985-3987.
- E. Acerbi, C. Birattari, M. Castiglioni, C. DeMartinis, and F. G. Resmini, “H- Beam Intensity Improvements at the Milan AVF Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper E-13, pp. 386-389.
- W. Lu et al., “Designing LWFA in the Blowout Regime”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS023, pp. 3050-3051.
- R. N. Litunovsky and V. Nikolaev, “Central Region of 240 - cm Variable Energy Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper A-004, pp. XX-XX.
- C. K. Sinclair et al., “The Cornell ERL Prototype Project”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOAC005, pp. 192-194.
- P. Rauer, I. Bahns, W. Decking, W. Hillert, J. Ro?ƒbach, and H. Sinn, “Integration of an XFELO at the European XFEL Facility”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 62-65.
- J. D. Fox, T. Mastorides, C. H. Rivetta, D. Teytelman, and D. Van Winkle, “Lessons Learned from PEP-II LLRF and Longitudinal Feedback”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEOBM02, pp. 1953-1955.
- K. Yu, V. Samulyak, M. Chung, B. T. Freemire, A. V. Tollestrup, and K. Yonehara, “Simulation of Beam-Induced Plasma in Gas Filled Cavities”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 731-733.
- C. Montag et al., “Observation of Beam-induced Abort Kicker Ferrite Heating in RHIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3648-3650.
Back to search
